Container protection - Import export

The fluoropolymer coating for special tank systems and containers. Modern tank and environmental technology requires safety and cost effectiveness. Gutbrod stands for innovative ideas and a dedication to service in coating with fluoropolymers and other technical, high-performance materials. Using products with the name, a chemical and acid resistant inner coating that is sustainable and cost-effective can be applied to special tank systems and containers through an access port. The material for this Fluorpolymer-coating, which will be applied with a specific method, is highly resistant against chemicals and acids, and has extraordinarily advantages, compared with common coating and lining systems.

Ex Room Heater for frost protection - Containers for dangerous goods - Instrumentation rooms

OHLER offers a wide range of aluminum foil trays. All materials have been developed to be filled both manually and automatically. They are available in various sizes and thicknesses, and the trays can even be lacquered or printed. Our range of aluminum containers is complemented by a variety of accessories including aluminum lids, closing and sealing foils, coated carton lids, plastic snap-on lids, insulated transport boxes and closing machines. Our aluminum trays can be used both in microwave and conventional ovens or with barbeque grills. Aluminum food containers protect food from deterioration. The lightest “complete barrier” available, aluminum is impervious to light, gas, water vapor, oils, fats, oxygen and microorganisms. They keep foods fresh, safe and tasty, maintaining quality throughout a long shelf life.

LIPP® Gas Accumulators were developed as a system for the nonpressurised storage of dry gas which has been used for over 300 projects worldwide over the past years or more. Sizes from 30 to 5000 m³ are available according to the gas yield in each case. The gas accumulator consists of two parts a bubbleshaped storage balloon and a steel container to protect the balloon against mechanical damage and the effects of weathering. Speciality Accurate level measure of stored gas. In biological processes, gas production is not continuous. That is why the utilisation of gas (e.g. in a combined heat and power plant) requires an accumulator in order to compensate for fluctuations during gas production and to bridge downtimes for plant repairs and maintenance. Besides high functional and operating safety, other important criteria for the construction and operation of gas tanks include the economic aspects of investment and maintenance costs.

ORBIS reusable bulk containers are designed to protect and transport heavy parts in automotive and industrial applications. Engineered for rugged applications, the plastic bulk containers are extremely robust and offer comprehensive product protection over a long service life. The 1200 x 1000 plastic bulk containers are available in multiple heights for increased packing density. The collapsible design with a return ratio of up to 1 : 3 reduces the shipping of air during return transport to a minimum. Key features: - manufactured from recycled material - multiple heights, access door and bottom configurations - durable all-plastic design - improved workplace safety - easy, on-site repair and part replacement - 100% recyclable

The new generation FLUX VISCOPOWER progressive cavity pumps for industry and hygienic (pharma, food, cosmetic) applications are suitable for pumping thin to high-viscosity fluids. The displacement pumps work with low turbulence at a constant pressure and provide for a gentle and pulsation-free operation. The VISCOPOWER progressive cavity pumps can be designed for industrial applications as well as for the pharmaceutical, food and cosmetic (Hygienic) sectors. All progressive cavity pumps VISCOPOWER are mobile and stationary, consist of only a few components and are easy and quick to dismantle. There is a choice of versions for immersing in the material and for installing outside the container; versions with explosion protection, 3A certification and FLUX FOOD pumps (Directive (EC) 1935/2004 and FDA CFR 21 compliant). For connection of the motor there is a choice between bearing flange and gear.

Plastic for welding … Welding is often the simplest and best way of fastening. The range of different perforated plates offers a wide range of applications. Size and quantity of the welding joints depend on the substructure and must be defined on site. Please note that the perforated metal sheet can under no circumstances take over any static functions. The secutex buffer pad is simply disconnected by grinding away the welding spots. These are the advantages Simply weld onto the item to be welded No need for repeatable holes in the workpiece No holes in the secutex impact protection material Applications On all metal surfaces On thin metal walls Everywhere where screwing is not possible or screw holes are unwanted Examples Collecting basins Ramp protection metal boxes Container Forklift Gripper Girder protection Pallet truck 1. Perforated metal sheet, overhang at the side This version is suitable for welding onto flat surfaces and extrawide profiles of construction steel.

Leak detector high detection sensitivity for pressurised piping and containers, e.g. on compressors, steel bottles, fittings, shut-off valves, breathing devices, oxyacetylene gas and inert-gas arc welding devices, Bunsen burners, valves, screw fittings of compressed-air lines etc. Suitable for compressed air, refrigerant, acetylene, butane, natural gas, carbon dioxide, gaseous oxygen, propane, town gas, nitrogen, hydrogen and, ammonia Suitable for checking the safety of systems with combustible gases and for avoiding financial losses through unrecognized leaks Advantages and benefits Frost-proof to -15°C Saves energy and warns of gas loss Contains corrosion protection inhibitors Tested by the DVGW in accordance with DIN EN 14291 Non-combustible Economical in use

Lubrication of highly stressed sliding surfaces, especially at low slip speeds or with oscillating movements, for example with screwed, mating or bayonet connections made of high-alloy steel or non-ferrous metals Surface separation of temperature-stressed threaded connections, for example at combustion engines and turbines Corrosion protection at screws, pins, bolts, flanges, spindles and fits For stainless-steel connections Advantages and benefits Economic product solution for users who previously used a wide variety of pastes Resistant to hot and cold water and also to most acids and lyes Excellent corrosion protection Contains Moₓ-Active for increased performance Metal-free Also available as spray version OKS 2501

Description Castrol Radicool SF is a silicate-free long-life coolant concentrate (OAT technology). Castrol Radicool SF offers excellent corrosion protection. It can be used in gasoline and diesel engines (also aluminum and gray cast iron) . Castrol Radicool SF has the optimal effect in a mixing ratio of 1:1 with water. This results in frost protection down to -37°C and the best corrosion protection. Do not use Castrol Radicool SF undiluted Application Frost protection/ Proportion of Castrol Radicool SF dissolved in water: -20°C/ 35% -25°C/ 40% -30°C/ 45% -37°C/ 50% Advantages The special OAT Technology ensures long coolant change intervals. Castrol Radicool SF protects against corrosion, deposits in the cooling system and overheating. Castrol Radicool SF offers: -Protection against hard water -Effective cooling effect -Excellent corrosion protection -Very good elastomer compatibility -Protection against cavitation -Contains Bitrex - to protect against ingestion

Description Castrol Radicool SF is a silicate-free long-life coolant concentrate (OAT technology). Castrol Radicool SF offers excellent corrosion protection. It can be used in gasoline and diesel engines (also aluminum and gray cast iron) . Castrol Radicool SF has the optimal effect in a mixing ratio of 1:1 with water. This results in frost protection down to -37°C and the best corrosion protection. Do not use Castrol Radicool SF undiluted Application Frost protection/ Proportion of Castrol Radicool SF dissolved in water: -20°C/ 35% -25°C/ 40% -30°C/ 45% -37°C/ 50% Advantages The special OAT Technology ensures long coolant change intervals. Castrol Radicool SF protects against corrosion, deposits in the cooling system and overheating. Castrol Radicool SF offers: -Protection against hard water -Effective cooling effect -Excellent corrosion protection -Very good elastomer compatibility -Protection against cavitation -Contains Bitrex - to protect against ingestion

Description Castrol Radicool SF is a silicate-free long-life coolant concentrate (OAT technology). Castrol Radicool SF offers excellent corrosion protection. It can be used in gasoline and diesel engines (also aluminum and gray cast iron) . Castrol Radicool SF has the optimal effect in a mixing ratio of 1:1 with water. This results in frost protection down to -37°C and the best corrosion protection. Do not use Castrol Radicool SF undiluted Application Frost protection/ Proportion of Castrol Radicool SF dissolved in water: -20°C/ 35% -25°C/ 40% -30°C/ 45% -37°C/ 50% Advantages The special OAT Technology ensures long coolant change intervals. Castrol Radicool SF protects against corrosion, deposits in the cooling system and overheating. Castrol Radicool SF offers: -Protection against hard water -Effective cooling effect -Excellent corrosion protection -Very good elastomer compatibility -Protection against cavitation -Contains Bitrex - to protect against ingestion

EP/AW hydraulic oils (HVLP) based on mineral oil with a high viscosity index Description The oils in the Castrol Hyspin AWH-M series are hydraulic oils with a high viscosity index (VI) and are characterized by a significantly lower temperature dependence of the viscosity compared to other hydraulic oils . They are based on solvent raffinates and contain shear-stable VI improvers, oxidation and corrosion inhibitors, as well as zinc-containing wear protection additives. Application Due to the good viscosity-temperature behavior, the Castrol Hyspin AWH-M series is used particularly in outdoor hydraulic units that are exposed to greatly fluctuating operating temperatures. The hydraulic oils of the Castrol Hyspin AWH-M series are classified as follows: DIN 51502 - Hydraulic oils - HVLP ISO 6743/4 - Hydraulic oils type HV The hydraulic oils of the Hyspin AWH-M series comply with the following requirement standards and specifications (depending on the viscosity):

EP/AW hydraulic oils (HVLP) based on mineral oil with a high viscosity index Description The oils in the Castrol Hyspin AWH-M series are hydraulic oils with a high viscosity index (VI) and are characterized by a significantly lower temperature dependence of the viscosity compared to other hydraulic oils . They are based on solvent raffinates and contain shear-stable VI improvers, oxidation and corrosion inhibitors, as well as zinc-containing wear protection additives. Application Due to the good viscosity-temperature behavior, the Castrol Hyspin AWH-M series is used particularly in outdoor hydraulic units that are exposed to greatly fluctuating operating temperatures. The hydraulic oils of the Castrol Hyspin AWH-M series are classified as follows: DIN 51502 - Hydraulic oils - HVLP ISO 6743/4 - Hydraulic oils type HV

Grease lubrication of unsheltered parts subject to heavy loading and/or impacts, such as friction, rolling and pivoting bearings, splined shafts, knockout spindles, threaded spindles and sliding surfaces of all kinds For harsh operating conditions Advantages and benefits Excellently suited as a safety lubricating grease in mixed friction sector with especially good wear protection Effectively protects against corrosion Contains Mox-active to improve performance For best results clean the lubricating point carefully. Clean with solvents like OKS 2610/OKS 2611 Universal Cleaner. Remove the corrosion protection ahead of the initial filling. Fill the bearings in a way that all the functional surfaces for sure get the grease. Slow moving bearings(DN-value < 50,000) should be filled completely, normal moving bearings should be filled to 1/3 of the free inner housing space. Observe the instructions of the bearing or machine manufacturer. Relubrication with a grease gun on to the grease

Lubrication of highly stressed sliding surfaces, especially at low slip speeds or with oscillating movements, for example with screwed, mating or bayonet connections made of high-alloy steel or non-ferrous metals Surface separation of temperature-stressed threaded connections, for example at combustion engines and turbines Corrosion protection at screws, pins, bolts, flanges, spindles and fits For stainless-steel connections Advantages and benefits Economic product solution for users who previously used a wide variety of pastes Resistant to hot and cold water and also to most acids and lyes Excellent corrosion protection Contains Moₓ-Active for increased performance Metal-free Also available as spray version OKS 2501 NSF H2 registered To achieve optimal adhesion remove soiling as well as other lubricants from the thread and sliding surfaces. Use a brush, spatula or similar to apply sufficient OKS 250

Lipp developed a system for the non pressurised (up to max. 5 mbar) storage of dry gas which has been used for over 300 projects worldwide over the past 30 years or more. Sizes from 30 to 5000 m³ are available according to the gas yield in each case. The gas accumulator consists of two parts a bubble shaped storage balloon a steel container to protect the balloon against mechanical damage and the effects of weathering The container is produced using the tried and tested LIPP Double Seam System. The storage balloon is made of polyester fabric specially laminated with PVC on both sides for improved gas resistance and UV protection. It is suspended in the container by means of a support ring. The gas pressure is increased as required between the gas accumulator and the point of utilisation by means of compressors. This results in lower investment and maintenance costs on the one hand and an extremely reliable and virtually wear free system on the other. Consequently

Pocket with wire hanger – flexible wire makes it easy to attach to transport containers. With protective flap to prevent documents from getting dusty or damp. • Document sleeve with galvanised, flexible wire for easy and secure fixation • For use on transport containers, meshed containers, wooden support frames and palette cartons • Coloured rear foil and transparent front foil made of heavy-duty polypropylene • Protective flap protects inserts against dust and moisture • Suitable for scanners and indelible • Inserts can be exchanged quickly • Internal dimensions: A4 portrait / 210 x 297 mm (W x H) • External dimensions with wire strap: 329 x 376 mm (W x H) • Suitable printable insert labels: Article number 485602

Pocket with wire hanger – flexible wire makes it easy to attach to transport containers. With protective flap to prevent documents from getting dusty or damp. • Document sleeve with galvanised, flexible wire for easy and secure fixation • For use on transport containers, meshed containers, wooden support frames and palette cartons • Coloured rear foil and transparent front foil made of heavy-duty polypropylene • Protective flap protects inserts against dust and moisture • Suitable for scanners and indelible • Inserts can be exchanged quickly • Internal dimensions: A5 landscape / 210 x 148 mm (W x H) • External dimensions with wire strap: 329 x 226 mm (W x H) • Suitable printable insert labels: Article number 485502

One-piece induction liners reliably close containers of any make or type using an induction sealing device. The unique features of these liners are: leak-proof, product freshness, tamper-proof and economical. A special quality for induction sealing of glass containers is availbale. Advantages One-piece liners Peelable Special qualities for sealing plastic and glass containers Leak protection Tamper evidence Protection against external influences

Preformed aluminium seals protect the product as well as the environment. They are made of aluminium-plastic compounds that provide an ideal protection against leaks and 100% tamper-proof. They can also be used to seal containers with aggressive chemicals and agro-chemicals. Their recessed shape or cap shape makes them idel for manual processing as they can easily be manually placed on the containers. Advantages reliable protection, also for aggressive products easy manual handling, self-centring

The „Guidance document on the impact of water treatment processes on residues of active substances or their metabolites in water abstracted for the production of drinking water“ of the European Chemicals Agency (ECHA) and the European Food Safety Authority (EFSA) provides a framework for risk assessment with regard to the authorization of active substances contained in plant protection products (PPPs) and biocidal products and the approval of these products. The guidance enables the identification of actual health concerns that may arise from exposure to harmful compounds that may be formed during water treatment for drinking water production. The focus is on common water treatment methods within the European Union (EU). The UV irradiation, according to the guideline, chapter 4.2.4.6. can be realized by the BSM-03 in a reproducible way.

The BaCo 1800 is a fully automated foil application and sealing machine, suitable for plastic, tin or glass containers. mobile base frame feed conveyor with feed control synchronised star wheel stand with receptacles for the containers as form parts adjustable outer ring for guiding containers through the machine sequence foil magazine for stackable pre-cut Ballerstaedt seals pneumatically driven foil dispenser with a precise, maintenance free 180° reverse gear for removing the seals from the magazine, applying them to the sealing edge and fixing them with a pre-sealer sealing station for closing the containers with regulation of the sealing temperature, pressure and time for optimal setting of the seal parameters, conductive, optional also inductive exit conveyor for the containers central height adjustment of the magazine plate to adjust it to the respective container height all-over protective coating control panel with electrical supply unit

SEAMIAUTOMATIC SEALING DEVICE suitable for the sealing of all sorts of plastic and glass containers. 1. foil application device PolySeal Vario DIS (left hand side) electro-pneumatic stepless pressure regulation stepless manual height adjustment with height scale foil dispensing with 2 spot pre-sealing removable pre-sealing plates heat protection shield vacuum suction nozzle roller guide with running slide foil magazine for stackable pre-cut sealing lids VARIOTRONIC, control unit for the regulation of temperature, sealing time and pressure 2. sealing device PolySeal Vario PN (right hand side) electro-pneumatic stepless pressure regulation stepless manual height adjustment with height scale sealing head heating block, swingable, anodised aluminium hollowed out sealing die heat protection shield container holder VARIOTRONIC, control unit for the regulation of temperature, sealing time and pressure

Extra wide VCI PE flat films folded on a roll for wrapping and lining containers protect the packaged products from rust.

Suitable for protection and preservation for terraces, trail markers, fences and suspended privacy screens made of bamboo. The oil emulsion produces a water-repellent, weather and UV-resistant surface that provides great protection against graying. The oil contains an active ingredient which protects the coat against mold, algae and fungi.

EXCOR VALENO Trays and Containers are made of hard plastics based on polyethylene and polypropylene and manufactured using deep-drawing or injection moulding techniques. The durability of these containers makes them the ideal choice for multiple uses, or may with narrower walls be employed as single-use packaging. The work pieces or small loads to be transported fit snugly into the containers. No additional VCI diffusers are needed since the plastic is impregnated with VCI substances. These two combined properties markedly simplify every kind of automated transport and storage process. Provided the instructions for use are followed EXCOR VALENO Trays and Containers will offer corrosion protection for up to five years.

Our ABS Roofer Kit provides roofers with a set of basic fall protection equipment. The robust protective bag contains a comfortable-to-wear, adjustable safety harness, a professional tape sling and a guided-type fall arrester with an integrated energy absorber. Safety harness (EN 361:2002) Guided type fall arrester (EN 353-2:2002 &amp; EN 358:2000) Available in 4 different lengths (5 m, 10 m, 15 m and 23 m Rope can be adjusted as required using the integrated rope shortener Incl. professional, abrasion-resistant tape sling and robust protective bag Optional (extra charge): Steel-plated storage case

COMBER Pressofiltro® Series PF 50 - PF 2000 with Containment System Pressofiltro® agitated Nutsche filters or filter dryers with containment system provide protection of the operators against hazardous materials and equally provide product or process safety against possible contamination from external particles. Special properties for the customer’s benefit: Containment systems (glove boxes) are designed to allow contamination free sampling, product discharge, heel removal and product pack-off into suitable containers Containment systems are available as passive, active, single chamber, two chamber and multiple chamber designs, all in compliance with cGMP and FDA guidelines Active isolator units are equipped with air handling systems and HEPA inlet and exhaust filters for containment levels down to 10 ng/m³ TWA The isolator design permits sampling, product discharge, pack-off, heel removal and filter cloth disposal in a single unit Sample and small items transfer using optional...