Convector - Import export

QuickFit Protection Basket Our protection baskets are valuable accessories: they protect against collisions, give additional protection against dust and are an optical enhancement. Like the heaters themselves, they are manufactured in high-grade steel, so that we offer a logical solution regarding both quality of material and optical general impression. QuickFit: You fix our baskets without any further tools or drillholes! Just put the basket over the already mounted RiRo and wedge it, ready!

Schultze RiRo heaters are your solution for industrial and commercial heating appliances: dust- and watertight, corrosion-resistant, flexible and uncomplicated to install. Suitable for damp locations and rough industry environment, for reliable and efficient heating – often unnoticed, but indispensable. The construction of RiRo-nta is identical with RiRo-nt except for the fact that heating power can be steplessly regulated by our built-in thermostat. It keeps the temperature of your choice constant between +5°C and + 30°C or just protects your room from frost. The red signalling light shows when power is on.

Schultze RiRo heaters are your solution for industrial and commercial heating appliances: dust- and watertight, corrosion-resistant, flexible and uncomplicated to install. Suitable for damp locations and rough industry environment, for reliable and efficient heating – often unnoticed, but indispensable. With these heaters the excess temperature touching the top of the fins does not exceed 67K (difference of 67°C to room temperature).

Schultze RiRo heaters are your solution for industrial and commercial heating appliances: dust- and watertight, corrosion-resistant, flexible and uncomplicated to install. Suitable for damp locations and rough industry environment, for reliable and efficient heating – often unnoticed, but indispensable. The heater RiRo-fa is identical with type RiRo-f, but additionally heat transfer can be controlled steplessly by our built-in thermostat. According to your needs the heater will keep the room frostprotected or the temperature will be kept constant at your choice between + 5°C and + 30°C. Applicable for rooms with risk of fire. Max. 115°C on top of the fins.

Schultze RiRo heaters are your solution for industrial and commercial heating appliances: dust- and watertight, corrosion-resistant, flexible and uncomplicated to install. Suitable for damp locations and rough industry environment, for reliable and efficient heating – often unnoticed, but indispensable. RiRo-F for rooms with fire risk: the economic choice for rooms where a “full range” heating is not needed, e.g. to protect your rooms or your valuable facilities against frost. To keep below the reduced surface temperature of 115°C we chose appropriate power layout. Max. 115°C on top of the fins.

Schultze RiRo heaters are your solution for industrial and commercial heating appliances: dust- and watertight, corrosion-resistant, flexible and uncomplicated to install. Suitable for damp locations and rough industry environment, for reliable and efficient heating – often unnoticed, but indispensable. With the built-in three step switch heating power can be adjusted according to actual requirements. This helps saving energy! Step I 1/3 of heating power Step II 2/3 of heating power Step III 3/3 of heating power

Schultze RiRo heaters are your solution for industrial and commercial heating appliances: dust- and watertight, corrosion-resistant, flexible and uncomplicated to install. Suitable for damp locations and rough industry environment, for reliable and efficient heating – often unnoticed, but indispensable. Universal features: for power types 1000 W to 3000 W the connection can be fitted with either 230 V or 400 V 3(N) ~. On request: for special applications all types are available in special voltages or different high-grade steel qualities, e.g. for food- or off-shore-industry.

Schultze RiRo heaters are your solution for industrial and commercial heating appliances: dust- and watertight, corrosion-resistant, flexible and uncomplicated to install. Suitable for damp locations and rough industry environment, for reliable and efficient heating – often unnoticed, but indispensable. The heating power is steplessly adjustable and the thermostat keeps your chosen temperature constant. Choose either frost protection or your temperature between + 5°C and + 30°C. The red signalling light shows when power is on.

Features — Particularly beneficial in modern buildings with large windows — With natural convection for complete room heating, supplementary heating and/or cold air screening — Adaptation of length by trench extensions provided by empty trenches or by coupling standard lengths together — Convenient surface- or flush-mounted electrical controller Tailor-made Your customer gets the thing you appreciate about Kampmann: individual made-to-fit trenches for all façades. Regardless of whether you need mitred corners, curved trenches, column cutouts etc. Our trenches are also available for floor-mounting or semi-recessed. Uses — Hotels/motels — Sales rooms and showrooms — Office and meeting rooms — Residential areas and conservatories — Restaurants and cafés

Trench heating unit with EC tangential fan convection. All-purpose, individual, made-to-measure. The Katherm QK is whisper-quiet. It is also available in 120 versions. It comes in non-standard lengths, with curved trench, mitres, cut-outs for columns or angles. Its ultra-long EC fan covers the entire heating range, from full space heating to cold air screening. Benefits - made-to-measure trench lengths - high outputs at small trench depths, even when used with low temperatures - whisper-quiet EC technology Applications All areas of buildings in which effective heating and cold air screening is required. Effective, energy-saving heating can be provided by Katherm QK in conjunction with modern heating systems

Tangential fan convection with electric heating element. The Katherm QE is the ideal solution when a LPHW convector cannot be used. It stands out on account of its energy-saving and ultra-quiet EC tangential fans. The high-output electric heating element delivers high heat outputs. coupled with low sound levels. Benefits — heating without water — fast warm-up at low sound emissions — ideal alternative to convectors with LPHW Applicatioms All areas of buildings in which effective heating and cold air screening is required. Katherm QE units can provide energy-saving and low-noise heating particularly when the use of LPHW is not provided for or possible

Trench heating and cooling. EC tangential fan convection. Quiet and energy-efficient. The Katherm HK permits demand-led heating from the floor. It also features a cooling function. With its new incremental lengths, the Katherm HK is the right solution for the most diverse building requirements. The redesigned EC tangential fan runs silently and is extremely energy-efficient. Benefits - cost-effective efficient heating AND cooling at low noise levels - in line with the Hygiene Directive VDI 6022 - 2-pipe or 4-pipe system for individual comfort in every room Applications Buildings of all kinds, in which there is a high cooling load due to internal loads and the effects of sunlight. Experience has shown that Katherm HK can provide low-cost, effective cooling with low, non-disruptive sound levels.

Trench heating unit with EC tangential fan convection. Top performance from smallest dimensions. The Katherm QK nano provides high heat outputs from minimal dimensions. With a trench height of only 70 mm and a trench width of only 165 mm, it can be used wherever conventional trench solutions are impossible due to a lack of space. Due to the limited space in the unit, the interplay of the EC tangential fan and high-output copper-aluminium convector has been optimised in the Katherm QK nano. Benefits - extremely low overall height - maximal use of the floor space - usual quietness and high-performance Applications All areas of buildings in which effective heating and cold air screening is required. Effective, energy-saving heating can be provided by Katherm QK in conjunction with modern heating systems.

Product advantages — for applications with high external pressure — large-dimensioned heat exchanger for maximum possible output — slimline design for installation in suspended ceilings - easy to install XL Outputs This fan coil guarantees XL outputs – even with high air-side pressure loss requirements. The EC fans used can be continuously variably controlled by a 0-10 V DC signal. Well insulated The sheet-steel housing helps to reduce noise and is also insulated against thermal losses, thanks to its integral insulation. Slimline design The Venkon XL fan coil is ideal for installation in suspended ceilings on account of its slimline design. It can be flexible combined with a connection unit for circular ducts to route treated air to targeted ventilation terminal components. Models You have the choice of four models for each application and building of any kind that needs to be cooled and/or heated. Applications Hotels, Offices, Commercial buildings, Restaurants

High-performance connectors, signal connectors and several thousands of connector components – the range of industrial connectors in stock allows igus to provide a high level of availability with short delivery times. - Fast delivery - High level of availability - 100% tested and with warranty - Useful tools such as for crimping - Can also be harnessed with cables - Quantities from 1 to high volume production

Use: Connector for thermocouple and RTD circuits. The solid connector pins guarantee reliable connection under even the most difficult conditions. Jab-in cover allow easy connection without need cover removal. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Reverse polarity protection by different pin thicknesses. • Central cover attachment for fast installation. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection.

Use: Plug connector for thermocouple and RTD circuits. The solid connector pins guarantee reliable connection under even the most difficult conditions. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Solid connector pins and spring-loaded socket. • Reverse polarity protection by different pin thicknesses. • Central cover attachment for fast installation. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection.

Use: Connectors for thermocouples and resistance thermometers measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic • Contacts of original thermocouple material pins and spring-loaded inserts for reliable contact • Easy wire connection through sandwich construction • Reverse polarity protection by different contact pin widths • One-piece housing withstands great stresses • Moulded barriers prevent short circuit • Stainless steel screws with combination head (Slotted and Phillips) terminals enable quick connection

10 meter mains connection cable for the AC connection of the module inverter. With this 10 meter connection cable, the inverter can be connected to the house network. Just electricity. At one end of the cable with fitted Betteri mains connection socket - at the other end of the cable with Schuko plug. Simply DIY. Just plug in.

The semi-finished products manufactured by Embro GmbH are optionally available with an electrical connection. In addition to the many possibilities of placing different elements on carrier materials with special embroidery processes, Embro offers splicing or soldering techniques for perfect and cost-effective connections. The parts are crimped or soldered together as standard. The introduction of thermal switches, NTC or other cable solutions is also no problem. Special connector solutions can also be implemented. This means that the textile semi-finished products are plug & play ready upon delivery. #service #contacting #b2b

The TLS 100 tube sensor works on the capacitive measuring principle and detects the presence of a liquid in a plastic tube. These plastic tubes may also be mounted as a by-pass on a compensator in order to signal the required medium level in containers. The sensor is simply snapped onto the tube at the ideal level of the medium and provides versatile usage for a wide range of applications in medical equipment, the food stuffs industry etc. The sensor can additionally be fixed by means of the two mounting lugs to ensure a tight fit on the tube. Caution The switch point is factory pre-set so as to lie exactly between the two mounting clips. When readjusting the switch point, please observe that it again lies between the two clips. A mass surface in the proximity (< 10 mm) may influence the switch point and may necessitate a readjustment.

The capacitive level sensor BEDIA NR 150 is suitable for liquids with low relative dielectric constant εr 1,8 … 6 (ref. εr 2,1). It has a MIN/MAX selector switch and the functions for MIN or MAX monitoring as well as other properties (output signal LSS or HSS, response delay etc.) are factory pre-set. The switch point is adjustable by means of a teach-in momentary switch.

The capacitive level sensor NR 160 is designed to monitor liquids and powders with high relative dielectric constant εr 35 … 85. The functions for MIN or MAX monitoring as well as other properties (output signal LSS or HSS, response delay etc.) are factory pre-set. The switch point is adjustable by means of a teach-in momentary switch.

Connection cable with MC4-compatible plug and wire sleeve ready-made Plus and minus set – for wiring parallel circuits Simply plug into the connection cable of the junction box on the module, or into the distributor plug of your photovoltaic system, to the solar charge controller

RST20i3 connector, straight, 3 positions, plug, connection type screw connection, rated voltage 250 V, rated current 20 A, cable diameter 6 – 10 mm, coding color / contact insert black

We offer a wide range of high quality spring contacts or battery charging contacts. In our online catalog you will find over 300 standard spring contacts and connectors, which you can request directly from us with just a few clicks. https://katalog.nh-technology.de/ Completely custom designs or changes to specific specifications can also be made by us, including current rating, spring force, and plating. Our experienced team of engineers will help them design custom solutions that are perfectly tailored to your requirements. In doing so, we offer a variety of options, including different materials, surface coatings and connector configurations.

The NR 260 is a capacitive level sensor for monitoring liquids. It is designed for use in fuel cells. The material is also suited to applications in the chemical industry for monitoring aggressive media. The functions for MIN or MAX monitoring as well as other properties (output signal LSS or HSS, response delay etc.) are factory pre-set. The Main Features of the NR 260 are high medium resistance of materials enamel, Hastelloy C4 2.4610 and stainless steel 1.4571 high protection class IP67 with connector short-circuit proof switching output 1 A, high side or low side switch MAX sensor or MIN sensor switch point factory pre-set for the following media: de-ionised water (conductivity < 4,2 μS/cm): 28 mm ± 2 mm tap water (conductivity ≈ 300 μS/cm): 22 mm ± 2 mm other media upon request; switch point adjustment via programmable interface on request