Connector cables - Import export

High-performance connectors, signal connectors and several thousands of connector components – the range of industrial connectors in stock allows igus to provide a high level of availability with short delivery times. - Fast delivery - High level of availability - 100% tested and with warranty - Useful tools such as for crimping - Can also be harnessed with cables - Quantities from 1 to high volume production

AC connection cable with Shuko plug for connecting a micro-inverter to a Schuko socket.

MediorNet Modular allows the customers to configure the mainframe to their requirements. The frame can be filled with various Media and Link cards, as needed for the specific application. All modules and cards are hot swappable. Redundant power supplies guarantee maximum reliability. The optimized cooling concept of MediorNet results in a very low-noise system. The horizontal air ow within the device allows for effective cooling without the need for additional rack space below or above the MediorNet mainframe. MediorNet frames can be rack mounted in various positions, e.g. with all connectors on the front or on the rear side, or recessed to allow cabling from the front but without connectors or cables exceeding the rack’s dimensions. The IEC connectors can be located front or rear independent from the other cabling.

MediorNet Modular allows the customers to configure the mainframe to their requirements. The frame can be filled with various Media and Link cards, as needed for the specific application. All modules and cards are hot swappable. Redundant power supplies guarantee maximum reliability. The optimized cooling concept of MediorNet results in a very low-noise system. The horizontal airflow within the device allows for effective cooling without the need for additional rack space below or above the MediorNet mainframe. MediorNet frames can be rack mounted in various positions, e.g. with all connectors on the front or on the rear side, or recessed to allow cabling from the front but without connectors or cables exceeding the rack’s dimensions. The IEC connectors can be located front or rear independent from the other cabling.

The “casing” sector for the electro and electronics industry was developed as a result of demand from the lighting industry for transformer housing for NV lights. Here we can emphasise our housings for electronic mounting devices. Individual customer requirements can be realized cost-efficiently by using insert adapters. Other products for the electrical industry are connectors, strain relief and cable fastening.

We realize magnetic connectors including cable assembly for all sectors and industries. On request, we also take over the construction and development. Depending on the material and internal structure of the spring contact probe, currents up to 15A per pin are possible. The magnetic force can be customized using different magnets. Protection classes up to IPx7 are possible for demanding installation situations. Please contact us if you are interested in a magnetic connection solution. For an initial evaluation of your request, a first sketch, the desired specifications, as well as the planned annual volume and duration is sufficie

5 meter mains connection cable for the AC connection of the module inverter. With this 5 meter connection cable, the inverter can be connected to the house network. Just electricity. At one end of the cable with fitted Betteri mains connection socket - at the other end of the cable with Wieland plug. Simply DIY. Just plug in.

The semi-finished products manufactured by Embro GmbH are optionally available with an electrical connection. In addition to the many possibilities of placing different elements on carrier materials with special embroidery processes, Embro offers splicing or soldering techniques for perfect and cost-effective connections. The parts are crimped or soldered together as standard. The introduction of thermal switches, NTC or other cable solutions is also no problem. Special connector solutions can also be implemented. This means that the textile semi-finished products are plug & play ready upon delivery. #service #contacting #b2b

10 meter mains connection cable for the AC connection of the module inverter. With this 10 meter connection cable, the inverter can be connected to the house network. Just electricity. At one end of the cable with fitted Betteri mains connection socket - at the other end of the cable with Wieland plug. Simply DIY. Just plug in.

5 meter mains connection cable for the AC connection of the module inverter. With this 5 meter connection cable, the inverter can be connected to the house network. Just electricity. At one end of the cable with fitted Betteri mains connection socket - at the other end of the cable with Schuko plug. Simply DIY. Just plug in.

15 meter mains connection cable for the AC connection of the module inverter. The inverter can be connected to the house network with this 15 meter connection cable. Just electricity. At one end of the cable with fitted Betteri mains connection socket - at the other end of the cable with Schuko plug. Simply DIY. Just plug in.

10 meter mains connection cable for the AC connection of the module inverter. With this 10 meter connection cable, the inverter can be connected to the house network. Just electricity. At one end of the cable with fitted Betteri mains connection socket - at the other end of the cable with Schuko plug. Simply DIY. Just plug in.

AC connection cable 5m with Betteri plug and Wieland plug. 5 meter mains connection cable for the AC connection of the module inverter. With this 5 meter connection cable, the inverter can be connected to the house network. Just electricity. At one end of the cable with fitted Betteri mains connection socket - at the other end of the cable with Wieland plug. Simply DIY. Just plug in.

10 meter mains connection cable for the AC connection of the module inverter. With this 10 meter connection cable, the inverter can be connected to the house network. Just electricity. At one end of the cable with fitted Betteri mains connection socket - at the other end of the cable with Wieland plug. Simply DIY. Just plug in.

Connection cable with MC4-compatible plug and wire sleeve ready-made Plus and minus set – for wiring parallel circuits Simply plug into the connection cable of the junction box on the module, or into the distributor plug of your photovoltaic system, to the solar charge controller.

Connection cable with MC4-compatible plug and wire sleeve ready-made Plus and minus set – for wiring parallel circuits Simply plug into the connection cable of the junction box on the module, or into the distributor plug of your photovoltaic system, to the solar charge controller.

Connection cable with MC4-compatible plug and wire sleeve ready-made Plus and minus set – for wiring parallel circuits Simply plug into the connection cable of the junction box on the module, or into the distributor plug of your photovoltaic system, to the solar charge controller

High-performance compact actuator for absolute positioning tasks Easy mounting. Through hollow shafts up to max. ø14 mm possible. Integrated analog absolute position encoder. Electrical connection via cable or connector.

The CoMeT system is used to measure the screening effectiveness (transfer impedance, screening attenuation and coupling attenuation) of coaxial and symmetrical cables, connectors, bushings, distribution components, etc. The original CoMeT (Coupling Measuring Tube) has grown into a complete system. In principle, a cable measuring station consists of the following basic components: In addition to differently dimensioned round tube systems for cables and connectors, there are also so-called “triaxial cells” that provide a larger measuring chamber volume for parts that do not fit into one of the tubes due to their geometry (sockets, distributors, etc.).

High-performance compact actuator for simple positioning tasks Easy mounting. Through hollow shafts up to max. ø14 mm possible. Integrated magnetic position encoder on output shaft. Electrical connection via cable or connector.

Incremental Profile AG01 Incremental: Easy mounting Through hollow shafts up to max. ø14 mm possible Integrated magnetic position encoder on output shaft Electrical connection via cable or connector

Analog Profile AG01 Analog: Easy mounting Through hollow shafts up to max. ø14 mm possible Integrated analog absolute position encoder Electrical connection via cable or connector

Often, special requirements cannot be standardized. For this reason, we configure our sensors to your individual requirements. Modifications of the offset distance or measuring range, cable and connector variants and modifications to the housing and optical system are often required.

Cable assembly by bda connectivity is designed for high performance and long service life. Extremely low PIM guarantees network performance while the rigidness of cable structure ensure for installation in toughest environment and workmanship. Various cable types and connectors are available for customer project demands. Cable types are including RF coaxial cable, leaky cable, optical cable, etc, while connectors are including N, 7/16, 4.3-10, TNC, etc. Please contact your nearest sales representatives for more details cable assembly services.

Whenever pre-assembled cables need to be led into a housing, the cable entry system KADL is the perfect solution. KADL is installed with one click - easy and timesaving. The modular structure allows a step-by-step installation of 3 to 25 cables. With 16 different grommets a wide clamping range from 3 to 32,5 mm can be covered. - For applications where you need to insert and seal pre-assembled cables with connectors into housings - Tool-free entry and connecting technology for machines and equipment - Temperature range -30 °C to +100 °C - Protection grade IP65 - UL 514B - 12 different frame combinations with 16 sizes of grommets (accessory) - Click-in assembly at wall thickness from 1,5 - 2,0mm - For walls with thickness larger 2,0 mm the KADL can be fixed with standard screws

The Float Switches have the following Features: - G1/8" to G1", Flange (round and oval) - PVC- and Silicone-cable - M12-connector - Alu- and ABS-enclosure - max. 2 NO oder NC, max. 3 Change over - Overall length upto 2.000mm - Temperature range -40°C to +150°C - max. 3bar - IP67 - Options: integrated RTD on request

The Float Switches have the following Features: - G1/8" to G1", Flange (round and oval) - PVC- and Silicone-cable - M12-connector - Alu- and ABS-enclosure - max. 2 NO oder NC, max. 3 Change over - Overall length upto 2.000mm - Temperature range -40°C to +150°C - max. 3bar - IP67 - Options: integrated RTD on request

— AC and DC sensors available — High switching frequencies up to 4000 kHz — Fully encapsulated versions to protection class IP67 — Sturdy metal or plastic enclosures — Temperature range: -25°C up to +70°C — Sensing distances: 2 mm to 8 mm — Cable / connector versions — 10 – 36 V DC or 76-250 V AC — PNP / NPN versions — NO / NC versions — Function indicators — Short circuit-proof versions — Versions with IO-Link

— AC and DC version sensors — Sensing distance / sensitivity adjustable with side potentiometer — Sturdy metal or plastic enclosures — Metal versions with Teflon front cap — Temperature range: -25°C up to +70°C — Sensing distances: 2 mm up to 13,5 mm — Cable / connector versions — 10 – 36 V DC or 20 – 250 V AC — PNP / NPN or AC versions — NO / NC versions — Short circuit-proof PNP versions — M18 with function/operating voltage indicator