Cutting knives - Import export

Biofilms consist of a wide variety of raw materials or combinations of raw materials. They have very specific material properties. Knives need to be matched to these properties to produce cuts, serrated cuts, tabs, tear-off aids, etc. And all that with the reliability and speed that produces organic and economical joy.

Cutting, punching, perforating, folding and register cutting are among the most important work steps in the production process. These are the main tasks of our knives – used in a wide variety of ways, for applications on various types of machines. With excellent repeat performance and optimally protected against wear and tear, for highly profitable knife inserts and tool life.

Extremely durable materials place extreme demands on the knives with which they are processed. Our knives are customized for a wide variety of material mixtures and therefore perform excellently in cold and hot cutting processes.

Your foil and processing requirements determine our knife design. Regardless of whether the foil should be impermeable or permeable, vacuumable or sealable, tearable or much more, they will be cut reliably with the best possible knife.

We develop precision-cut knives for a wide variety of foils. Irrespective of whether the foils are extra thin, unusually thick, viscous or elastic, or whether they are shrink-wrapped, printed, finished, environmentally friendly or else biofoils - we supply the best knives.

We develop precision-cut knives for a wide variety of foils. Irrespective of whether the foils are extra thin, unusually thick, viscous or elastic, or whether they are shrink-wrapped, printed, finished, environmentally friendly or else biofoils - we supply the best knives.

We develop precision-cut knives for a wide variety of foils. Irrespective of whether the foils are extra thin, unusually thick, viscous or elastic, or whether they are shrink-wrapped, printed, finished, environmentally friendly or else biofoils - we supply the best knives.

Durable smooth cuts in tough composite materials and resilient aluminum along with punch openings for spouts are important tasks that our composite knives fulfill admirably.

Your foil and processing requirements determine our knife design. Regardless of whether the foil should be impermeable or permeable, vacuumable or sealable, tearable or much more, they will be cut reliably with the best possible knife.

Biofilms consist of a wide variety of raw materials or combinations of raw materials. They have very specific material properties. Knives need to be matched to these properties to produce cuts, serrated cuts, tabs, tear-off aids, etc. And all that with the reliability and speed that produces organic and economical joy.

We develop precision-cut knives for a wide variety of foils. Irrespective of whether the foils are extra thin, unusually thick, viscous or elastic, or whether they are shrink-wrapped, printed, finished, environmentally friendly or else biofoils - we supply the best knives.

We develop precision-cut knives for a wide variety of foils. Irrespective of whether the foils are extra thin, unusually thick, viscous or elastic, or whether they are shrink-wrapped, printed, finished, environmentally friendly or else biofoils - we supply the best knives.

We develop precision-cut knives for a wide variety of foils. Irrespective of whether the foils are extra thin, unusually thick, viscous or elastic, or whether they are shrink-wrapped, printed, finished, environmentally friendly or else biofoils - we supply the best knives.

We develop precision-cut knives for a wide variety of foils. Irrespective of whether the foils are extra thin, unusually thick, viscous or elastic, or whether they are shrink-wrapped, printed, finished, environmentally friendly or else biofoils - we supply the best knives.

We develop precision-cut knives for a wide variety of foils. Irrespective of whether the foils are extra thin, unusually thick, viscous or elastic, or whether they are shrink-wrapped, printed, finished, environmentally friendly or else biofoils - we supply the best knives.

We develop precision-cut knives for a wide variety of foils. Irrespective of whether the foils are extra thin, unusually thick, viscous or elastic, or whether they are shrink-wrapped, printed, finished, environmentally friendly or else biofoils - we supply the best knives.

We develop precision-cut knives for a wide variety of foils. Irrespective of whether the foils are extra thin, unusually thick, viscous or elastic, or whether they are shrink-wrapped, printed, finished, environmentally friendly or else biofoils - we supply the best knives.

We develop precision-cut knives for a wide variety of foils. Irrespective of whether the foils are extra thin, unusually thick, viscous or elastic, or whether they are shrink-wrapped, printed, finished, environmentally friendly or else biofoils we supply the best knives.

We develop precision-cut knives for a wide variety of foils. Irrespective of whether the foils are extra thin, unusually thick, viscous or elastic, or whether they are shrink-wrapped, printed, finished, environmentally friendly or else biofoils - we supply the best knives.

Durable smooth cuts in tough composite materials and resilient aluminum along with punch openings for spouts are important tasks that our composite knives fulfill admirably.

Square cartridge heaters are used where much power has to be installed near the surface of a tool, e.g. in cutting knives, sealing stations or hot plates. With a soft, malleable condition in stainless steel or nickel sheath square cartridge heaters can easily be pressed into common milled rectangular grooves. Apart from the advantageous heat transfer over ¾ of the sheath, it is not necessary to cement or cast in the heater which is imperative for round cartridge heaters. Unlike tubular heaters which are also available in square sections (see chapter Flexible Heating Pipes), the square cartridge heaters have the termination on one side and can be loaded with 16W/cm² (2.5W/in²) due to their special inside construction.

Lubrication of valve seals, collars, O-rings, drives, piston rods and guides Lubrication of slides, slat-band and roller chains Lubrication of cutting knives as well as of needles and lifters of knitting machines Dismantling of rusted-in parts and removal of oil and greasy soiling Advantages and benefits NSF H1 registered Highly effective due to good creep properties Broad range of uses Displaces water Duolabel Clean the surfaces for optimal effect. Apply OKS 370 with a brush, drip oiler or by immersion or using a suitable automatic lubrication system locations to be lubricated. Spray on evenly OKS 371 spray. Avoid excesses. In as far as available, observe the machine manufacturer's instructions. Assess the lubrication frequency and quantity on the basis of the service conditions. Caution: Only mix with suitable lubricants.

Lubrication of valve seals, collars, O-rings, drives, piston rods and guides Lubrication of slides, slat-band and roller chains Lubrication of cutting knives as well as of needles and lifters of knitting machines Dismantling of rusted-in parts and removal of oil and greasy soiling Advantages and benefits NSF H1 registered Highly effective due to good creep properties Broad range of uses Displaces water OKS 370 is suitable for use with the OKS Airspray system Also available as spray version OKS 371 Clean the surfaces for optimal effect. Apply OKS 370 with a brush, drip oiler or by immersion or using a suitable automatic lubrication system locations to be lubricated. Spray on evenly OKS 371 spray. Avoid excesses. In as far as available, observe the machine manufacturer's instructions. Assess the lubrication frequency and quantity on the basis of the service conditions. Caution: Only mix with suitable lubricants.

Metzner has been developing and designing production machinery for tube machining for nearly three decades. Thanks to these many years of experience, today we can offer solutions that are adapted to the variety of different tube diameters and material properties. Wherever tubes have to be cut in very large quantities, impact knife machines are used. The Metzner Dynamat series achieves up to 4000 cuts per minute with one knife and, if required, an even higher cutting performance with multiple knives. Customers have the choice between "stop & go" cut or continuous cut. There are different machine sizes for materials of up to 120 mm diameter, which are prepared as standard for a wide range of peripheral equipment and knife moistening. The Dynamat machines process elastic materials reliably and with repetitive accuracy – from silicone tubes for the medical sector to fabric-reinforced tubes and profiles. No difference whether the material comes from an extruder or is unwound from a coil.

For punching film or plastic packaging, manufactured according to customer requirements

• cutting knife principle • with cap lifter in the handle • hardened knife and transport wheel