Results for
WILHELM-PLASTIC GMBH & CO KG
Germany
We offer polymer ceramic component parts where plastic molding is required for complicated particle shapes and where the thermal stability of plastic is insufficient.
Request for a quoteWITTE PUMPS & TECHNOLOGY GMBH
Germany
Witte chemical pumps are used as dosing pumps for a variety of fluids. Pumps of the CHEM series are designed and assembled exclusively at the Tornesch site, thus guaranteeing highest reliability and quality. For all our series we offer a comprehensive spare parts service on request. In addition, we also install the pumps directly at our customer's plant. Dosing pumps of the CHEM series are extremely flexible in their design and can be offered in various variants and equipment thanks to a modular system. Differential pressures up to 120 bar, suction pressures vacuum up to 15 bar Temperatures up to max 500 °C in combination with a magnetic coupling. Viscosities up to 1.000.000 mPas or higher Components made of stainless steel, ceramic and special materials Flow rates from 20 l/h to 170,000 l/h
Request for a quoteMKV METALL- UND KUNSTSTOFFVERARBEITUNG GMBH
Germany
Diversity meets experience Surface treating and coating processes are just as numerous as they are diverse. We develop customtailored systems for almost any application, taking into account customer process specifications: Electroplating and chemical coating of metal component Electroplating and chemical coating of plastic components Aqueous cleaning of metal components Cathodic dip coating Electropolishing stainless steel and copper components Etching and staining metal components Etching glass and ceramic
Request for a quotePRECISION SURFACING SOLUTIONS GMBH & CO. KG
Germany
These machines are capable of executing complex lapping routines while producing precise and repeatable results. These units, available for maximum component diameters of 51mm on the DL175, 114mm on the DL370, up to 170mm on the DL500, can lap a wide range of materials to very tight specifications. Excellent results have been obtained in the processing of a wide range of materials and components including glass, ceramics, crystals and ferrous materials. The Lapmaster line of Dual-Lap machines are based upon a two-way & three way planetary concept designed to yield very precise and repeatable results. Only the Inner and Outer Gears rotate allowing the carriers to move around the surface of the plates, whilst the top and bottom plate stay stationary. The larger DL500 and DL770 use a 3-way system, where the top plate, bottom plate and sun gear rotate.
Request for a quoteHITACHI HIGH-TECHNOLOGIES EUROPE GMBH
Germany
You can select form three types of FT150 series depending on the required sample applications. The standard spectrometer configuration allows you to analyse (as example): - electrical components, such as PCB, FPC, micro connector, lead frame etc. - chip component electrodes - general analytics for almost all other kind of samples and coating stacks. The types FT150 and FT150L enable especially the measurement of ultra thin coatings, such as Ni/Pd/Au from PCB connectors by polycapillary optics and an improved high-sensitive 50mm2 SDD detector. Two sizes of sample chamber and stage can be selected to accommodate standard (FT150) or large samples (FT150L). The FT150h using the new poly-capillary system enables the precise investigation of Sn and Ni layers in ceramic chip components by a simultaneous measurement, which is very difficult using conventional capillary or collimator optics. All three configurations have in common that the use of polycapillary optics and a high throughput SDD
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
WI.TEC -SENSORIK GMBH
Germany
KOMBI.sens® is a combination of ULTRA.sens® and INFRA.sens® with common base electronics. With this unit, up to 3 gas components can be measured simultaneously. The base electronics can simultaneously supply IR and UV radiation sources. This system is an ideal platform for the detection of multi-component gas at different concentration ranges (vol% and ppm) Combination of IR and UV technology Up to 3 gases + O2 Space-saving construction Cross-billing possible with each other Applications Elemental Analysis Industrial Gas Analysis Emission monitoring (CEM) Laboratories Biogas Research Properties Optimal adaptation to the measuring task Combination of IR and UV technology High accuracy Low power consumption Compact size
Request for a quoteWI.TEC -SENSORIK GMBH
Germany
For the detection of NO and H2S an EDL (electrodeless gas discharge lamp) is used. A combination of both technologies (UVRAS & UVLEDs) allows simultaneous gas analysis of NO, NO2 and SO2 in the lower ppm range, which is particularly important in flue gas analysis (CEM)2. In the EDL, N2 and O2 are converted to NO and produce selective UV radiation. With this radiation a cross sensitivity free NO measurement is made possible. This method is called UV resonance spectroscopy (UVRAS). Applications Exhaust gas monitoring (CEM)2 Laboratory area Biogas research Industrial gas analysis Engine test benches Portable gas analysis (PEMS)3 Features & Benefits Simultaneous NOx and SO2 analysis Temperature controlled up to 55°C Fast response time < 3 seconds Durable EDL (> 16000h) Flow-independent measurement 0-2L/min No influence of gas humidity No NOx converter required High accuracy Low power consumption Compact size
Request for a quoteWI.TEC -SENSORIK GMBH
Germany
The ULTRA.sens® is the world’s first OEM gas measurement module based on miniaturized UV LEDs. The stability and lifetime of these UV-LEDs enables high-precision gas analyses down to the ppb range. By using two UV-LEDs 2 gases can be detected simultaneously. With this approach, 2 measuring ranges from ppm to Vol.-% can also be realized. In the spectral range from 200 nm to 500 nm, nitrogen oxides (NO+NO2), aromatic hydrocarbons, hydrogen sulphide, ozone, sulphur dioxide and chlorine can be reliably detected with this novel sensor platform. Applications Environmental and Process Measurement Technology (CEM) Engine development TOC analyzers Elemental analysis Industrial gas analysis Natural gas/biogas analysis Process measurement technology Biogas research
Request for a quoteWI.TEC -SENSORIK GMBH
Germany
The ULTRA.sens® is the world’s first OEM gas measurement module based on miniaturized UV LEDs. The stability and lifetime of these UV-LEDs enables high-precision gas analyses down to the ppb range. By using two UV-LEDs 2 gases can be detected simultaneously. With this approach, 2 measuring ranges from ppm to Vol.-% can also be realized. In the spectral range from 200 nm to 500 nm, nitrogen oxides (NO+NO2), aromatic hydrocarbons, hydrogen sulphide, ozone, sulphur dioxide and chlorine can be reliably detected with this novel sensor platform. Applications Environmental and Process Measurement Technology (CEM) Engine development TOC analyzers Elemental analysis Industrial gas analysis Natural gas/biogas analysis Process measurement technology Biogas research
Request for a quoteWI.TEC -SENSORIK GMBH
Germany
The ULTRA.sens® is the world’s first OEM gas measurement module based on miniaturized UV LEDs. The stability and lifetime of these UV-LEDs enables high-precision gas analyses down to the ppb range. By using two UV-LEDs 2 gases can be detected simultaneously. With this approach, 2 measuring ranges from ppm to Vol.-% can also be realized. In the spectral range from 200 nm to 500 nm, nitrogen oxides (NO+NO2), aromatic hydrocarbons, hydrogen sulphide, ozone, sulphur dioxide and chlorine can be reliably detected with this novel sensor platform. Applications Environmental and Process Measurement Technology (CEM) Engine development TOC analyzers Elemental analysis Industrial gas analysis Natural gas/biogas analysis Process measurement technology Biogas research
Request for a quoteWI.TEC -SENSORIK GMBH
Germany
The ULTRA.sens® is the world’s first OEM gas measurement module based on miniaturized UV LEDs. The stability and lifetime of these UV-LEDs enables high-precision gas analyses down to the ppb range. By using two UV-LEDs 2 gases can be detected simultaneously. With this approach, 2 measuring ranges from ppm to Vol.-% can also be realized. In the spectral range from 200 nm to 500 nm, nitrogen oxides (NO+NO2), aromatic hydrocarbons, hydrogen sulphide, ozone, sulphur dioxide and chlorine can be reliably detected with this novel sensor platform. Applications Environmental and Process Measurement Technology (CEM) Engine development TOC analyzers Elemental analysis Industrial gas analysis Natural gas/biogas analysis Process measurement technology Biogas research
Request for a quoteResults for
Components- ceramic - Import exportNumber of results
12 ProductsCountries
Company type