Cooling head - Import export

Gas-cooled weld head for applications with extreme narrow space requirements as e.g. in the semiconductor industry. Specially designed to weld micro-fittings. Unique construction, including specifically directed gas routing to improve gas coverage and material selection resulting in a high duty cycle even without water cooling. — Extreme narrow / compact design — Simple design allows easy to maintain — Weld Head compatible with control element (start/stop kit with status display) — Arc Machines Model 9-500 cassettes will fit too

Our latest series of 3 gas-cooled weld heads technical optimized and in an new design covers the tube size ranges from 6mm – 114.3mm / 0.250” - 4.500”. Unique construction and material selection allows a high duty cycle even without water cooling. The weld heads are one of the narrowest on the market and have a ‘quick latch’ system for retaining the collets. For the high duty cycle applications we also offer the gas-cooled S series weld heads in a water-cooled SW-version (the overall width remains unchanged). Full water-cooling of the lower clamp housing. Also available as an upgrade for standard OSK S weld heads. Weld head type \ Field of application mm \ inch \ weight OSK 53 S + SW \ OD 6 - 53mm \ 0.250" - 2.087" \ 2.1kg OSK 76 S + SW \ OD 6 - 76.2mm \ 0.250" - 3.000" \ 2.6kg OSK 115 S + SW \ OD 9.53 - 114.3mm \ 0.375" - 4.500" \ 3.4kg OSK 170 GW \ OD 50 - 168.3mm \ 1.969" - 6.626" \ 7.5kg

Our latest series of gas-cooled and compact weld heads. They are for smaller outside diameters with a narrow handle for tighter access conditions. Weld head type \ Field of application mm \ inch \ weight OSK 21 CS \ OD 3.17 - 21.3mm \ 0.125" - 0.839" \ 0.8kg OSK 38 CS \ OD 3.17 - 38.1mm \ 0.125" - 1.500" \ 1.2kg —-- Our new generation of compact weld heads for high duty cycle requirements have watercooled clamp housings and clamping levers. Both OSK CW weld heads are operated using a sharable handle and cable assembly. Weld head type \ Field of application mm \ inch \ weight OSK 21 CW \ OD 3.17 - 21.3mm \ 0.125" - 0.839" \ 1.0kg OSK 38 CW \ OD 3.17 - 38.1mm \ 0.125" - 1.500" \ 1.4kg Only one drive unit is needed for all C and CW weld heads. —-- OSK 21 CB gas-cooled weld head with clamping block for tube-totube connectons incl. setting gauge for pipe Weld head type \ Field of application mm \ inch \ weight OSK21 CB \ OD 3.17 - 21.3mm \ 0.125" - 0.839" \ 1.0kg

The IKi3000 will always keep a cool head where efficiency and quality of your products are concerned. The cooling time reduction by up to 75% not only saves time and energy but also permits fastest passage through the critical temperature range for germ growth. It's a real improvement in hygiene and durability! Cooling times reduced by up to 75% Longer durability thanks to fastest passage through the critical temperature range for germ growth Less weight loss Less water consumption Additional steam cooking possible Optionally available with brine circuit Maximum flexibility thanks to construction kit system For processes with justintime production

GLYSANTIN® G30 (January 2017) GLYSANTIN® G30 is an ethylene glycol-based coolant that must be diluted with water before use . GLYSANTIN® G30 contains an inhibitor package based on organic acid salts (OAT coolants). GLYSANTIN® G30 is free of nitrites, amines, phosphates, borates and silicates. Properties GLYSANTIN® G30 provides excellent protection for engines against corrosion, overheating and frost. It effectively prevents corrosion and deposits in the cooling system with its important components such as cooling channels in the cylinder head and engine block, radiator, water pump and heater core exchanger. Meets the requirements of the following coolant standards: - AS 2108-2004 - ASTM D 3306 - ASTM D 4985 - BS 6580:2010 - CUNA NC 956-16 - AFNOR NFR 15-601 - Önorm V 5123 - JIS K 2234:2006 - SAE J1034 - SANS 1251:2005 - China GB 29743-2013 Officially approved by: - ​​Audi / Seat / Skoda / VW - Bentley / Lamborghini - DAF - Daimler

With tube-to-tubesheet weld heads, it is possible to achieve consistently high-quality, reproducible welding of tubes to tubesheets, with or without additional wire. The tubes to be welded can be flush with the tubesheet, offset, protruding or behind the tubesheet. The RBK 38 S and the RBK 60 S are our two new tube-to-tubesheet weld heads. The RBK 38 S is a small, handy water-cooled head for welding tubes to tubesheets up to an ID of 36.7 mm, without additional wire. Package includes: — Weld head — Water-cooled hose package, 6 m — Pull bar B — Gas hood ID 35 mm — 0° electrode holder — Transport case Optional: — Div. electrode holders for RBK 38 S — Div. gas hoods for RBK 38 S — Div. spring sleeves and pull bar sets for RBK 38 S

Where most lights often fail, ONE LED shows its true capabilities: restricted space and high temperatures – in some machines, you are faced with both of these problems. Thanks to its minimalist, but very robust construction, ONE LED even withstands very high temperatures, although its high-power LED display an enormous lighting power. • Maintenance-free LED technology • Strong high-power LED for maximum light • Robust die-cast housing with solid safety glass or plastic screen • High degree of protection • Ideal for high thermal stress • Quick and precise positioning • Direct connection to machine voltage • Connection via M12 plug connector or quick connector • Luminaires for daisy chaining

The pivoting-head luminaire ROCIA.focus offers maximum flexibility. The mobility of its pivoting head allows the light beam to be directed precisely to where it is needed. The extremely precise lighting allows focused and concentrated work – also thanks to different beam angles. • Maintenance-free LED technology • Strong high-power LEDs for maximum light • With narrow- or wide-beam illumination characteristic, as desired • Robust aluminium housing with solid safety glass screen • Viton® seal for high degree of protection • Chemically resistant to many media such as oils or cooling lubricants • Exactly adjustable pivoting head • Direct connection to machine voltage