Containers for collecting - Import export

In addition, you will find in our assortment: Fragrances of different scents as sticks for the collection container or as granules to suck up. Organic waste bags 10, 20 or 120 l Unfortunately, we do not carry paper carrier bags, shopping bags or wrapping paper.

Gmöhling data disposal containers are available in different sizes and versions and ensure that even sensitive data and files are securely and optimally collected and disposed of in accordance with the German Federal Data Protection Act (BSDG). Material subject to data protection can be collected in our data disposal containers, also referred to as file containers, and then transported for destruction as required by law. The containers can be fitted with various locking systems as required and naturally prevent unauthorised third party access to data. We can manufacture bespoke versions according to your precise needs upon request. Just ask! Collection container in aluminium Walls reinforced with trapezoidal ribbing Castor arrangement B - 2 fixed and 2 swivel castors 125 mm, non-marking solid rubber wheels in steel castor forks, with roller bearings and thread protection - 2 swivelling castors with brakes in accordance with European standard DIN EN 1757-3 Hinged lid with...

Multi sampler with several closed chambers, for multi point sampling from several predetermined sampling depths. Bürkle zone samplers are used for taking samples of bulk goods of any kind. The big advantage of zone samplers is that all-layer samples can be collected from all layers of the container. Various bulk goods can be collected with the lances, from the finest powder to large grains such as corn or nuts. The zone samplers are available in different lengths. 55 cm (only Multi, Uno and All-layer sampler) especially suitable for sacks, 85 cm long (especially for barrels, tubs, mixed containers) and 150 cm as well as 250 cm (only Jumbo sampler) for big bags, silos, tanks. Safe and reliable sampling is made even easier with useful special accessories such as sealing sleeves, Quali-Paper, cleaning brushes, emptying devices and close-it control seals. The zone samplers are available in different models for different sampling tasks.

Uno sampler made of stainless steel AISI 316L (1.4404)/PTFE with a closed sample chamber for point sampling from a predetermined sampling depth. Bürkle zone samplers are used for taking samples of bulk goods of any kind. The big advantage of zone samplers is that all-layer samples can be collected from all layers of the container. Various bulk goods can be collected with the lances, from the finest powder to large grains such as corn or nuts. The zone samplers are available in different lengths. 55 cm (only Multi, Uno and All-layer sampler) especially suitable for sacks, 85 cm long (especially for barrels, tubs, mixed containers) and 150 cm as well as 250 cm (only Jumbo sampler) for big bags, silos, tanks. Safe and reliable sampling is made even easier with useful special accessories such as sealing sleeves, Quali-Paper, cleaning brushes, emptying devices and close-it control seals. The zone samplers are available in different models for different sampling tasks.

The combi setting tool Flipper® Plus is a combi setting tool for blind rivets and blind rivet nuts. A tool-free conversion from blind rivet to blind rivet nut setting tool is possible in under one minute in just a few simple steps. The ergonomically designed hand tool has a new ratchet function. The force increases when the handle is closed. This finding is put to good use in a special lever arrangement for setting blind rivets and blind rivet nuts. The required manual force is reduced by around 40 percent if actuated several times. Due to an actuation lever with an opening spring the tool can be used easily for a single-handed operation. The jaw mechanism with spring reset arranges a safe and automatic mandrel ejection. The rivet mandrel collection container can be clipped to the body casing and is easy to empty. The larger device lift is a benefit when handling extra long blind rivets. The Flipper® Plus offers a simplified setting procedure for blind rivet nuts.

Processes all blind rivets up to 5 mm aluminium and 4 mm steel and stainless steel. Sets blind rivet nuts from M4 to M6 aluminium and from M4 to M5 steel. Weight: 750 g Total length: 217 mm Total stroke: 16.2 mm Single stroke: 1.8 mm The combination tool for setting blind rivets and blind rivet nuts. The change from blind rivet to blind rivet nut setting tool is almost tool-free. The kit is supplied in a practical and robust plastic case. The ratchet function of the Flipper Plus makes working easier. The required hand force is reduced by approx. 40 percent when actuated several times and the actuating lever with opening spring ensures optimum operation with one hand. Advantages: — Gripping mechanism with spring return ensures safe and independent mandrel ejection — mandrel collecting container on pliers housing is attachable and easy to empty — Large tool stroke for easier setting

Blind rivets up to 5 mm Ø aluminium and 4 mm Ø steel and stainless steel Technical data Weight: 750 g Total length: 212 mm Total stroke: 16,2 mm Single action stroke: 1,8 mm Nosepieces/accessories Nosepieces:10/18, 10/24 and 10/29 1 maintenance wrench (on magazine) Operating instructions with spare parts list Advantages • The force increases when the handle is closed. This is made use of via the special arrangement of the lever when setting blind rivets: ergonomic design • The required manual force is reduced by around 40 percent if actuated several times. • Actuation lever with an opening spring for easy single-handed operation • Jaw mechanism with spring reset for safe and automatic mandrel ejection • Rivet mandrel collection container can be clipped to the body casing and is easy to empty • Larger device lift: a benefit when handling extra long blind rivets • Link pin on anti-twist bearings • Ergonomic lever positions and handle design

Professional sweeper Ferrum DM yard loader / wheel loader suitable for many of our wheel loader models with water tank and electric water pump When ordering the new wheel loader, please ask us about the electrical installation With edge broom for curb edges, for example, installation on the left and right side possible width 200cm with collection container required 3rd control circuit for opening and closing dirt collection container required 4th control circuit for rotation drive of the brush and edge broom Recommended for: Wheel loader Ferrum DM308 x4 V2 Ferrum DM312 x4 Ferrum DM416 x4 V2 Ferrum DM522 x4 Ferrum DM430 x4 DLZ Ferrum DM625 x4 Ferrum DM732 x4 Court loader: Courtyard loader FIRST 12 Courtyard loader FIRST 16

Sweeper Ferrum DM yard loader / wheel loader suitable for many wheel loader models see listing width 200cm with collecting container requires 3rd control circuit for rotary drive brush For a small additional charge we can also supply suitable for any other holder . All we need are the exact dimensions and a drawing. Please contact us if necessary. Recommended for: Wheel loader Ferrum DM308 x4 V2 Ferrum DM312 x4 Ferrum DM416 x4 V2 Ferrum DM522 x4 Ferrum DM430 x4 DLZ Ferrum DM625 x4 Ferrum DM732 x4 Court loader: Courtyard loader FIRST 12 Courtyard loader FIRST 16

“We all need to use the natural resource wood responsibly, to protect our forests and the climate by extension!” INDIVIDUAL AND CUSTOMIZED: OLD WOOD COLLECTION AND RECYCLING We assist in disposing of your old wood waste (Categories I – IV) – from single-use pallets to fencing. We offer tailored services: collection/disposal through the Reiling fleet or provision of collection containers; pickup can be flexible or on-demand. For commercial quantities, our 24-hour acceptance is open daily. Using innovative techniques and rigorous controls, we process old wood for various purposes. Our end product is wood chips used in the chipboard industry or to generate carbon-neutral energy in power plants. Contact us for more information or quotes! Your contact person: Anna-Katharina Hinz | Sales Manager Wood Tel.: +49 2383 936031 E-Mail: a.hinz@reiling.de

Glass can be recycled indefinitely without any loss of quality. GLASS RECYCLING | RESPONSIBLE RESOURCE MANAGEMENT With over 1 million tons of processed flat and container glass annually, we are one of Europe's leading recycling companies. With 100 years of experience and over 650 employees, we operate at 12 locations both domestically and internationally, ensuring that high-quality processed shards can be reused as secondary raw materials in various glass industries and melting applications. We assist with the disposal of your container glass. As partners of dual systems, municipalities, industry, and commerce, we are where you need us! In addition to container placement, we ensure regular collection or Just-in-Time pickups – and naturally, we guarantee seamless documentation of the recycled glass quantities. Our staff is available to advise you, even on-site, regarding individual glass collection options. Contact us for more information and quotes!

These are ideally suited for extraction from one or more sources of dust and are predominantly used in small and medium-sized enterprises for air quantities of up to 6,000 m³/h. ES 200P/280P deduster with jet cleaning The ES 200P deduster is designed for an air quantity of max. 3,000 m³/h and has one dust collection container; the ES 280P is designed for max. 6,000 m³/h and has two dust collection containers. The ES deduster is made of galvanised sheet steel and is a universal device for the extraction and separation of various types of swarf and dust. The raw air inlet nozzle has a non-return valve arranged upstream of the device. The filter works according to the downdraft principle, i.e. raw air is fed to the filter cartridges from above. This construction results in extremely efficient pre-filtration and preserves the filter medium. The filter cartridges are cleaned by means of compressed air impulse. Swarf and dust is collected in the mobile containers arranged underneath. The fan, which is arranged on the clean air side, is equipped with a high-performance impeller. The clean air outlet opening has a sound-absorbing lining. The electrical controller is directly attached. Equipment Optional: 280P / PAS deduster MS multi-extractor with double-walled filter sack The built-in radial fan sucks off dust and swarf at the place of generation and forces it via the impeller into the air injection frame. The swarf collects in the dust or swarf sack. The dust/air mixture flows into the filter sack, where the dust is filtered out. The cleaned air is fed directly back to the operating area. The double-walled filter sack offers a significantly larger filter area compared to other designs. Filter cartridges are also possible here as an option. The filter elements are cleaned manually. The multi-extractors are predominantly used with coarse-grained and unproblematic types of dust and swarf. The devices are not suitable for continuous operation or for wood dust and splinters. Three sizes are available for the following maximum air quantities: Type MS 160 up to 2,000 m³/h Type MS 200 up to 3,000 m³/h Type MS 250 up to 5,000 m³/h

Compact filters are characterised by the fact that they essentially unite fan, filter element and discharge or dust collection facility in one. The capacity range of the compact filters extends up to 20,000 m³/h. Different systems and modes of operation are available for the individual assemblies, resulting in a large number of possible variants. This allows us to offer a large range of solutions for dedusting tasks. Based on our many years of experience, we select the filter media from those available on the market that are best suited for the most diverse types of dust and tasks. Filter hoses, filter bags, filter tubes and filter cartridges are used as filter elements. Cleaning takes place using compressed air impulse, low-pressure purge-air or shaking. Fans from own development and production enable us to design a highly efficient and precise layout. Discharge usually takes place directly into collecting containers, such as dustbins with snap fasteners, or into containers, big bags, or via discharge mechanisms into automatic disposal systems. Screw conveyors, drag conveyors, rotary systems, cellular wheel sluices, double-gate sluices and slidegate valves are available as discharge mechanisms. Intelligent control systems, piping elements, silencers and pre-coating devices for auxiliary dusts are standard items in the range. Naturally we also use our know-how to create needs-based custom solutions.

Separation of paint powder from powder coating booths. Options: Rippert powder filter This type of filter is particularly suitable for the separation of paint powder from powder coating booths and is also often used together with an upstream Rippert cyclone for powder recovery. Separation chamber with dust collecting container, filter cartridges, compressed air cleaning and sound-insulated fan are housed in a compact design. The filter cartridges are arranged vertically in order to ensure optimum cleaning behaviour and energy-efficient operation. The fan, which also comes from our own production, is characterised by smooth running and high efficiency. Standard advantages:

Plastic-coated steel cablestrands are cut to length using a special shear cut module and then stripped with the cutting module of the AM3500 without the wires "jumping open".Bare steel cable wires are transported by the modified AM 3500 directly to the special cutting machine, which is coupled between the AM 3500 and the material stacker and which cuts the material to length by a thermal process. Due to the special electric welding process used here, the individual wires do not twist up during cutting, and a smooth rope start and a smooth rope end without thickening are produced. Long steel cable wires/strands are placed in a tray after processing, while short pieces of material fall down a chute into a collecting container. With the high-performance solution developed by Metzner, the customer can process different types of material in different processes. Further advantages of the machinery are high precision, high quality, an increase in productivity and lower personnel costs.

An internationally active medical technology company that produces and sells catheter tubes, among other things, has optimized its manufacturing process with the help of a production line from Metzner Maschinenbau. With Metzner's know-how, it was possible to replace a costly manual process with an automatic machine, saving costs. At the same time, the length accuracy and the cutting quality were significantly improved. The company supplied a fully automatic system that precisely cuts the catheter tubing to length, removes the mandrel present from the extrusion without leaving any residue and without longitudinal expansion, and then deposits the tubing in a collecting container at the end. Processing with exact length accuracy and mandrel removal The Metzner special development cuts catheter tubes to an exact length and removes the mandrel inside safely and precisely. The finished material is deposited in a collection container.

The special Metzner development is a fully automatic machinery consisting of a contact-free loop control, an automatic cutting machine and a crushing station with storage system. It can produce polystyrene pipettes with diameters from 4 to 25 mm and lengths from 100 to 700 mm. The extruded material is first scored with the aid of several rotary cutting heads, then broken and finally deposited in collecting containers. The cycle time for four parts is only 1.5 seconds. For the production of short lengths (up to 120 mm), the cycle time is extended to approximately three seconds.

Application The NTS is designed for testing and servicing fuel injectors of large diesel engines. Use NTS for examining the spray pattern, for leak testing of the needle seating and for. Features The infinitely adjustable testing pressure is is generated by means of an air powered double acting high pressure pump. The attachment for clamping the fuel injector is of rigid design and swivel-mounted so that the injector can be turned to horizontal position for ease of servicing. The transparent container for collecting the testing liquid is provided with an outlet for removing the liquid by suction.

-perforated intermediate floor 100 mm above the floor, perforation Ø 3 mm, separation 6 mm -1” drain-cock for drainage of liquids -can be emptied at any height by cable operated from the driver’s seat -body wall with reinforced edging -sturdy frame with fork sleeves -can be secured to prevent slipping and unintentional emptying -welding, oil- and watertight -spray painted or hot-dip galvanized -Volume (approx.) in m³: 0,3 / 0,5 / 0,75 / 1,0 / 1,5 -Load capacity in kg: 750 - 1500

Fränkische Industrial Pipes GmbH & Co. KG considers itself an international partner with the automotive industry, the home appliance industry and the machinery industry in developing technically complex corrugated tubes, corrugated tube systems, protective hoses and fluid transport conduit systems. Our custom blow molded parts for air ducts, clean air, recycled air are 3D blow molded and suction blow molded. They are 100 percent leak-proof and guarantee consistent wall thickness. They provide high stiffness combined with high mechanical strength and have been designed to match the different nominal sizes and inside diameters of our corrugated tubes with cuffs. Our corrugated tubes with integrated containers have been designed to reliably collect and store liquids without running the risk of leakage. The product can be custom-tailored in different nominal sizes, types of containers (with and without lid) and cuff sections to meet customers specifications.

Original Second-Hand Clothing and Shoes from Container Street Collections