Current generators - Import export

Whether for use in a workshop, in living or working spaces – the combination of a robust construction, sound workmanship and discreet design harmoniously integrates in any environment, and the thermally insulated carrying handle makes the device quick and easy to transport. The desired temperature can be regulated as needed via the integrated infinitely variable thermostat of the TDS 50 M. For more targeted warmth, the heating capacity can be increased in two stages up to 9 kW. If required, the fan can also be used in sole fan operation without heating function. The TDS 50 M is powered by three-phase current, which is, however, not supplied to a conventional heating coil but to a durable PTC ceramic heating element integrated in this electric heater. In direct comparison, this does not only entail a more homogenous hot air current and a lower noise generation – the ceramic PTC heater battery also offers many additional assets.

ELECTRIC HEATER FAN TDS 120The thermal power plant among the TDS electric heater fans With a hefty 30 kW of heating power the TDS 120 is the undisputed No. 1 among the popular TDS electric heater fans from Trotec and offers you convenient spare capacity for the permanent heating of larger rooms or for temperature control in large-volume building sections. Owing to the integrated thermostat control, the generated warm air current can be infinitely adjusted to the desired temperature and regulated in line with demand via a two-stage power control for space-filling temperature control. And since our distinctive logo has been printed on the outside, we have also incorporated distinct extras inside, which make all the difference to conventional standard electric heater fans.

Lightweight, compact inverter power source for TIG manual or orbital welding (automatic detection) in conjunction with all Orbitec controllers. Technical Data: Output: DC Mains voltage: AC 1 x 230V Mains frequency: 50 / 60Hz Power rating: 4.4kVA Generator output: 7.5kVA Current range: 5A – 200A Welding current: - 25% TIG / MMA: 200A — 60% TIG / MMA: 150A — 100% TIG / MMA: 120A Weight: 8.9kg Dimensions (L x W x H): 475 x 180 x 295mm Package includes: — Inverter — Power cable Optional: Cool 50 water cooling unit Inverter Tetrix 200 (auto-range) as an additional model (control range 5 - 200A \ 110 / 230V \ item number 1.2.0120): Same characteristics as Tetrix 200 inverter but an input voltage of 115VAC or 230VAC can be used. No switching required as the unit recognises the input voltage and adjusts automatically. Note: Maximum output of 150A when used with 115VAC.

Fixed gas detection system for oxygen, toxic and combustible gases This DIN – rail mounted modern control module saves space, money and installation time. One safe controller for all gases: Any combination of a sensor head plus control module is a complete gas detection system. This makes the Statox 501 so safe and reliable. The Statox 501 also gives you the opportunity to alter or expand existing systems with minimum cost and labor. Programs for all gases and measuring ranges are permanently stored in the memory of the controller. The user-friendly software program allows authorized personnel to select different configurations by a simple push of a button. Easy to install and easy to use The controll modules as well as the power supply and the common alarm module clip on to a DIN rail. The remote sensor heads and any alarm or recording devices connect to terminals on the front of the module. Each Statox 501 control module has three relays for alarm 1 and 2 and system failure (115 / 230 V AC / 2 A). An analog output for recorder or process control systems is also included. Measured values are displayed on a 4 digit LED-display. It is easy to program or calibrate the Statox 501! Just follow the menu! If intrinsically safe transmitters are to be installed in division 1 areas, they can be connected via intrinsically safe repeaters. 24 V power supply as well as the signals for the common alarm module are transmitted via bus from one module to the next. All terminals are easily accessible from the front. Field proven sensors for reliable gas detection Compur manufactures electrochemical sensors for the detection of oxygen deficiency and toxic gases. These sensors generate an electrical current proportional to the actual gas concentration. The remote sensor heads are designed as intrinsically safe certified 4 - 20 mA transmitters and have an integrated concentration display. Combustible gases can be detected with a variety of catalytic beads (pellistors) or infrared technology. The sensor heads are certified "Ex d" or "Ex de" and can be connected directly to the control module, even if they are to be used in classified areas. The control module can supply and operate different designs of catalytic sensors. With so many possibilities, the system can easily be tailored to suit your individual application needs. Easy maintenance saves time and money Maintenance of the 4 – 20 mA transmitters is very easy. A one-man calibration or replacement of the sensors can be done without further precautions, even in classified areas. Accessories A range of wall-mount cabinets for a maximum of 5, 8 or 32 controllers as well as a 19”-carrier, ensure an easy professional installation. -20 - +60 °C

Vacuum lifting units for flexible, mains-free applications without bothersome power cables. Integrated batteries, battery voltage from a forklift or an integrated current generator are used to supply power. inquiry Example of use AERO-LIFT lifting devices with battery power Vacuum lifting device type AERO 250/1R-24V This mains free vacuum lifting device with battery power up to 250 kg. The own weight is only 29 kg. Additional are different suction plates or a additional battery pack possible. Type Art.No. Load Net weight Suction plates number/ Ø height AERO 250/1R-24V 1030703 250 kg 29 kg 1 / 350 mm 622 mm AERO 250/1R-24V Flex 1030704 250 kg - - - Vacuum lifting device type AERO 300/6R-24V-Fork lift Vacuum lifting device with battery power to handle metal sheets up to 300 kg with a fork lift truck or cran. Vacuum lifting device type AERO 500/1M-24V Vacuum lifter for stoneplates up to 2400 x 1200 mm...

Centrifugal Screening Vibration/rotation screening plants – the solution for fatty, oily and light products The vibration/rotation screening machine enables the screening of products that are difficult to screen and that would smear up screen inserts. This relates in particular to fat-containing and oiled products and products with very light bulk weights. For this purpose, an eddy current is generated by a wing rotating in screening half shells. Through targeted vibration overlays of the the outer screen fabric a seal of the fabric is prevented, thus ensuring a high-quality screening even for procedurally sensitive products. Technical data Screening area 0.5 or 0.9 m² Mesh width: 75-10,000 µm Product-contacting parts: Rustproof materials Cleanability: Completely cleanable Number of fractions: 2 Product feeding: Extractable dosing screw Throughput: Depends on mesh size and the product Number of plants: 2 Areas of application Grinding of soft products without temperature i

The MX-1000 is ideal for reading 1-D/2-D or DPM codes on automotive parts and label-based barcodes on packages and equipment. The flexible design accepts a variety of both current and future generation mobile devices and augments their capability in a fully ruggedized housing tough enough to stand up to the most challenging environments. The industrial-grade, rugged housing can handle up to 50 drops from 2 meters onto concrete. It is IP-65 sealed and uses inductive wireless charging so there are no exposed electrical contacts to wear out or fail.