Coolant - Import export

High-quality and modern coolants ensure maximum protection against high thermal loads in car and commercial vehicle engines. The use of modern coolants can extend the lifespan of engines and minimize potential damage as well as downtimes. We offer a wide range of coolants from our partners Aral and Castrol. Together we will find the right coolant to meet your specifications and requirements.

CLEANLIFE® gasoline is a pure refinery product and does not contain any crack products. In contrast to conventional gasoline, it does not contain any reactive substances that oxidize and polymerize, but is chemically stable and can therefore be stored for a long time. There are no deposits that negatively affect performance. CLEANLIFE® equipment gasoline 4-T is available without any oil admixture for lawnmowers, karts, generators, motorboats and other four-stroke engines. Advantages Significant reduction in the health burden for users Aromatics and sulfur content reduced to a minimum Free from benzene Clean, residue-free combustion Minimal Influence on the environment long shelf life

Antifreeze for motorcycles and scooters Description Castrol Motorcycle Coolant is a ready-to-use, premixed antifreeze based on ethylene glycol. It ensures frost protection down to -25 °C and should be changed every 2 years or according to the manufacturer's instructions. Suitable for all aluminum engines. Caution: Not suitable for use in magnesium alloy engines. Advantages - Optimal corrosion protection in the cooling system, thereby extending engine life - Excellent cooling and heat transfer properties - Protection of all cooling system components - Compatible with motorcycle paintwork - Offers frost protection down to -25° Celsius Specifications Based on coolant concentrate conforming to: ASTM D3306 (I) BS 6580:2010

For our customers in the automotive and housing industry, we produce deep-drawn stainless steel pots with an integrated axle as a monobloc component. These are used in water pumps for electric vehicles. Our customer from the automotive industry needs pots with an integrated axle that holds a rotor. Up to now, the pot and axle have been joined in a centred manner by means of welding. The customer's wish was to produce a one-piece component to avoid welding. Deep drawing is the ideal technology for this. The size of the component required larger presses than were previously available. Therefore, we first developed tools as prototypes for larger presses on behalf of the customer. After practical tests at the customer's premises as well as at the end customer's, our client decided on a tool that was ideally suited for the production of the component in series.

Is suitable for all engines and can be mixed with all coolants. Protects against frost, rust and overheating all year round. Other sizes available on request

Consisting of: 1x Windscreen antifreeze -60°C 500 ml 1x Window de-icer spray 500 ml 1x Door lock de-icer 50 ml 1x Clear cloth 1x Ice scraper. Other sizes available on request

Horizontal End-Suction Pumps are centrifugal inline pumps with a compact design where the impeller is mounted onto the extended motor shaft. These pumps are not self-priming and must be gravity fed. All pumps are equipped with a single mechanical seal. Upon request a second mechanical seal is available to allow for dry-running (-GD). This pump series is designed for horizontal installations next to a tank and for pumping air entrained coolant fluids, such as water-soluble coolants or cutting oils, as they occur in high speed turning, milling or grinding applications. The SBA pumps are equipped with the user-friendly (SAE) flange connection which allows for either vertical or horizontal pipe connection and the connection of a pressure gauge with G 1/4. Volumetric delivery: up to 2200 l/min Delivery head: up to 62 m Please contact us for delivery quantity.

Horizontal End-Suction Pumps are centrifugal inline pumps with a compact design where the impeller is mounted onto the extended motor shaft. These pumps are self-priming after initial filling. All pumps are equipped with a single mechanical seal. SBM Pumps are mounted next to or on top of the tank and they are suitable for pumping air entrained coolant fluids, such as water-soluble coolants or cutting oils, as they occur in high speed turning, milling or grinding applications. Volumetric delivery: up to 440 l/min Delivery head: up to 20 m Please contact us for delivery quantity.

Quick suctioning immersion pumps series SFL equipped with the patented "BRINKMANN's Suction De-aeration System" are excellently suited to pumping extremely inflated fluids (emulsions) with heavy chip loads as they occur in heavy cutting when turning, milling or grinding. The quick suctioning immersion pumps reach stable working conditions as soon as the liquid level reaches the suction inlet. The SFL serie offers a flange with pressure gauge connection port. The flange can be rotated for either horizontal or vertical pipe connections. Volumetric delivery: up to 2500 l/min Delivery head: up to 46 m Please contact us for delivery quantity

Immersion pumps series TH and FH use closed impellers in order to minimize power consumption and to optimize hydraulic pump efficiencies.In addition, the TH series offers high pressures at short immersion depths. Inline pumps of the series FH can be used as boostingpumps if provided with positive inlet pressure. This inlet pressure can be provided by the central coolant supply or a feed pump. In such a setup, pumps of the series FH can raise the incoming pressure by up to 26 bar. Extended length is possible. See mechanical/hydraulic features within the technical information section. Volumetric delivery: up to 640 l/min Delivery head: up to 520 m Please contact us for delivery quantity

Immersion Pumps are plain centrifugal pumps with the impeller fitted on the driving shaft extension. They are mounted on top of the container, the pump extension being immersed in the coolant. The maximum coolant level must stay a few mm/inches below the mounting flange. The STA serie offers a (SAE) flange with pressure gauge connection port. The flange can be rotated for either horizontal or vertical pipe connections. Volumetric delivery: up to 5000 l/min Delivery head: up to 120 m Please contact us for delivery quantity

Pressure Boosting Pumps series TH and FH use closed impellers in order to minimize power consumption and to optimize hydraulic pump efficiencies. In addition, the TH series offers high pressures at short immersion depths. Inline pumps of the series FH can be used as boosting pumps if provided with positive inlet pressure. This inlet pressure can be provided by the central coolant supply or a feed pump. In such a setup, pumps of the series FH can raise the incoming pressure by up to 26 bar. A frequency converter can be supplied for special applications or for matching the pump characteristic to a specific duty point. See page "Control/Regulation" in the Technical Information Volumetric delivery: up to 640 l/min Delivery head: up to 520 m Horizontal cutter pumps

Quick Suctioning Immersion Pumpsseries TGL/SGL equipped with the patented "BRINKMANN`s Suction De-aeration System" are excellently suited to pumping extremely inflated fluids (grinding oils) as they occur in high-speed grinding. The quick suctioning immersion pumps reach stable working conditions as soon as the liquid level reaches the suction inlet. The SGL serie offers a flange with pressure gauge connection port. The flange can be rotated for either horizontal or vertical pipe connections. Volumetric delivery: up to 2600 l/min Delivery head: up to 88 m Please contact us for delivery quantity

Type: Coolant Master 500 Manufacturer: GEA Westfalia Separator Description: Solid wall disc centrifuge Equipment: Frame, Bowl, Motor, Hood, Valves, Foundation frame, Tools, Controls, Manual and spare parts list

Type: Coolant Master 1000 Manufacturer: GEA Westfalia Separator Description: Solid wall disc centrifuge Equipment: Frame, Bowl, Motor, Hood, Valves, Foundation frame, Tools, Controls, Manual and spare parts list

The vertical lathes of the TVU product line of Berthiez are especially suited for machining engine and turbine components, which are primarily used in the aerospace industry as well as for alternative and classical power generation. The TVU vertical lathes are characterized by a complete cast design, highprecision static and dynamic positioning as well as longlasting reliability. Advantages of the TVU vertical turning lathes are, completely cast iron construction, high static and dynamic axis stability, high accuracies and long term reliability. For higher flexibility the machine can be equipped with several pallet change systems and adaptable milling heads. The optional Yaxis table traverse will permit the turning, milling and grinding of complex components in a single clamping

The vertical lathes of the TVU product line of Berthiez are especially suited for machining engine and turbine components, which are primarily used in the aerospace industry as well as for alternative and classical power generation. The TVU vertical lathes are characterized by a complete cast design, highprecision static and dynamic positioning as well as longlasting reliability. Advantages of the TVU vertical turning lathes are, completely cast iron construction, high static and dynamic axis stability, high accuracies and long term reliability. For higher flexibility the machine can be equipped with several pallet change systems and adaptable milling heads. The optional Yaxis table traverse will permit the turning, milling and grinding of complex components in a single clamping.

— Whitworth pipe thread DIN ISO 228 — Chambered O-ring — Seals FPM — Material with media contact: Brass, dezincification resistant — Material without media contact: Brass — Temperature range: -4 to 248 °F (-20 to +120 °C) — Working pressure range: -14 to 218 psi (-0.95 to 15 bar) — Not designed for steady motion of the tube

- Seals FPM - Material with media contact: Brass, dezincification resistant - Material without media contact: Brass - Temperature range: -4 to 248 °F (-20 to +120 °C) - Working pressure range: -14 to 232 psi (-0.95 to 16 bar)

- Whitworth pipe thread DIN ISO 228 - Chambered O-ring - Seals FPM - Material with media contact: Brass, dezincification resistant - Material without media contact: Brass - Temperature range: -4 to 248 °F (-20 to +120 °C) - Working pressure range: -14 to 348 psi (-0.95 to 24 bar)

— Whitworth pipe thread DIN ISO 228- Chambered O-ring — Seals FPM — Material with media contact: Brass, dezincification resistant — Material without media contact: Brass — Temperature range: -4 to 248 °F (-20 to +120 °C) — Working pressure range: -14 to 218 psi (-0.95 to 15 bar) — Not designed for steady motion of the tube

— Whitworth pipe thread DIN ISO 228- chambered O-ring — Seals FPM — Material AISI 316L (1.4404) — Temperature range: -4 to 248 °F (-20 to +120 °C) — Working pressure range: -14 to 232 psi (-0.95 to 16 bar) — Not designed for steady motion of the tube

— Whitworth pipe thread DIN ISO 228 — chambered O-ring — Seals FPM — Material AISI 316L (1.4404) — Temperature range: -4 to 248 °F (-20 to +120 °C) — Working pressure range: -14 to 232 psi (-0.95 to 16 bar) — Not designed for steady motion of the tube

Mobile, mounted on a trolley on floor or in the pit. Yellow reinforced fibre glass collector with filtering and automatic backfilling of re-usable coolant incl. drip-off grid. Load Capacity: 80l

The 200 series hose features a reinforced chlorinated Polyethylene (CPE) synthetic rubber liner, wrapped in a double stainless steel external braid for additional resistance to abrasion. Ideal for use outside the cockpit, engine bay and underneath vehicles where abrasive protection is required.

Mobile, integrated 60 l tank, 5 l concentrate reservoir, stepless adjustable pressure, metering device for cleaning agent, water shortage control, overheat fuse. Volume 1,8 l/m. 10 KW, 16A. 5 m hose with large pistol, hand screw coupling and lance SR-LA 600. Hose with quick change couplings at the device.

Large amounts of bushy turnings can be added and processed directly (i.e. from cart dumpers). The shredder with vertical cutters(normal or fine) is especially suitable for crushing tough materials and is fitted with an automatic large part ejector.

The “big brother” of the TA series is set up for very big bushy turnings of hard and brittle material.

The patented one shaft crusher with automatic ejector of large parts. Especially suitable for use in machine pump back systems for chips and coolants. Compact and robust design with the Mayfran high quality features. Maximum security for the user, since no manual intervention is necessary. Large parts can no longer block the crusher and interrupt the operation.