Concrete forms - Import export

As a market leader for circular building site saws and with more than 80 years of experience, we know what is important. With this knowledge, we work continually to keep products up to date, thereby offering the highest-quality, most durable and safest machines.Changes in the machinery directive For improved safety, we have developed a safety hood that has proven to significantly reduce occupational accidents as part of the revision of standard EN 1870-19 prior to the amendment of the Machinery Directive 2006/42/EC. This was awarded the EURO Test Prize of the EU Builder's Trade Associations. Since the new machinery directive went into effect in 2010, all new circular building site saws have been equipped with the newly improved safety hood and other essential safety components and have been delivered exclusively in this version.

As a market leader for circular building site saws and with more than 80 years of experience, we know what is important. With this knowledge, we work continually to keep products up to date, thereby offering the highest-quality, most durable and safest machines.Changes in the machinery directive For improved safety, we have developed a safety hood that has proven to significantly reduce occupational accidents as part of the revision of standard EN 1870-19 prior to the amendment of the Machinery Directive 2006/42/EC. This was awarded the EURO Test Prize of the EU Builder's Trade Associations. Since the new machinery directive went into effect in 2010, all new circular building site saws have been equipped with the newly improved safety hood and other essential safety components and have been delivered exclusively in this version.

Head for formwork prop: can be fitted on top of formwork props to hold the wood formwork support for which 4 corner angles are welded Tripod stand: the formwork prop can be fixed simply by a bracket that is supported movably on the tripod stand Formwork clamp: large size for stepless fixing by wedge. Eccentric clamp: for tensioning wire from 5 mm - 10 mm, load up to 2.500 kg Formwork clamp: made of 8 mm thick bent flat-bar steel. Wing nut WOF 27, casting, preferred use for grid-pattern formwork etc.

the proven prop for traditional building construction, hand crush and failure guards make handling these props safer. Our Euro formwork props comply with the current requirements of DIN EN 1065 for "free" props. A label affixed to the prop marks the adjusting range of the prop lock, the permitted loads depend on the extent length of the formwork prop, see table on page 69

Many different shapes are possible with just one mould – notwithstanding easy handling and short changeover times. The easiest way to produce a 3D room element is to use a fixed inner core with a slope. However, this approach is only suitable to elements in which the formation of a wall slope in the element is possible within the scope of the standards and static requirements. Such is the case for the design of garages or the production of transformer stations. For the production of substation elements in particular, we developed a solution that covers common types of stations, is flexible to use, and which can speed up the process in the plant.

Quicky is a compact precast dowel made from a single piece. Assembling and disassembling parts is not required. Quicky is injection-moulded from high-quality branded HDPE plastic and is therefore cheaper than metal-plastic sleeves. The threadless sleeve allows for the anchoring screw to be turned in and out with an electric screwdriver in seconds. The days of risky unscrewing of threaded parts (breakage!) and cumbersome manual screwing of the anchoring screw into threads that are frequently soiled with cement paste are gone at last!

The pocket battery moulds from RATEC incorporate all the creativity and engineering know-how of more than 40 years of experience in the development and rationalisation of precast concrete plants. Together with the proven upcrete® technology, our pocket battery moulds prove their high quality and cost-effectiveness day in and day out on three continents. The end product is characterised by smooth surface concrete on all sides as well as by the smallest geometric tolerances. The shutterings also impress with their ease-of-use and sturdiness.

The UPP Pump Station is suitable for the realisation of complex, smooth and high quality precast concrete parts. As the centrepiece of the upcrete® technology, the UPP creates possibilities where other filling techniques are out of the question for reasons of quality or feasibility.

The EURO RTM standard magnets were the first magnetic components to introduce magnetic shuttering solutions to modern precast concrete production. With their compact design and reliable retaining force, they are still suitable for many shuttering tasks and are used today in numerous plants. The special shape allows for various accessory components to be slipped over and safely fixed in place through positive locking.

With the SPB Standard Pro Magnetic Box, we have set the standard for switchable shuttering magnets in the precast concrete plant. The SPB is the original and offers absolute reliability and durability with its integrated Pro-Magnet, even in difficult conditions. The magnetic retaining core is tested regularly in our own magnet production to meet the specified retaining force. The SPB is ready to accommodate adapters and various shuttering skin carriers, which offer countless usage possibilities and thus maximum flexibility for the future. The Verbus rib screw connection offers countless possibilities for attaching shuttering skin carriers of all types and for integrating systems such as, e.g. Doka, Peri, H-beam carriers or RATEC shuttering systems.

The SAS-MF Module Flex shuttering system for solid and sandwich wall and ceiling panels is available in lengths of 500 mm to 8000 mm and features a modular variable height from 100 mm to 500 mm. The SAS-MF is optimised for quick shuttering skin changeovers and is suitable for many different types of shuttering skin (wood, alkus, smooth steel, tongue and groove, shear key, steel or rope connection loops). With a base, it is possible to implement various heights and shuttering shapes by changing the front plate. Even complicated element geometries and protruding reinforcements are possible.

All series are available with or without handlebar grip and with or without additional holes to accommodate angles. The usage possibilities of the standard magnets can be extended individually through accessories such as longitudinal or frontal suppressing or clamping adapters. — Magnetic rubber (series A) or neodymium magnets (series P and PDA) — Temperature exposure up to 60 °C, series P and PDA on request up to 80 °C — Eccentric removable — Smooth surfaces, easy to clean

Practical and flexible – with the new "Easy Form" shuttering system, even the most difficult shuttering situations can be dealt with quickly and easily. Different ribs allow for the shuttering height to be adapted seamlessly. With the flat base, protruding reinforcements from a height of 25 mm are possible. Easy Form is designed as a modular system, which can be easily expanded, supplemented and flexibly used even with just a few components. In combination with the vast range of accessories, this system always has the right answer for any shuttering situation.

Insert magnets for mounting and assembly from RATEC have been used for years in the precast concrete industry. They have proven themselves in tough everyday conditions. And through the combination of rubber bodies with integrated magnets, they can be produced in almost any geometry. Simple solutions make efficient work possible. The strong, integrated magnet fixes the insert part in the exact position.

The KBV crane concrete distributor is THE transport system for concrete from the mixing plant to the production area. Precise unloading not only saves concrete, but also improves the quality of your finished parts.

Insert magnets for mounting and assembly from RATEC have been used for years in the precast concrete industry. They have proven themselves in tough everyday conditions. And through the combination of rubber bodies with integrated magnets, they can be produced in almost any geometry. Simple solutions make efficient work possible. The strong, integrated magnet fixes the insert part in the exact position.

The RT U60 Pro shuttering system for the production of girder slabs and double walls is tailor-made pursuant to all customer requirements, such as robot handling, chamfering options, bearing fixtures and much more. With built-in magnetic automatic components based on our "Made in Germany” Pro Magnet series, the RT U60 Pro is extremely reliable and durable.

Insert magnets for mounting and assembly from RATEC have been used for years in the precast concrete industry. They have proven themselves in tough everyday conditions. And through the combination of rubber bodies with integrated magnets, they can be produced in almost any geometry. Simple solutions make efficient work possible. The strong, integrated magnet fixes the insert part in the exact position.

The TT Pro slab shuttering system from RATEC makes shuttering and demoulding of TT ceiling elements as easy as it gets. The system reduces the setup and retooling time by more than 5%. No crane is needed. When combined with the SPB 900 and the clamping adapter for the top header as well as the EURO RTM 900 for side shuttering, no welding is necessary, which reduces the setup time even further. The economy of scale is unbeatable.

The SAS Standard Automatic Shuttering is as unique as the shuttering challenges of our customers. We cut the system precisely to your requirements. The SAS is suitable for robots and can be configured for each shuttering robot. This makes it the perfect shuttering solution for automated operation, particularly in circulation systems. With integrated magnetic components with a retaining force of 900 – 2100 kg, it reduces the shuttering work steps to mere positioning and activation of the magnets.

Insert magnets for mounting and assembly from RATEC have been used for years in the precast concrete industry. They have proven themselves in tough everyday conditions. And through the combination of rubber bodies with integrated magnets, they can be produced in almost any geometry. Simple solutions make efficient work possible. The strong, integrated magnet fixes the insert part in the exact position.

— Magnetic rubber or neodymium magnets — Temperature exposure up to 60 °C, on request up to 80 °C — Can be delivered with or without chamfer — Partially available with and without groove — The adhesion side is polished — The open design is also available with aluminium caps screwed to the front — The magnet is released with a separate lifting tool

Insert magnets for mounting and assembly from RATEC have been used for years in the precast concrete industry. They have proven themselves in tough everyday conditions. And through the combination of rubber bodies with integrated magnets, they can be produced in almost any geometry. Simple solutions make efficient work possible. The strong, integrated magnet fixes the insert part in the exact position.

Simple and versatile – a wide variety of shuttering tasks can be easily accomplished with the MST. Thanks to its low weight, the MST is very easy to handle without a crane. The system's excellent static properties and fl exibility make the MST a true all-rounder for manual operation.

Insert magnets for mounting and assembly from RATEC have been used for years in the precast concrete industry. They have proven themselves in tough everyday conditions. And through the combination of rubber bodies with integrated magnets, they can be produced in almost any geometry. Simple solutions make efficient work possible. The strong, integrated magnet fixes the insert part in the exact position.

In addition to the various possibilities of using robots, we also offer different lifting beams for demoulding and easy handling, both for use with RATEC shuttering within and outside the centre of gravity. Our lifting beams are tailored to our shuttering by means of intelligent attachment solutions, allowing for safe and straightforward handling in the plant.

Insert magnets for mounting and assembly from RATEC have been used for years in the precast concrete industry. They have proven themselves in tough everyday conditions. And through the combination of rubber bodies with integrated magnets, they can be produced in almost any geometry. Simple solutions make efficient work possible. The strong, integrated magnet fixes the insert part in the exact position.

The UCI pump connection enables the supply of concrete with a formwork-smooth finish. This means that no curing is necessary and a clean filling process without residual concrete is guaranteed.

The quick and economical shuttering adapters from RATEC allow for efficient and safe fixing of shuttering elements. Our adapters feature integrated Pro-Magnets and can be combined to make the perfect addition to any shuttering system, for example for recesses, additional upstands in every corner or for fixing insert parts. Find out for yourself what our multitalents can really do. We would also be happy to develop individual adapter solutions for you.