Results for
THERMA THERMOFÜHLER GMBH
Germany
The compression-type fittings are the link between the thermocouple and the test area and facilitate precise adaptation. After installing the compression-type fitting, the thermocouple can be inserted and clamped in with the desired installation length. That makes it possible to perform individual measurements with self-defined installation lengths directly onsite.
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
The compression-type fittings are the link between the thermocouple and the test area and facilitate precise adaptation. After installing the compression-type fitting, the thermocouple can be inserted and clamped in with the desired installation length. That makes it possible to perform individual measurements with self-defined installation lengths directly onsite.
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
The compression-type fittings are the link between the thermocouple and the test area and facilitate precise adaptation. After installing the compression-type fitting, the thermocouple can be inserted and clamped in with the desired installation length. That makes it possible to perform individual measurements with self-defined installation lengths directly onsite.
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
The compression-type fittings are the link between the thermocouple and the test area and facilitate precise adaptation. After installing the compression-type fitting, the thermocouple can be inserted and clamped in with the desired installation length. That makes it possible to perform individual measurements with self-defined installation lengths directly onsite.
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
MSKVS-3,0-M8x1-SW10 The compression-type fittings are the link between the thermocouple and the test area and facilitate precise adaptation. After installing the compression-type fitting, the thermocouple can be inserted and clamped in with the desired installation length. That makes it possible to perform individual measurements with self-defined installation lengths directly onsite.
Request for a quoteSCHMITTER HYDRAULIK GMBH
Germany
Category Compressed-air technology / Fittings for air hoses / Valve extensions Product number supplier 301971
Request for a quoteSCHMITTER HYDRAULIK GMBH
Germany
arm plug nipple Category Compressed-air technology / Fittings for air hoses / Plug nipples for levers Product number supplier 301107
Request for a quoteSCHMITTER HYDRAULIK GMBH
Germany
arm plug nipple Category Compressed-air technology / Fittings for air hoses / Plug nipples for levers Product number supplier 301107
Request for a quoteTRANSFLUID® MASCHINENBAU GMBH
Germany
The machines are extremely robust and easy to operate. A selection of setups is available to process tubes of different lengths, with an operational length up to 240“ Our compact and mobile bending machines can now be controlled easily with a touch panel. This opens up new possibilities, like displaying the comparison of target and actual values for all axes. Control of the tolerance of the length and the rotation means very little involvement for the operator during the manufacturing of tubes. Accessories are available, like an integrated saw, a de-burring device, a flaring tool and a compression-fitting swaging tool.
Request for a quoteTRANSFLUID® MASCHINENBAU GMBH
Germany
The machines are extremely robust and easy to operate. A selection of setups is available to process tubes of different lengths, with an operational length up to 240“ Our compact and mobile bending machines can now be controlled easily with a touch panel. This opens up new possibilities, like displaying the comparison of target and actual values for all axes. Control of the tolerance of the length and the rotation means very little involvement for the operator during the manufacturing of tubes. Accessories are available, like an integrated saw, a de-burring device, a flaring tool and a compression-fitting swaging tool.
Request for a quoteTRANSFLUID® MASCHINENBAU GMBH
Germany
The machines are extremely robust and easy to operate. A selection of setups is available to process tubes of different lengths, with an operational length up to 240“ Our compact and mobile bending machines can now be controlled easily with a touch panel. This opens up new possibilities, like displaying the comparison of target and actual values for all axes. Control of the tolerance of the length and the rotation means very little involvement for the operator during the manufacturing of tubes. Accessories are available, like an integrated saw, a de-burring device, a flaring tool and a compression-fitting swaging tool.
Request for a quoteSCHMITTER HYDRAULIK GMBH
Germany
Tapered stems DIN 20034 material: steel, galvanized working pressure: 16 bar Category Compressed-air technology / Compressor fittings / Taper sleeves Product number supplier 333092500
Request for a quoteSCHMITTER HYDRAULIK GMBH
Germany
Tapered stems DIN 20034 material: steel, galvanized working pressure: 16 bar Category Compressed-air technology / Compressor fittings / Taper sleeves Product number supplier 333092500
Request for a quoteSCHMITTER HYDRAULIK GMBH
Germany
Wing nuts DIN 8537/20033 material: malleable iron, galvanized Category Compressed-air technology / Compressor fittings / Union nuts Product number supplier 333083818
Request for a quoteSCHMITTER HYDRAULIK GMBH
Germany
Wing nuts DIN 8537/20033 material: malleable iron, galvanized Category Compressed-air technology / Compressor fittings / Union nuts Product number supplier 333083818
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
The sheathing thermocouple from Therma is perfect for reliable and fail-safe temperature measurement in the exhaust gas system. It excels with its simple structure. By selecting double-walled sheathing material made of Nimonic75, this thermocouple is well prepared for corrosion influences and vibrations along with extremely high temperatures. Furthermore, assembly with a compression-type fitting lets you decide the installation length onsite. Sheathed thermocouples NiCr-Ni, Type “K”, Class 1
Request for a quoteOKS SPEZIALSCHMIERSTOFFE GMBH
Germany
Leak detector high detection sensitivity for pressurised piping and containers, e.g. on compressors, steel bottles, fittings, shut-off valves, breathing devices, oxyacetylene gas and inert-gas arc welding devices, Bunsen burners, valves, screw fittings of compressed-air lines etc. Suitable for compressed air, refrigerant, acetylene, butane, natural gas, carbon dioxide, gaseous oxygen, propane, town gas, nitrogen, hydrogen and, ammonia Suitable for checking the safety of systems with combustible gases and for avoiding financial losses through unrecognized leaks Advantages and benefits Frost-proof to -15°C Saves energy and warns of gas loss Contains corrosion protection inhibitors Tested by the DVGW in accordance with DIN EN 14291 Non-combustible Economical in use
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
EGE-ELEKTRONIK SPEZIAL-SENSOREN GMBH
Germany
EGE flow rate sensors for the flow rate detection of 10...100 l/min feature one-piece measuring tubes with an inner diameter of 20 mm from highly resistant stainless steel V4A (1.4571). For particularly aggressive media EGE offers special materials, such as bronze, Hastelloy, titanium or even PTFE. The devices can either be set up intuitively using a potentiometer and LED indications or easily programmed using buttons and a multi-segment display. EGE flow rate sensors can be installed in circuits with corresponding pipe diameters using threaded fittings or compression fittings. The provide excellent measuring results wherever the safe, robust and low-maintenance monitoring of low flows is required.
Request for a quoteEGE-ELEKTRONIK SPEZIAL-SENSOREN GMBH
Germany
EGE flow rate sensors for the flow rate detection of 10...100 l/min feature one-piece measuring tubes with an inner diameter of 20 mm from highly resistant stainless steel V4A (1.4571). For particularly aggressive media EGE offers special materials, such as bronze, Hastelloy, titanium or even PTFE. The devices can either be set up intuitively using a potentiometer and LED indications or easily programmed using buttons and a multi-segment display. EGE flow rate sensors can be installed in circuits with corresponding pipe diameters using threaded fittings or compression fittings. The provide excellent measuring results wherever the safe, robust and low-maintenance monitoring of low flows is required.
Request for a quoteEGE-ELEKTRONIK SPEZIAL-SENSOREN GMBH
Germany
EGE flow rate sensors for the flow rate detection of 1...10 l/min feature one-piece measuring tubes with an inner diameter of 4...10 mm from highly resistant stainless steel V4A (1.4571). For particularly aggressive media EGE offers special materials, such as bronze, Hastelloy, titanium or even PTFE. The devices can either be set up intuitively using a potentiometer and LED indications or easily programmed using buttons and a multi-segment display. EGE flow rate sensors can be installed in circuits with corresponding pipe diameters using threaded fittings or compression fittings. The provide excellent measuring results wherever the safe, robust and low-maintenance monitoring of low flows is required.
Request for a quoteDRIESEN + KERN GMBH
Germany
Low-Cost Humidity and Temperature Probe DKRF4050/DKRF4060 With the DKRF4050 and DKRF4060 Driesen+Kern GmbH well-priced instrument for humidity and temperature. With its G3/8” connection thread the compact cable probe (d=24.5mm, l=46mm) can easily be installed in plants and facilities. Alternatively, an extension for the probe is available with which the probe can be attached to a compression fitting. Two models are available: The DKRF4050 with 2 linear analogie outputs 0...1V/0...5V or 0...10V and the DKRF4060 with a CMOS-UART interface.
Request for a quoteEISELE GMBH
Germany
— Metric thread with hexagon socket — Chambered O-ring — Sealing NBR — Material brass nickel-plated — Temperature range -4 to 176 °F (-20 to +80 °C) — Working pressure range -14 to 232 psi (-0.95 to 16 bar)
Request for a quoteEISELE GMBH
Germany
— Whitworth pipe thread- Chambered O-ring — Sealing NBR — Material brass nickel-plated — Temperature range -4 to 176 °F (-20 to +80 °C) — Working pressure range -14 to 232 psi (-0.95 to 16 bar)
Request for a quoteNORIS GROUP GMBH
Germany
Stainless-steel stick-in sensor, thermocouple. Compact and robust design. Ideal for shipbuilding, thanks to their construction and approvals. Simple assembly via compression fitting. Sensor elements: type K o type J thermocouple. Available in various immersion depths. Straight cable outlet. Available in various cable lengths.
Request for a quoteNORIS GROUP GMBH
Germany
Stainless-steel stick-in sensor, thermocouple. Compact and robust design. Ideal for shipbuilding, thanks to their construction and approvals. Simple assembly via compression fitting. Type K or type J thermocouple; two thermocouples per sensor available as an option. Available in various immersion depths. 90° cable outlet. Increased measuring range up to 800 °C. Available in various cable lengths.
Request for a quoteNORIS GROUP GMBH
Germany
Stainless-steel screw-in sensor, Pt100 Robust design. Ideal for shipbuilding, thanks to their construction and approvals. Simple assembly for bearing temperature measurement. Available with a levelling piece and screw-in gland, as well as a compression fitting. Available in various immersion depths. Maintenance-free. Compatible measuring transducers, limit value switches and analogue indicators available. Design available with 1x Pt100, 2x Pt100 or 3x Pt100 measuring elements. Approvals: BV, DNV-GL, LR
Request for a quoteNORIS GROUP GMBH
Germany
Stainless-steel stick-in sensor, Pt100, thermocouple. Compact and robust design. Ideal for shipbuilding, thanks to their construction and approvals. Simple assembly via compression fitting. Pt100 measuring element or type K or type J thermocouple; two thermocouples per sensor or two Pt100 measuring elements available as an option. Available in various immersion depths. 90° cable outlet. Increased measuring range up to 800 °C. Available in various cable lengths. Approvals: DNV-GL, LR
Request for a quoteNORIS GROUP GMBH
Germany
Stainless-steel stick-in sensor (B form), Pt100/Pt1000, thermocouple, NTC thermistor. Compact and robust design (form B connection head). Ideal for shipbuilding, thanks to their construction and approvals. Simple assembly via compression fitting. Sensor elements: Pt100, Pt1000, NTC thermistor, type K or type J thermocouple; two integrated sensor elements available as an option. Increased measuring range up to 800 °C. Available in various immersion depths. Form B connection head. Available with integrated measuring amplifier. Approvals: BV, DNV-GL, LR
Request for a quoteGLÄSNER SANDSTRAHL MASCHINENBAU GMBH
Germany
The housing is made of folded stable sheet steel and welded. In the cabins 2 workports with built-in rubber sleeves (easily exchangeable) are incorporated. The cabin is equipped with a blast hose, nozzle holder and nozzle 1 made of hard metal. For the different requirements are made of hard metal nozzle with a diameter of 0.8 mm, 1.0 mm or 1.2 mm for selection. All blasting medium-pressure vessel (1 - 3 Tank System) have a volume of 2 kg and provided with a closure cap. In all systems, a pressure reducing valve and a pressure gauge for setting a constant jet pressure, and compressed air supply are fitted with plug-in nipple. All systems are equipped with a pneumatic foot switch for turning on and displaying the blasting process.
Request for a quoteResults for
Compression fittings - Import exportNumber of results
30 ProductsCountries
Company type