Cooling pumps - Import export

Production of individual oil coolers according to customer requirements. Oneoff or series production with highperformance cores from Setrab in core depths of 3250mm.

Production of individual intercoolers according to customer requirements. Oneoff or series production with highperformance cores in core depths of 28120mm. Setrab oil cooler distributor for Germany with the largest stock in the EU.

Production of individual water coolers according to customer requirements. Oneoff or series production with highperformance cores in core depths of 18110mm

The new B3 Battery is a battery motor for demanding and efficient pump applications. The current-independent application range enables the greatest possible flexibility with the world's highest volume flow of a battery pump (up to 180 l/m). Perfectly suited for the extraction or transfer of mineral oils. * Media examples: Diesel, heating oil, hydraulic oil, machine oil and motor oil etc. * Pump tube equipped with Lutz original hand wheel * Suitable for filling or decanting alternative fuels Features & Advantages * wear-free, particularly low-noise BLDC motor *optimized drum emptying * Optimized Drum emptying *infinitely variable * extremely high performance with low weight * Maintenance without special tools * Sealing modules of the sealless (DL) pump can be replaced * long service life

The Drum pump is suitable for thin-bodied, aggressive and non-flammable media. Perfectly suited for the withdrawal or decanting of mineral oils. * Media examples: Diesel, heating oil, hydraulic oil, machine oil and motor oil etc. * Pump tube equipped with Lutz original hand wheel * Suitable for filling or decanting alternative fuels Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant ETFE shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are interchangeable * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌

Anti-vibration mats and pads for industry, machinery, compressors, cooling units, generators, pumps, buildings, construction, rails etc.

Anti-vibration mats and pads for industry, laboratories, machinery, measuring devices, compressors, cooling units, generators, pumps, buildings, construction, rails etc.

age 2005 chiller for water cooled cabinets pump- and circulation unit external condensator with 3 blowers Delivery time: immediately from stock Ref: QU200391A Please ask for price. We ship and install worldwide!

Oil pumps especially suitable for gearboxes and dizzerial cooling. These small and compact pumps are ideally suited for continuous running and high temperature applications.

Advantages The multiple options enable us to fulfill special customer requests in a flexible way. FAUDI Belt Filters have the ability to be installed on existing vessels or can be delivered as complete systems with vessels, pumps, heating, cooling and control systems. Area of application For the continuous cleaning of coolants, especially emulsions and oils of machine tools and cold rolling mills. For the filtration of liquids with a high demand on purity. The impurities may vary in size, shape and material. Flow rate Various filter sizes and the modular design enable any required flow rate. Interest in our products? Contact us! Download product brochure Classification number - Filter aid with Filtration degree 30-40 µm Medium liquids of the chemical industry Filter material non-woven fabric

Advantages The multiple options enable us to fulfill special customer requests in a flexible way. FAUDI Belt Filters have the ability to be installed on existing vessels or can be delivered as complete systems with vessels, pumps, heating, cooling and control systems. Area of application For the continuous cleaning of coolants, especially emulsions and oils of machine tools and cold rolling mills. For the filtration of liquids with a high demand on purity. The impurities may vary in size, shape and material. Flow rate Various filter sizes and the modular design enable any required flow rate. Interest in our products? Contact us! Download product brochure Classification number - Filter aid with Filtration degree 30-40 µm Medium oil, emulsion and water Filter material non-woven fabric

Advantages The multiple options enable us to fulfill special customer requests in a flexible way. FAUDI Belt Filters have the ability to be installed on existing vessels or can be delivered as complete systems with vessels, pumps, heating, cooling and control systems. Furthermore, the system enables an increased flow rate. Area of application For the continuous cleaning of coolants, especially emulsions and oils of machine tools and cold rolling mills. For the filtration of liquids with a high demand on purity. The impurities may vary in size, shape and material. Flow rate Various filter sizes and the modular design enable any required flow rate. Classification number - Filter aid without Filtration degree 30-100 µm Medium liquids of the chemical industry Filter material filter belt

Advantages The multiple options enable us to fulfill special customer requests in a flexible way. FAUDI Belt Filters have the ability to be installed on existing vessels or can be delivered as complete systems with vessels, pumps, heating, cooling and control systems. Furthermore, the system enables an increased flow rate. Area of application For the continuous cleaning of coolants, especially emulsions and oils of machine tools and cold rolling mills. For the filtration of liquids with a high demand on purity. The impurities may vary in size, shape and material. Flow rate Various filter sizes and the modular design enable any required flow rate. Classification number - Filter aid without Filtration degree 30-100 µm Medium oil, emulsion and water Filter material filter belt

A double head mitre saw with disappearing blades specifically studied for the tubular steel shapes. Automatic positioning of the movable unit. Electronic positioning of the cutting units on any angle within 45° and 135°. It is equipped with the system TS 690. Frontal and straight blade feed with speed adjustments. Hydro-pneumatic blade feed. Speed of rotation of the blades, variable by means of a frequency converter (inverter). Automatic shifting of the support plates of the profile once over the cutting cycle. Dynamic protection guards for a total covering of the cutting area. Blade lubrication cooling system with electric pump. Coolant liquid vat with extractable pump for vat cleaning. Cutting deepth stop device. Intermediate workpiece support automatically operating Mobile roller conveyor with pneumatic clamp for section support Compressed air treatment unit (filter/reducer/lubricator)

The compact Minichillers are an economic and environmentally friendly cooling solution for many laboratory applications. A calculation of water and waste water costs shows that a Minichiller can save up to 48,000 litres of water in a working week and due to its low procurement price, return on investment is achieved within a very short time. The units have small footprints, only requiring 225 x 360 mm on the laboratory bench and are therefore suitable for cooling reactor blocks, vacuum pumps, rotary evaporators or heat exchangers. Minichillers allow stable application conditions due to constant values for temperature, pressure and throughflow quantities. They are also perfect for continuous operation at ambient temperatures up to 40°C. Despite the economic purchase price the coolers are well equipped and have a large temperature indicator, fill level indicator, as well as status LEDs for the pump, cooling and heating. A 1 kW heater is optionally available with which the...

The compact Minichillers are an economic and environmentally friendly cooling solution for many laboratory applications. A calculation of water and waste water costs shows that a Minichiller can save up to 48,000 litres of water in a working week and due to its low procurement price, return on investment is achieved within a very short time. The units have small footprints, only requiring 225 x 360 mm on the laboratory bench and are therefore suitable for cooling reactor blocks, vacuum pumps, rotary evaporators or heat exchangers. Minichillers allow stable application conditions due to constant values for temperature, pressure and throughflow quantities. They are also perfect for continuous operation at ambient temperatures up to 40°C. Despite the economic purchase price the coolers are well equipped and have a large temperature indicator, fill level indicator, as well as status LEDs for the pump, cooling and heating. A 1 kW heater is optionally available with which the...

The compact Minichillers are an economic and environmentally friendly cooling solution for many laboratory applications. A calculation of water and waste water costs shows that a Minichiller can save up to 48,000 litres of water in a working week and due to its low procurement price, return on investment is achieved within a very short time. The units have small footprints, only requiring 225 x 360 mm on the laboratory bench and are therefore suitable for cooling reactor blocks, vacuum pumps, rotary evaporators or heat exchangers. Minichillers allow stable application conditions due to constant values for temperature, pressure and throughflow quantities. They are also perfect for continuous operation at ambient temperatures up to 40°C. Despite the economic purchase price the coolers are well equipped and have a large temperature indicator, fill level indicator, as well as status LEDs for the pump, cooling and heating. A 1 kW heater is optionally available with which the...

The compact Minichillers are an economic and environmentally friendly cooling solution for many laboratory applications. A calculation of water and waste water costs shows that a Minichiller can save up to 48,000 litres of water in a working week and due to its low procurement price, return on investment is achieved within a very short time. The units have small footprints and are therefore suitable for cooling reactor blocks, vacuum pumps, rotary evaporators or heat exchangers. Minichillers allow stable application conditions due to constant values for temperature, pressure and throughflow quantities. They are also perfect for continuous operation at ambient temperatures up to 40°C. Despite the economic purchase price the coolers are well equipped and have a large temperature indicator, fill level indicator, as well as status LEDs for the pump, cooling and heating. A heater is optionally available with which the temperature range can be extended to +100°C. Minichillers are...

The compact Minichillers are an economic and environmentally friendly cooling solution for many laboratory applications. A calculation of water and waste water costs shows that a Minichiller can save up to 48,000 litres of water in a working week and due to its low procurement price, return on investment is achieved within a very short time. The units have small footprints and are therefore suitable for cooling reactor blocks, vacuum pumps, rotary evaporators or heat exchangers. Minichillers allow stable application conditions due to constant values for temperature, pressure and throughflow quantities. They are also perfect for continuous operation at ambient temperatures up to 40°C. Despite the economic purchase price the coolers are well equipped and have a large temperature indicator, fill level indicator, as well as status LEDs for the pump, cooling and heating. A heater is optionally available with which the temperature range can be extended to +100°C. Minichillers are...

The compact Minichillers are an economic and environmentally friendly cooling solution for many laboratory applications. A calculation of water and waste water costs shows that a Minichiller can save up to 48,000 litres of water in a working week and due to its low procurement price, return on investment is achieved within a very short time. The units have small footprints and are therefore suitable for cooling reactor blocks, vacuum pumps, rotary evaporators or heat exchangers. Minichillers allow stable application conditions due to constant values for temperature, pressure and throughflow quantities. They are also perfect for continuous operation at ambient temperatures up to 40°C. Despite the economic purchase price the coolers are well equipped and have a large temperature indicator, fill level indicator, as well as status LEDs for the pump, cooling and heating. A heater is optionally available with which the temperature range can be extended to +100°C. Minichillers are...

The compact Minichillers are an economic and environmentally friendly cooling solution for many laboratory applications. A calculation of water and waste water costs shows that a Minichiller can save up to 48,000 litres of water in a working week and due to its low procurement price, return on investment is achieved within a very short time. The units have small footprints and are therefore suitable for cooling reactor blocks, vacuum pumps, rotary evaporators or heat exchangers. Minichillers allow stable application conditions due to constant values for temperature, pressure and throughflow quantities. They are also perfect for continuous operation at ambient temperatures up to 40°C. Despite the economic purchase price the coolers are well equipped and have a large temperature indicator, fill level indicator, as well as status LEDs for the pump, cooling and heating. A heater is optionally available with which the temperature range can be extended to +100°C. Minichillers are...

— For continuous feed water control — Increased efficiency of flue gas heat exchangers — Fewer pump circuits — Constant boiler water level — Minimum flow rate for cooling the feed pump is assured Highly efficient boiler systems with perfectly matched boiler house components ensure that low levels of energy consumption and emissions are achieved.

Cutter Pumps The cutter pumps of the series SFC are capable of cutting aluminium chips and similar materials and pumping of these materials along with the coolant fluid. An agitator located at the pump suction helps to break up and separate any large bundles of chips or birds nests which reach the pump suction. The specially made cutting unit (>60HRC) is cuting chips and the above located semi-open impeller allows with its large clearances to pump the particles along with the coolant fluid from the machine back to the filter. The SFC pumps are capable of handling chip to coolant ratios of up to 1.5% by weight. The SFC pumps are equipped with the user-friendly 45 degree flange connection which allows for either vertical or horizontal pipe connection and the connection of a pressure gauge with G 1/4. Volumetric delivery: up to 1700 l/min Delivery head: up to 45 m Please contact us for delivery quantity.

Suction Pumps are self-priming following the initial priming, and operate according to the bypass duct principle. We recommend pump models featuring bronze body elements for pumping water without anticorrosion additives. The dimensions are based on standard specification EN 12157. Impellers: open Fluids: coolants, cooling/cutting oils, fuel oil, water (with anticorrosive additive) Volumetric delivery: up to 52 l/min Delivery head: up to 16 m Please contact us for delivery quantity

Screw spindle pumps with their silicon carbide spindle housing and highly wear resistant spindles are capable of achieving extremely high pressures. Brinkmann high pressure screw pumps are designed for pumping filtered and lubricating fluids such as coolant oils andwatersoluble coolants. High pressure screw pumps are NOT designed for dry-running. Screw spindle pumps are positive displacement pumps which always require the installation of a pressure relief valve in order to prevent bursting. Volumetric delivery: up to 878 l/min Delivery pressure: up to 200 bar Please contact us for delivery quantity

Screw spindle pumps with their silicon carbide spindle housing and highly wear resistant spindles are capable of achieving extremely high pressures.Brinkmann high pressure screw pumps are designed for pumping filtered and lubricating fluids such as coolant oils andwatersoluble coolants. High pressure screw pumps are NOT designed for dry-running. Screw spindle pumps are positive displacement pumps which always require the installation of a pressure relief valve in order to prevent bursting. Volumetric delivery: up to 878 l/min Delivery pressure: up to 200 bar Please contact us for delivery quantity

Screw spindle pumps with their silicon carbide spindle housing and highly wear resistant spindles are capable of achieving extremely high pressures. Brinkmann high pressure screw pumps are designed for pumping filtered and lubricating fluids such as coolant oils andwatersoluble coolants. High pressure screw pumps are NOT designed for dry-running. Screw spindle pumps are positive displacement pumps which always require the installation of a pressure relief valve in order to prevent bursting. Volumetric delivery: up to 878 l/min Delivery pressure: up to 200 bar Please contact us for delivery quantity

Lifting pumps series TAA gently pump foam-sensitive cooling lubricants (emulsions or cooling and cutting oils) or highly inflated cooling lubricants such as occur with a high degree of machining in lathing, milling or grinding. Impellers: axial Fluids: coolants, emulsions, oils Volumetric delivery: up to 440 l/min Delivery head: up to 9 m Please contact us for delivery quantity

Quick Suctioning Immersion Pumpsseries TGL/SGL equipped with the patented "BRINKMANN`s Suction De-aeration System" are excellently suited to pumping extremely inflated fluids (grinding oils) as they occur in high-speed grinding. The quick suctioning immersion pumps reach stable working conditions as soon as the liquid level reaches the suction inlet. The SGL serie offers a flange with pressure gauge connection port. The flange can be rotated for either horizontal or vertical pipe connections. Volumetric delivery: up to 2600 l/min Delivery head: up to 88 m Please contact us for delivery quantity