Crane capacity - Import export

JDN Cranes The delivery programme comprises explosion-proof overhead travelling cranes suspension cranes as well as slewing cranes which can be adapted to your individual demands as complete special installations are our speciality. According to necessities JDN hoists in motor trolleys or monorail systems are integrated in the crane installation. A comfortable and user-friendly pneumatic speed control is also available as for example the standard two speed control for crane and trolley drive. An infinitely variable speed control of the trolley and the hoist is also possible. Different JDN Cranes in Detail overhead travelling crane with one or two main girders suspension crane also with minimised headroom - with special low headroom trolleys slewing crane crane with mechanically coupled synchronised hoists crane with parallel hoists carrying capacities up to 100 t with spans up to 36 m Higher carrying capacities and spans on request. JDN Crane Kits for explosion-proof air...

Crane Installations Energy capacity 450 Nm/cycle Stroke max. 62 mm For even more protection: The profile dampers from the TC range of the ACE TUBUS-Series can also be used as safety dampers. These maintenance-free, ready-to-install damping elements made of co-polyester elastomer have been specially developed for use in crane systems and fulfil the international industry standards OSHA and CMAA. In the special TC-S design, managed to achieve the spring rate required for crane systems with the unique dual concept. Whether TC-S or TC, this range of models represents a cost-effective solution with high energy absorption for energy management systems. The very small and light design of Ø 64 mm to Ø 176 mm progressively covers energy absorption within a range of 450 Nm to 17,810 Nm.

In this case, the innovation lies in that the concrete towers are built from the inside. in the traditional assembly the concrete tower is scaffolded from outside and then refi tted part by part. Not only is this extremely timeconsuming during the assembly, but also the setup of these scaffolds binds precious time resources and tower crane capacities. During the assembly of concrete segments with the Gplatform , the platform is connected inside the fi rst concrete ring by a mobile crane, in compliance with the requirements for passenger transport. If the following concrete tower segment is attached, the crane has already been positioned properly in order to elevate the Gplatform to the next level. After lowering the crane gear, the Gplatform is inserted and pulled to the next tower section. During the upward movement, the assembly operators must not leave the Gplatfom.

wivel jib crane 4551.015Swivel jib crane, galvanized, admissible load max. 175 kg, regulating capacity 275- 775 mm haacon concentrates on the business units General Lifting Technology, Commercial Vehicle Components and Lifting Systems in the B2B sector.

Bulk handling of any kind in sea and inland ports or storage facilities. The compact alternative to the MZG type grab for ship-to-ship, ship-to-storage/wagon/silo handling. For various types of crane with control systems designed for hydraulic motor grab systems. Technical design Designed as a discharge and ship unloading grab with retracted pivot bearings for easy grab under the ship’s gangway Optimisation of crane load capacity thanks to its lightweight design which can hold maximum loads Self-locking grab suspension for crane hooks Grab drive: Horizontal electrohydraulic drive unit with high-pressure pump Closing and opening movements are controlled through clockwise or counter clockwise rotation of the electric motor (turn control). The electric motor is only switched on whilst the closing and opening movement is being performed. Grab shells: Material: S355J2+N Grab connection bearing: re-greaseable, robust steel bushing bearing Small grab dimensions thanks

Slag handling in waste incineration plants or incineration plants of any kind. For various types of cranes with internal or external holding cables. Technical design Designed as a discharge grab with stable, retracted pivot bearings Optimisation of crane load capacity thanks to its lightweight design which can hold maximum loads Self-locking grab suspension for crane hooks Grab drive: Vertical electrohydraulic drive unit with high-pressure pump Closing and opening movements are controlled through clockwise or counter clockwise rotation of the electric motor (turn control). The electric motor is only switched on whilst the closing and opening movement is being performed. Closing and opening movements controlled by directly connected hydraulic cylinders, with stable piston rod protection Grab connection bearing Re-greaseable, robust steel bushing bearing KRÖGER MAINTENANCE-FREE bearing system Grab shells: Shell design adapted to material flow Toothed segment drive Material: S355J2+N

Waste incineration plants, refuse-derived fuel (RDF) incineration plants or incineration plants of any kind. For various types of cranes which operate using hooks or rope/chain suspension. Technical design Open shell design Suitable for handling all kinds of waste Optimisation of crane load capacity thanks to its lightweight design which can hold maximum loads Self-locking grab suspension for crane hooks Grab drive: Vertical electrohydraulic drive unit with high-pressure pump Closing and opening movements are controlled through clockwise or counter clockwise rotation of the electric motor (turn control). The electric motor is only switched on whilst the closing and opening movement is being performed. Closing and opening movements controlled by directly connected hydraulic cylinders, with stable piston rod protection Grab connection bearing: Re-greaseable, robust steel bushing bearing KRÖGER MAINTENANCE-FREE bearing system Stable shell structure with shells made out of S355J2+N

Handling timber, stacked wood, etc., for downstream industries, in sea and inland ports or at storage facilities. For ship-to-ship, ship-to-storage/wagon/lorry handling. For various types of crane with control systems designed for hydraulic grab systems. Technical design Designed to grip stacked wood, with two interlocking shells to grip one or several logs Optimisation of crane load capacity thanks to its lightweight design which can grip maximum amounts Slim shell design for optimal penetration Wear-resistant cutting edges The hydraulic system’s dimensions, short open and close times and high closing pressure guarantee the quick grab and secure hold of the logs Protected and easily accessible inbuilt electro-hydraulic propulsion motor Closing and opening movements are controlled through clockwise or counter clockwise rotation of the electric motor (turn control). The electric motor is only switched on whilst the closing and opening movement is being performed.

Bulk handling of any kind in sea and inland ports or storage facilities. For ship-to-ship, ship-to-storage/wagon/silo handling. For various types of crane with control systems designed for hydraulic motor grab systems. Technical design Designed as a discharge and ship unloading grab with retracted pivot bearings for easy gripping under the ship’s gangway Optimisation of crane load capacity thanks to its lightweight design which can hold maximum loads Grab drive: Vertical electrohydraulic drive unit with high-pressure pump Closing and opening movements are controlled through clockwise or counter clockwise rotation of the electric motor (turn control). The electric motor is only switched on whilst the closing and opening movement is being performed. Grab connection bearing: Re-greaseable steel bushing bearing Stable, torsion-resistant design using direct cylinder linkage

Handling general scrap, car bodies, steel chips, shredder scrap, paving stones and much more, in sea and inland ports or at storage facilities. For pier engineering and riverbed maintenance. For various types of cranes and excavators with internal or external holding cables. For various types of crane with control systems designed for hydraulic motor grab systems. Technical design Open, half-closed or closed grip design Suitable for handling scrap, stones, waste and other difficult to grab goods depending on design Optimisation of crane load capacity thanks to its lightweight design which can hold maximum loads, self-locking grab suspension for crane hooks Grab drive: Vertical electrohydraulic drive unit with high-pressure pump Closing and opening movements are controlled through clockwise or counter clockwise rotation of the electric motor (turn control). The electric motor is only switched on whilst the closing and opening movement is being performed. Grab connection bearing:

Canted profiles in XXL We cant almost every profile with our special tools. Most of the machines used at Göcke are specially constructed; tools for the sheet metal bending presses as well as stencils for sheet metal blanks are self-produced in-house at Göcke. At Göcke Umformtechnik, every desire of the customer and wish for appointments is turned into reality on modern DNC-controlled sheet metal bending presses. For this, we have available an extensive store depot, even special grades. - Cant profiles up to 21 m - Presses up to 3,000 t