Component for plants - Import export

Precision locking Clamping of machinery and plant components Locking units are used primarily as functional clamps for precision locking, but also for preventing unwanted movement. Series KFH, KFP, KB... Extensive standard range with numerous series for special applications, including outdoor, cylinders, machine tools DGUV and Lloyd’s approved series available Both load directions

Safe energy and data transmission The igus® Chainflex® cable range offers a choice of over 850 different cables, available from stock. A main focus of the range are the data and bus cables. Solutions based on copper, glass or plastic fiber optic cables are provided for almost all bus systems in industrial use. We continue to provide you with all supply cables for your drive systems such as motor cables with and without brake/tacho cables and the matching feed cables. Ready assembled with plugs and sockets on request. Cost-reducing assembly The use of pre-assembled E-ChainSystems® enables expensive assembly hours at the place of installation to be considerably reduced. Functionally tested systems guarantee that plant components are soon put into operation. Assembly service We would be pleased to send you an offer for complete solutions, including all assembly services. You do not tie up your own resources and you have a trouble-free energy supply system for the future at a fixed price. LBT FLIZZ® - High speeds and accelerations Travel distances up to 120m, travel speed up to 8 m/s Suitable for moving or stationary controls, ideal for all bus systems When light weight is required When quiet, maintenance-free operation is required When rust-proof property is required At -10°C to +60°C constant temperature At accelerations over 10 m/s² Energy supply system for all media, not only electrical Also suitable for outdoor use (with reduced load data) Your benefit from LBT FLIZZ® Guaranteed service life Cost-effective compared with conventional energy supply systems Cable protected against dirt, rain, sun, ice, snow and leaves Insensitive to wind and motion Good resistance to chemicals, solvents, etc. Use of special cables possible, e.g. servo drive cables, fiber optic cables, bus systems etc. almost maintenance free Quick and easy installation due to delivery as a ready-assembled system Easy integration with existing plants Cable length 50% of the travel distance No central cable junction No effort required to maintain carriages Sewage treatment plant Longitudinal scrapers Sand traps Rain water overflow reservoir Galvanizing equipment Cranes Plant construction Space-saving and compact energy supply with LBT FLIZZ® - low maintenance system, delivered pre-fitted with ready-assembled igus® E-Chain Energy supply system protected from wind and weathering. The used materials are weather-resistant, as well as resistant against most chemicals, oils, fats, coolants and solvents Solid plastic with powder-coated support tubes Modular assembly: the system can be enclosed with intermediate panels! Can be delivered pre-fitted Variable fields, which are simply screwed on top of each other Glide rail integrated in the profile

Strainer for protecting downstream plant components against contamination. All parts in contact with the media are made from stainless steel, therefore it is also suitable for aggressive media.

AViTEQ offers a wide range of accessories and spare parts for vibration plants and components. Pease contact us for solving your task. Contact us Download Liners - PDF (583kB) Download Sealings - PDF (438kB) Download Vibration insulation - PDF (706kB) Download AViTEQ Vibrationstechnik GmbH | Im Gotthelf 16 | 65795 Hattersheim | Germany Phone +49 (0)6145/503-0 | E-Mail info(at)aviteq.de © 2016 AViTEQ Vibrationstechnik GmbH

The vacuum technology is divided into the areas of measurement, generation and maintenance of a vacuum and the resulting technical applications. Vacuum technology is used in various fields of research and industry, for example in the handling and treatment of materials, in food and medical technology. Benefit from our many years of expertise in the conception and implementation of innovative and high-quality solutions in the field of vacuum technology components and plants.

Stress, hectic, rushed eating and hidden fats in the food strain burden our digestion more and more and so our well-being. Lots of people swear by the valuable plant components of artichoke and papaya that contain the natural enzyme papain. In addition, artichokes contain the natural bitter substance cynarin.

You require a mobile steam plant or you want to install a steam plant outside your plant building? Then the complete installation within a container is the ideal solution for you. The container steam plant contains all the required components – from the water treatment plant through to the steam trap. - CERTUSS steam generator - CERTUSS CVE supply unit - Feed water treatment - Steam distributor - Pressure reducer station - Clarification valve - Steam dryer - Condensate elevating system - Steam trap - Interior lighting of the container - Insulated pipe installation in the container - Emergency-off switch - Steel door or uPVC door - High-quality stainless steel wall with insulation - Outside coating as required The installation and commissioning of the container plant at the customer is on request either carried out completely or only partially (if an external installation company is used) by our customer service.

You always know what is going on in your plant: Gas detection system Statox 505 compliant to SIL 2 Standard Intelligent Gas Sensors for AsH 3, Cl 2, ClO 2, CO, COCl 2, H 2, H 2S, HCl, HCN, HF, N 2H 4, NH 3, NO 2, O 2, O 3, PH 3 and SO 2 The Statox 505 new 4 – 20 mA Transmitter for toxic gases and oxygen features everything that a new gas detection instrument of the latest generation needs: State of the Art components (hardware and software), smart sensor technology, “heartbeat” sensor control and complete system diagnostics on board. What makes the Statox 505 so reliable? In process monitoring, the status of plant components in case of a failure is becoming more and more a critical issue. The standards DIN EN 61508 as well as the product standard DIN EN 50402 are powerful tools to calculate the probability of a failure on demand. The Statox 505 complies with all of the requirements of these standards. It obtained the safety integrity level SIL 2. This provides a reliable database for the user to calculate the safety standard of his plant. If the Statox 505 is operated as a SIL 2 component, a so called “proof test” in certain time intervals is mandatory. All OK All important parameters such as sensor „heartbeat“, signal output, calibration, zero, sensitivity, temperature, sensor memory, amplifier, CPU, power supply etc. are continuously monitored for proper function. In case of a failure, an alarm will be triggered. Thus the system cannot fail without the error being noticed. A green LED signalizes the system status. The display and the controls are located at the inside of the housing - well protected from the elements. Minimum time and work in the field The sensors of the Statox 505 are plug and play technology. Each sensor has a F-RAM on board which communicates all relevant parameters to the sensor head: Gas, measuring range, last calibration, ex works calibration, response time etc. The sensors can easily be calibrated in the shop. For the user this means that he never ever will have to do calibration work in the harsh elements (wind, rain, cold, heat). No more lugging heavy test equipment and gas cylinders into the field. All the user has to do in the field, is plug the sensor back in. To do that, you don`t even need a tool! While the sensor is getting calibrated in the shop, the sensor cartridge stays in place and protects the sensor head from dust and rain. Trouble- free wall - or pipe mounting The Statox 505 comes with a mounting plate for either wall - or pipe mounting. No need to open the sensor head for plant installation Storage temperature

Scheduling The co-ordination and integration of the delivery in your project planning is of decisive importance. Many years of experience in the area of heavy cargo logistics ensure precise and safe realisation from the production plant to installation of your building. Cases where large plant components supplied by the customer must be integrated during station installation are also typical. We have therefore staffed this extremely important interface to our customers and business partners with experienced and farsighted scheduling personnel. This also represents the core of our overall logistic and transportation processes. We arrange with the latest supporting systems mobile cranes, all transports and installation personnel to ensure they are in the right location at the right time, taking advantage of optimised delivery programs and well-balanced utilisation capacities to ensure that realisation is particularly efficient. Dedication to deadlines is our highest priority....

Earthing Clear tasks relating to earthing arise from relevant norms and regulations: DIN VDE 0101: 9.3.4 Measuring for earthing of operating media and systems All exposed metal parts of electrical operating media which are not part of the operational power circuit (structures), which are part of the electrical network must be earthed.Insulated areas should be created in special cases. All metal parts which are not part of electrical operating media should be earthed, provided this is appropriate (e.g. due to accidental arcing, capacitive and inductive coupling). Betonbau generally realises this task through discretely-structured visible connections between the HPAS of the building and active plant components. This offers you the advantage of high process reliability and contributed to overall comprehension and verifiability for everyone. Reinforced concrete also offers enormous advantages in itself with regard to equipotential bonding and integration in earthing current circuits.

Applications: Medium to small sized drums, barrels, containers, canisters, buckets, oil cans, filling funnels and small plant components

Applications: Small to medium sized drums, barrels, containers, canisters, buckets, oil cans, filling funnels and small plant components

Application: Permanent grounding connection between plant components or use as replacement part for existing TIMM Bite clamp + straight cable assemblies.

Applications: Small cans, canister, buckets, funnels; filling and pouring on work and laboratory benches; earthing of very small plant components or when using small drum pumps or stirrers

Application: Permanent grounding connection between plant components or use as replacement part for existing TIMM Bite clamp + coiled cable assemblies.

High-temperature vacuum-formed products made from biosoluble ceramic fibres are lightweight and solid parts or structural elements that can be used at temperatures up to 1.400 °C in air and in aggressive environments, including direct contact with liquid metals. — 100% biosoluble — high temperature resistance — low thermal conductivity — high chemical resistance * — low weight — good tear resistance — high flexibility — easy processing — complicated geometries can be produced — recyclable * to achieve higher acid resistance, a special coating is required. Available from manufacturer. Application: Burner plant components, crucibles, thermocouple housings, coupling devices in continuous casting plants, channel elements of metal troughs, inlet device in the melting of non-ferrous and ferrous metals, gasket in aluminium foundries, gaskets in blast furnaces, expansion joints, pipe insulation, catalyst insulation, repair work in the high temperature range.

Control cabinets form the technical "central nervous system" of every production plant. They supply machine and plant components with electrical energy, protect electrical circuits, control drives and network machines with the Internet. In addition, they act as an interface for all information on the current plant and processing status and link production exactly where processes need to be accelerated and efficiency increased. Our subsidiary ATR Industrie Elektronik GmbH is your competent partner for the construction of switchgear and switch cabinets. We supply a wide range of different versions based on all current national and international standards. Switchgear is used in almost all industries, in addition to the wood-based panel and metal industry, e.g. in the automotive sector, in turbine and compressor technology, in energy supply or also in cooling and air-conditioning technology.

Economic and safe: Hydraulic bolt tensioning systems Single clamps or small clamps for opening and closing reactor pressure vessels or other primary circuit components As a specialist for the design, construction, supply and maintenance of highly automated bolt tensioning systems, we offer our customers demand-oriented solutions for opening and closing pressurized and boiling water reactors as well as other primary and secondary circuit components in nuclear power plants. Our range of services includes single and multiple bolt tensioning devices, bolt turning and handling systems, bolt and blind hole cleaning systems. Siempelkamp bolt tensioning machines reduce your operating sequences for opening and closing to less than 50 % compared to conventional methods

We build entire plants and components for your recycling process line: separating – washing – conveying – processing METZEN provides you with machinery and complete plants for plastics recycling, e.g., for agricultural films, PET bottles, mixed municipal waste and much more. We build components for every stage of your process line: separating – washing – conveying – processing

Roll Compactor The roll compactor plant – the solution for low-dust products With our roller compactor plants powdered components especially low in dust can be condensed into granulate. In this case, several components with divergent properties can be mixed and granulated together. This way our roller compactor plant allows an efficient complete production of granulates from powder mixtures. The plants used at Ebbecke Verfahrenstechnik are equipped with pre-and fine granulators, while at the same time fine particles are fed back via post-screening. All granulation plants are continuously adjustable in their pressing force, in addition part of the plants are equipped with pre-compression by means of a vacuum intake. Technical data Granulation performance: 5 - 500 kg/h Product intake by means of: Pre-compressor screw (two-step) and vacuum intake (partial) Product-contacting parts: Stainless steel Feeding from: Big Bag, oktabin, bagged goods, cardboard boxes, drums Platform const

Being the smallest model of the new Q series, the Q 1500 achieves precise plasma cuts at the highest level for material thicknesses of up to 60 mm and with a maximum cutting current of 150 A. New components and especially the operator interface Q-Desk meet the complex requirements of a digitalised production in the age of Industry 4.0. The specially developed browser-based operator interface Q-Desk provides real-time process data and information of all plant components on any standard device and location-independent. The user benefits from extensive information enabling him to plan and execute a variety of maintenance tasks as guided by the system. This generation of plasma cutting systems is the result of intensive research and development work by Kjellberg and a landmark in the 60 years of Kjellberg's plasma history. The new digital plasma series Q sets pioneering standards regarding quality and connectivity.

The plasma cutting machines Q 3000 and Q 3000 plus combine precise, highest-level plasma cutting and marking with a maximum cutting current of 300A. Thanks to the modular design, the machine performance of the Q 3000 plus can later be upgraded and, thus, adapted to the customer's requirements. The specially developed browser-based operator interface Q-Desk provides real-time process data and information of all plant components on any standard device and location-independent. The user benefits from extensive information enabling him to plan and execute a variety of maintenance tasks as guided by the system. This generation of plasma cutting systems is the result of intensive research and development work by Kjellberg and a landmark in the 60 years of Kjellberg's plasma history. The new digital plasma series Q sets pioneering standards regarding quality and connectivity.

Waste air purification with a wide range of applications achieving extremely low clean gas values also at low residual concentrations. Odor-intensive pollutants like H 2S, Mercaptanes, VOC etc. are being removed due to the high loading capacity of the activated carbon. Easy process technology universal applicability multiple in-situ regeneration possible no additional energy consumption low pressure drop because of hard and abrasion-restistant activated carbon High purification efficiency even with high moisture content until air moisture of 98% well-suited for humid air from sewerage and wastewater treatment plants Reasoned concept manholes for infilling or exchange sampling tube for measurement of loading of activated carbon Long lasting construction plant components made of corossion and chemical resistant materials 30 years of experience Active references of each size Worldwide delivery, installation and service

Multiventuri scrubbers are suitable for the separation of adhesive aerosols and for fine dust in humid waste air as these filtrating separations lead to adhesion, clogging and thus to irreversibel high filter resistance. In a wet separating process, the particles are washed out and thus cannot adhere. Reliable and automatic operation Automatic elutriation Automatic washing of separated elements Automatic discharge of the Ausschleusung der nicht absetzbaren ölhaltigen Stäube Level switch in pump sump Dry run protection Control of the nozzle inlet pressure Frost protection for outside installation Advantages Suitable for hot waste air Easy to maintain user interface Big flexibility with unsteady raw gas load Compact execution Durable construction Plant components made of corrosion and chemical resistant FRP 30 years of experience Active references of each size Worldwide delivery, installation and service

Benefit from the advantages of the biofilter and of the counter current scrubber in one single system. Thanks to the high specific surface of the packing material and thanks to a controllable irrigation a demanding concentration of contaminants like H 2S can be treated in a compact system. Cost-effective Space-saving construction that can be built into height No filter material exchange Microorganisms settle at inert materials Low running costs with high concentrations of contaminants Easy to maintain user interface Controllable milieu conditions Regulation of water supply Dosing of mineral nutriments Automatic pH-control Automatic desalination Well-thought-out conception Self-cleaning measuring probes Low pressure drop Low risk of clogging Durable construction Plant components made from corrosion and chemical resistant materials 30 years of experience Active references of each size Worldwide delivery, installation and service

Due to its process-integrated biological degradation, the biofilter is an incomparably cheap and efficient procedure for odour removal and the treatment of low concentrated or undefined air flows. This advantage lies in the natural decomposition of air pollutants into harmless products. Incomparaply cheap technique Simple process technology Operation through permanent staff of the operator Advantage through the natural reaction conditions of the catabolism Flexible concept Reduced operating costs regarding Energy consumption Water consumption and effluent water Use of chemicals Maintenance efforts Long-lasting construction Plant components of corrosion resistent and chemical resistant materials Biologically active filter material High inner surface for the settlement of microorganisms Steady perfusion Good drainage impact Integrated pre-scrubber Dampening of the air until saturation Stripping of pollutants through the microflora for an optimal operation Dosing of various...

Our crossflow scrubber reaches an optimum of flexibility. By flowing through various scrubbing stages consecutively, dust, acid or alkaline substances are removed within one plant. Flexibility Adaptation to your complex waste air Multiple stages in one housing Simultaneous elution of different contaminants Low construction height without waste loss Scrubbing stages sind nicht baulich getrennt Easy to maintain user interface Optimal consumption Efficient supply of fresh water Optimal dosing of chemicals Low pressure drop and low pump duty Reliable and fully automated operation Level switch in pump sump Dry run protection Monitoring of nozzle inlet pressure (Düsenvordruckes?) Fully automated, measurement driven control of chemical dosing Automatic desalination Frost protection for outdoor installation Low risk of clogging by choice of the right packing material Durable construction Plant components made of corrosion and chemical resistant FRP 30 years of experience Active...

Installation – maximum concentration on site If desired, Hilgefort can also assemble the plant components and perform final Installation and commissioning on-site. We will also be happy to provide instruction on use of the plant component and assistance in the event of unforeseen difficulties occurring during the Installation. Even years after commissioning, you can rely on us as an expert contact partner for help with any other issues, such as wear. Experience and skill – even in sensitive areas For many years, we have also been responsible for performing the final assembly of plant components produced by us in our customers’ industrial facilities and factories. Hilgefort experts have all the necessary qualifications to be permitted to work on sensitive factory premises, such as those in the chemical and petrochemical industry. Our construction supervisors and assembly personnel are certified by the SCC, which governs (occupational) health, safety and environmental (HSE)...