Crane equipment - Import export

ZWP is one of Germany’s largest independent gear, pinion and shaft manufacturers. We manufacture according to customer drawings and supply renowned customers from a wide variety of industries. Here is an overview of our production possibilities: Gears and pinions internal and external toothed hardened and grinded Module 2 – 50 mm Diameter 100 – 2,000 mm Interlocking shafts internal and external toothed hardened and grinded Module 1 – 50 mm Diameter 50 – 500 mm Length up to 1,500 mm Internal toothed rings hardened and grinded Module up to 20 mm Diameter 100 to 1,800mm References to your industry on request We look forward hearing from you. Hardening and balancing inhouse possible Cooperation with companies for special manufacturing of gears and pinions etc We speak English.

Safe energy and data transmission The igus® Chainflex® cable range offers a choice of over 850 different cables, available from stock. A main focus of the range are the data and bus cables. Solutions based on copper, glass or plastic fiber optic cables are provided for almost all bus systems in industrial use. We continue to provide you with all supply cables for your drive systems such as motor cables with and without brake/tacho cables and the matching feed cables. Ready assembled with plugs and sockets on request. Cost-reducing assembly The use of pre-assembled E-ChainSystems® enables expensive assembly hours at the place of installation to be considerably reduced. Functionally tested systems guarantee that plant components are soon put into operation. Assembly service We would be pleased to send you an offer for complete solutions, including all assembly services. You do not tie up your own resources and you have a trouble-free energy supply system for the future at a fixed price. LBT FLIZZ® - High speeds and accelerations Travel distances up to 120m, travel speed up to 8 m/s Suitable for moving or stationary controls, ideal for all bus systems When light weight is required When quiet, maintenance-free operation is required When rust-proof property is required At -10°C to +60°C constant temperature At accelerations over 10 m/s² Energy supply system for all media, not only electrical Also suitable for outdoor use (with reduced load data) Your benefit from LBT FLIZZ® Guaranteed service life Cost-effective compared with conventional energy supply systems Cable protected against dirt, rain, sun, ice, snow and leaves Insensitive to wind and motion Good resistance to chemicals, solvents, etc. Use of special cables possible, e.g. servo drive cables, fiber optic cables, bus systems etc. almost maintenance free Quick and easy installation due to delivery as a ready-assembled system Easy integration with existing plants Cable length 50% of the travel distance No central cable junction No effort required to maintain carriages Sewage treatment plant Longitudinal scrapers Sand traps Rain water overflow reservoir Galvanizing equipment Cranes Plant construction Space-saving and compact energy supply with LBT FLIZZ® - low maintenance system, delivered pre-fitted with ready-assembled igus® E-Chain Energy supply system protected from wind and weathering. The used materials are weather-resistant, as well as resistant against most chemicals, oils, fats, coolants and solvents Solid plastic with powder-coated support tubes Modular assembly: the system can be enclosed with intermediate panels! Can be delivered pre-fitted Variable fields, which are simply screwed on top of each other Glide rail integrated in the profile

Our power supply lines and conductors are extremely rugged systems for supplying power and control signals to mobile equipment. They feature high transmission reliability and ease of installation and maintenance. And they are equally suitable for applications on cranes and other rail-mounted equipment. In harsh outdoor operating conditions and in dusty working environments. Depending on requirements, our power supply lines and conductors can be supplied in various designs with different numbers of poles.

Firm hold in any position Demag DBM battery magnets are the ideal solution wherever you need to transport magnetisable loads safely and efficiently. They can be used independently of a power supply and are therefore highly versatile. Whether used as stationary units with wall or slewing jib cranes or as mobile equipment with cranes or forklift trucks, Demag DBM battery magnets allow you to transport loads weighing up to 4 tons easily and safely from A to B. DBM battery magnet -Universal application -Compact design -High safety and reliability -High load capacity -Loads are always safely picked up -Automatic charging control Universal application -Outdoor operation also possible with IP43 enclosure (power source, charger and control elements combined into one unit) -Single metal sheets or plates can be separated from the load by flicking the toggle switch -High load capacities

Unloading is not enough. Moving in is our specialty. On arrival, we unload and position your machinery using appropriate lifting technology. This ensures that everything is in the right place from the word go. SCHOLPP lifting gantries are often our first choice for safely and precisely moving equipment. Where there’s little headroom, we employ air-­cushion technology. We can move equipment into tight spaces, even during ongoing production. SCHOLPP’s fleet of high-tech equipment is worth €30 million. It’s the largest of its kind in Europe. We ensure that all of our lifting gantries, cranes, installation equipment and transport vehicles are always fitted with the latest technologies available on the market. Whether you need us to completely relocate your system or just assemble part of a machine, to move equipment to the next town or to another continent, we have the equipment you need. SCHOLPP transports your machinery and systems securely and positions them exactly where you...

The MIXACO discharge stations are used for dust free emptying of the product into the further processing step (e.g. dosing system into an extruder). The container is fixed in place when moved into the discharge station. Two different executions are available: Type Guide fork Type Platform Differentiated by the way of feeding the container. Type Guide fork The movable container is pushed by means of its own wheels into the discharge station type guide fork and is locked in place. A pneumatic coupling is used to connect the discharge pipe to the container discharge valve. Type Platform The container is placed onto the emptying station with the aid of a lifting device (crane or forklift). Equipment Positioning of the container Pneumatic coupling between container and the further production step Pneumatic rotary cylinder for automatic opening / closing of the container discharge valve (0/90°)

Transported cargo: Slabs / Forgings / Heavy-weight metal blanks. Compatible equipment: Cranes / Spreader beams. Energy saving as per ton of the transported cargo / Heat-resistant version (cargo temperature up to 650°C) / Aluminium coil

Electromagnets for slabs, sheet steel in packs or single pieces, rectangular metal blanks, tubes in packs.High reliability and durability of the winding / Stability of lifting parameters in the operating process / Special design is available for operation in underwater conditions / Heat-resistant version (cargo temperature up to 650°C). Compatible equipment: Cranes / Spreader beams. Aluminium coil

From unloading to testing... We offer qualified assembling services for our manufactured products, if required also for free issue equipments. In case of assembly provided by costumer we allocate a supervisor during unloading and mounting on demand Additional assembly services Logistics on construction site Construcion site equipment Planning of crane assignments Providing of scaffolding Surface treatment onsite Testing and measuringn