Results for
FLEXOMAT GMBH
Germany
Flexomat know-how is the customer specific manufacturing of stainless steel corrugated hoses in various formats and dimensions. Flexomat stainless steel corrugated hoses are universally applicable and suitable for various media such as e.g. steam, water, oil, gas or chemical media. Corrugated hoses are applied to absorb movement and vibration or to compensate assembly inaccuracy. type SE: corrugated metal hoses, single-wall, medium wall thickness, standard pitch, one braid Typ SZ: corrugated metal hoses, single-wall, medium wall thickness, standard pitch, double braid Typ SEF: corrugated metal hoses, single-wall, medium wall thickness, low pitch, one braid Diameter DN6 up to DN300 Materials 1.4404 / AISI 316L oder 1.4541 / AISI 321 for the hose and 1.4301 / AISI 304 for the braid delivery length as standard length from stock or customer-specific-length after sprcification all common connectors according customer-specification DIN EN ISO 10380 DIN 3384 (DIN DVGW)
Request for a quoteFLEXOMAT GMBH
Germany
The term metal bellows refers to a structure that is composed of one or more stainless steel sleeves fitted into one another and is rendered elastic by the introduction of parallel corrugations. Metal bellows can be arranged to complete combinations of metal bellows (expansion joints). Thus, every specific requirement can be met. As raw material for the sleeve production, stainless steel strips or sheets with a thickness of 0.15 - 3 mm in the standard grades are used: 1.4541 / AISI 321 1.4571 / AISI 316Ti 1.4404 / AISI 316L 1.4307 / AISI 304L material with high chemical resistance and temperature resistance: 1.4435 / AISI 316L 1.4539 / AL 904L 1.4878 / AISI 321H 1.4828 / AISI 309 1.4462 / AISI 318 LN 1.4410 / AISI F53 or additional special materials: 1.4876 / Incoloy 800HT 2.4858 / Incoloy 825 2.4856 / Inconel 625 2.4816 / Inconel 600 2.4610 / Hastelloy C-4 2.4819 / Hastelloy C-276 2.4602 / Hastelloy C-22 3.7035 / Tit
Request for a quoteLOSBERGER GMBH
Germany
Solve your capacity issues in a quick and economical way, with our lightweight, aluminum frame-based Alustock. The Alustock is built for speed and can be erected in no time at all. In most cases, a foundation is not required. The robust, heavy-duty and high-quality canvas functions as a means to close the roof and gable in record time. The side cladding, which is made of trapezoidal corrugated sheet metal, adapts quickly and helps to protect the stored goods.
Request for a quoteFLEXOMAT GMBH
Germany
The term metal bellows refers to a structure that is composed of one or more stainless steel sleeves fitted into one another and is rendered elastic by the introduction of parallel corrugations. Metal bellows can be arranged to complete combinations of metal bellows (expansion joints). Thus, every specific requirement can be met. As raw material for the sleeve production, stainless steel strips or sheets with a thickness of 0.15 - 3 mm in the standard grades are used: 1.4541 / AISI 321 1.4571 / AISI 316Ti 1.4404 / AISI 316L 1.4307 / AISI 304L material with high chemical resistance and temperature resistance: 1.4435 / AISI 316L 1.4539 / AL 904L 1.4878 / AISI 321H 1.4828 / AISI 309 1.4462 / AISI 318 LN 1.4410 / AISI F53 or additional special materials: 1.4876 / Incoloy 800HT 2.4858 / Incoloy 825 2.4856 / Inconel 625 2.4816 / Inconel 600 2.4610 / Hastelloy C-4 2.4819 / Hastelloy C-276 2.4602 / Hastelloy C-22 3.7035 / Tit
Request for a quoteFLEXOMAT GMBH
Germany
The term metal bellows refers to a structure that is composed of one or more stainless steel sleeves fitted into one another and is rendered elastic by the introduction of parallel corrugations. Metal bellows can be arranged to complete combinations of metal bellows (expansion joints). Thus, every specific requirement can be met. As raw material for the sleeve production, stainless steel strips or sheets with a thickness of 0.15 - 3 mm in the standard grades are used: 1.4541 / AISI 321 1.4571 / AISI 316Ti 1.4404 / AISI 316L 1.4307 / AISI 304L material with high chemical resistance and temperature resistance: 1.4435 / AISI 316L 1.4539 / AL 904L 1.4878 / AISI 321H 1.4828 / AISI 309 1.4462 / AISI 318 LN 1.4410 / AISI F53 or additional special materials: 1.4876 / Incoloy 800HT 2.4858 / Incoloy 825 2.4856 / Inconel 625 2.4816 / Inconel 600 2.4610 / Hastelloy C-4 2.4819 / Hastelloy C-276 2.4602 / Hastelloy C-22 3.7035 / Tit
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
PRESSTECK S.P.A.
Germany
Thermostatic valves - i.e. the temperature controls on the heating system - are found in just about every home. In the head of a thermostatic valve there is a metal bellows, a corrugated tube that expands according to the room air temperature. For these metal bellows, the manufacturer needed deep-drawn, very long and thin-walled sleeves. The challenge: the sleeves must be matched to the customer's downstream process under very tight tolerance specifications. Why? Because the sleeves cannot be further processed if the geometries vary. Absolute precision is therefore required. We can offer absolute precision. The customer commissioned us with the production of the sleeves. On the one hand, because we fulfil the special deep-drawing requirements. On the other hand, because we can offer an associated, targeted heat treatment for material stress relief in-house.
Request for a quoteUNIFLEX-HYDRAULIK GMBH
Germany
Planetary cutting machine for corrugated metal and PTFE hoses. Cutting results that often eliminate an additional step. This completely unique planetary cutting machine delivers almost scrap-free production and high efficiency. With a completely variable centering clamp system, all hose OD to the maximum rating for the machine can be cut. Approximate cutting time is 25 seconds for 1 ¼“ (ø DN 32). Productive and ergonomic •No dramatic flaring of the stainless steel braid •Reduces or eliminates time-consuming manual preparatory work thereby increasing productivity and lowering costs •Centering hose clamp system •Shortest cut possible from 10 cm •Minimizes personnel costs and preparatory work •No wrapping/unwrapping with adhesive tape required •Clearly laid-out user friendly software on a panel with a 6“ color display screen •Large article memory promotes productivity •Reference run for optimal positioning of the cutting blade for cutting all hose diameters CE compliant
Request for a quoteIBK WIESEHAHN GMBH
Germany
Application - As high pressure hose at particularly high pressure levels for conducting steam, water, oil, compressed air and oxygen - For carrying aggressive media Hose design - Normal corrugated Full metal hose made of butt welded pipe, Heavy duty - Hose can be provided with no, one or two stainless steel braiding - Production according EN / ISO 10380 Material - Hose standard: HDA: AISI 316L - Braid standard: AISI 304 Temperature - From- 196°C up to max. + 600°C Also possible - With DVGW acceptance - CE sign as per the pressure equipment directive (97/23/EC) - As per DIN 2827 - With external Agraff or spirals to protect against abrasion - With internal Agraff hose or braiding as flow conductor - With flanged recoil lock - With PTFE inner lining - Special designs at customer request * Please refer to our resistance list in the download area
Request for a quoteIBK WIESEHAHN GMBH
Germany
Application - Ideal for conducting liquid and gaseous media as well as acids and lyes* - All applications which require the smallest possible bending radius and our hose type “Standard” cannot be deployed due to its larger bending radius - This type is also particularly recommended for use as a double hose line Hose design - Tight corrugated Full metal hose made of butt welded pipe - Hose can be provided with no, one or two stainless steel braiding - Production according EN / ISO 10380 Material - Hose standard: HFA: AISI 316L, HF: AISI 316Ti - Braid standard: AISI 304 Temperature - From- 196°C up to max. + 600°C Also possible - With DVGW acceptance - CE sign as per the pressure equipment directive (97/23/EC) - As per DIN 2827 - With external Agraff or spirals to protect against abrasion - With internal Agraff hose or braiding as flow conductor - With flanged recoil lock - With PTFE inner lining - Special designs at...
Request for a quoteIBK WIESEHAHN GMBH
Germany
Application - Ideal for conducting liquid and gaseous media as well as acids and lyes* - Also outstanding for absorbing lifting movements, such as on the covers of annealing and electric furnaces - And also as a compensator to absorb slight vibrations and noise Hose design - Normal corrugated Full metal hose made of butt welded pipe - Hose can be provided with no, one or two stainless steel braiding - Production according EN / ISO 10380 Material - Hose standard: STDA: AISI 316L, STD: AISI 316Ti - Braid standard: AISI 304 Temperature - From- 196°C up to max. + 600°C Also possible - With DVGW acceptance - CE sign as per the pressure equipment directive (97/23/EC) - As per DIN 2827 - With external Agraff or spirals to protect against abrasion - With internal Agraff hose or braiding as flow conductor - With flanged recoil lock - With PTFE inner lining - Special designs at customer request * Please refer to our resistance...
Request for a quoteJAKOB ANTRIEBSTECHNIK GMBH
Germany
• simple installation with radial EASY-clamping hub on both sides • 4-corrugation bellows - short design - high torsional stiffness • Torque range: 20 - 900 Nm • Shaft diameter: 10 - 75 mm
Request for a quoteResults for
Corrugated metal - Import exportNumber of results
12 ProductsCountries
Company type