Coating materials - Import export

Many materials cannot be measured tactilely, therefore non-contact thickness measurements become necessary. Especially e.g. with glowing materials, or wet processes, a continuous tactile measurement is nearly impossible. Furthermore, web speeds in plant engineering and production have increased, requiring a corresponding fast sampling rate of the measuring systems. In addition, high measuring widths are often required. Why is contact free measurement technology so perfect for this application? Can be used in any web width, Scalable measurement thicknesses from a few millimetres to several meters, Thickness and coating thickness can be measured for different materials, Vibrations of the web materials, can be compensated, Turnkey solution for mechanical engineering, Non-contact and non-destructive measurement method, Large distances to the measured object are possible, Measurement of free forms,

▪ Contactless application ▪ Suitable for lubricants, greases, anaerobic and other adhesives ▪ Materials with low as well as high viscosity applicable ▪ vipro-SPIN feeded by ViscoTec 3RD3 or 3RD4 dispenser ▪ Four different spinning heads available ▪ Continuous spraying ▪ Easy integrateable to different control unit systems due to open end cable

Of base material 280X equal 20MNV6, fit f7, with 30 µm Nickel + 20 µm chrome coating Material Dimension range NIKROM 350 20 - 140 mm

Special release agent for production boards made of wood and plastic1) during concrete block finishing. (1) impact assessment possibly required.) Significantly reduced the adhesion of coating materials, protects the production board, softens excess coating residues making clean-up easier, environmentally friendly, since it is biodegradable.

Metallic reflection coatings enhance reflection and are used in many optical instruments for light deflection. We coat glass, metal and plastic. The choice of coating material depends on the reflection requirements in the defined wavelength range. We use aluminium, gold, silver and chromenickel, either with or without protection coating for the VIS, UV and IR ranges.

In our catalog for coatings, machining and profiles for belts, you will find all the different possible materials for coatings of belts. The possibilities for machining and amny examples for transportation cleats and profiles.

Make your forklift even more flexible with the a secutex prong protection coil. After you have secured everything for careful transport, back the lift prongs out of the secutex prongs protection coil and continue to use the forklift normally. Mounting various prongs can be omitted. The secutex prong protection coil is carried by both prongs. The secutex protective coating avoids material damage and prevents the coils from slipping.

OIL HEATER FAN IDE 60 DThe integrated fuel tank makes the high-performance direct oil heater fan IDE 60 D our best recommendation for use on construction sites, in halls and so forth! Whether for direct permanent heating in agriculture and production, on construction sites or in storage facilities – there are many typical standard oil heating tasks where sound technology with ideal value-for-money ratio and a high 60 kW heat output is called for. Our response: The oil heater fan IDE 60 D. This ready-for-use heating device is a particularly efficient directly fired oil heater fan and due to its durable housing made of doubly coated material is optimally prepared for various heating applications in well-ventilated areas. In the course of this, the IDE 60 D’s large air outlet ensures a maximum expansion of warm air with a high efficiency level of 100 %.

The anodising process used at mbw is used for the surface treatment of die-cast aluminium. By anodic oxidation, wear and corrosion resistance, as well as the natural protective coating of the base material, are improved. Anodising increases wear and corrosion resistance. This process is suitable for rack goods

Dimensions Depending on the required stamp power (material strength, material thickness, and part shape) Material All spring materials in soft and hard condition as well as quality steels with lower strengths and aluminum alloy and also special alloy Stainless steel up to 1900 N/m² Rubber-coated strip material Hardening Through external services Coating Fully or partly coated strip material In-house phosphating In-house stove-enameling Additional coatings through external services Specialities Fully automated manufacturing of components and mounting Fully automated welding Contact springs with contact rivet Bushes clinched, welded, and open Special processing like thread cutting, screw mounting, and rivets feasible Special packaging in blister pack, trays or magazines Rapid prototyping

OIL HEATER FAN IDE 30Flexible all-rounder for a wide range of heating applications: the ultramobile oil fan heater IDE 30 If you are looking for an equally cost-effective and reliable oil heating solution with clean, dry, warm air for the flexible heating of workshops, storage and production zones, construction sites or halls, the compact oil heater fan IDE 30 is our best recommendation. Owing to its durable housing made of doubly coated material, this indirectly fired oil heater fan is optimally prepared for outdoor heating applications and can further be used for heating closed rooms when applying the optionally available flue gas discharge. The firing of the IDE 30 can variably be made with diesel or fuel oil, the constant supply of which is ensured by a high-quality Danfoss injection pump. The external fuel filter enables an easy access and the current amount of fuel can conveniently be read from the integrated tank filling level indication.

OIL HEATER FAN IDE 50The indirectly fired oil fan heater IDE 50 ensures clean, dry hot air Indirectly fired air heaters such as the oil heater fan IDE 50 are an ideal solution to provide large amounts of clean and dry hot air, as it is required for the heating of construction sites, marquees, exhibition halls, workshops or stables. Longer outdoor applications are no problem for the oil heater fan IDE 50, because it is provided with a durable housing made of doubly coated material, borne by a smooth-running carriage construction with cable holders and installed fuel tank. When employing the optionally available flue gas discharge, this heating device can also be flexibly used for the fully automatic heating of closed rooms.

OIL HEATER FAN IDE 20Flexible all-rounder for a wide range of heating applications: the ultramobile oil fan heater IDE 20 Hot air in a trice at a low price: The smallest oil heater fan of the IDE series from Trotec comes up trumps if you are looking for a compact and low-priced yet reliable oil heating solution for flexible heating applications. Whether in workshops, warehouses, production zones or on construction sites – with a heating capacity of 20 kW the IDE 20 confidently generates clean and dry hot air in quantities of up to 600 m³/h. Even longer outdoor applications present no obstacle to the oil heater fan IDE 20, because it is provided with a durable housing made of doubly coated material, borne by a smooth-running carriage construction with cable holders and installed fuel tank. When employing the optionally available flue gas discharge, this heating device can also be flexibly used for the fully automatic heating of closed rooms.

Sliding coating of materials of all kinds, such as metals, glass, ceramic, wood, leather and plastics As lubricant for threads of all kinds, such as machine screws, thread-cutting screws, sheet-metal and wood screws for increasing pre-tension forces or reducing screw-in torques As dry lubricant for maintenance and care of plastic/metal sliding pairs For assembly of axial face seals or dry lubrication in textile or paper-processing machines Advantages and benefits Highly effective due to outstanding film-forming properties Broad range of uses for dry lubrication in maintenance and care Waterproof and resistant to weathering

Sliding coating of materials of all kinds, such as metals, glass, ceramic, wood, leather and plastics As lubricant for threads of all kinds, such as machine screws, thread-cutting screws, sheet-metal and wood screws for increasing pre-tension forces or reducing screw-in torques As dry lubricant for maintenance and care of plastic/metal sliding pairs For assembly of axial face seals or dry lubrication in textile or paper-processing machines Advantages and benefits Highly effective due to outstanding film-forming properties Broad range of uses for dry lubrication in maintenance and care Waterproof and resistant to weathering

Surface treatment applications are very demanding. ASP has developed a range of original and efficient solutions in response to these processes. Made of coated fabric or rubber-based material, ASP covers are always the ideal answer to your robot protection requirements.

Swivel and fixed castor Fastening by means of special adapter plates (accessories) or integrated mounting plates especially for use with aluminum profile systems, as positive locking and anti-rotation fastening without lateral protrusion on aluminum profiles with pitch 38 mm -1.5", 40 mm and 45 mm Swivel castors with double locking device; the locking device prevents the wheel from rolling or turning Fixed castors have no lock wheel body diameter: 80/100/125 Tread: TPE gray RAL 7031/7024; solid rubber gray RAL 7001, black, PA, black plain bearing, Design: ESD-capable possible Material housing: steel, aluminum powder coated Material adapter plate: zinc die-cast, aluminum color powder-coated different load capacity: 600-1200 N Translated with www.DeepL.com/Translator (free version) possible accessories: extension arm

The modular system of the MBS series is available in three sizes. The MBS 400 is the “largest" of the three models and processes materials such as tubes and profiles of up to 390 mm wide. Depending on the material size, further machine elements such as type and number of cutting tools, length and width of the belt feed, control, feed, running direction, coating material of the conveyor belts and base frames are selected. Metzner "MBS series" cutting machines stand for outstanding flexibility when machining flexible and semi-rigid profiles made of rubber and plastic. With different cutting methods and machine components, cutting machines are created which can be individually adapted to customer requirements and are made available in the shortest possible time with hardly any development effort.

The modular system of the MBS series is available in three sizes. The MBS 200 is the "medium-sized" of the three models and processes materials such as tubes and profiles up to 190 mm wide. Depending on the material size, further machine elements such as type and number of cutting tools, length and width of the belt feed, control, feed, running direction, coating material of the conveyor belts and base frames are selected. Metzner "MBS series" cutting machines stand for outstanding flexibility when machining flexible and semi-rigid profiles made of rubber and plastic. With different cutting methods and machine components, cutting machines are created which can be individually adapted to customer requirements and are made available in the shortest possible time with hardly any development effort.

The modular system of the MBS series is available in three sizes. The MBS 100 is the "smallest" of the three models and processes materials such as tubes and profiles of up to 90 mm wide. Depending on the material size, further machine elements such as type and number of cutting tools, length and width of the belt feed, control, feed, running direction, coating material of the conveyor belts and base frames are selected. Metzner "MBS series" cutting machines stand for outstanding flexibility when machining flexible and semi-rigid profiles made of rubber and plastic. With different cutting methods and machine components, cutting machines are created which can be individually adapted to customer requirements and are made available in the shortest possible time with hardly any development effort.

Suitable for treatment of wood, plaster, masonry and clinker surfaces as well as oiling of canvases and priming agent for oil paint. Linseed Oil Varnish is a natural wood preserver and offers a durable and open-pore coat for these materials. Our product is pure, free of resin and toxic agents, it produces an impregnating layer and highlights the grain.

Series V 425 TT & V 450 TT Ex The HEINKEL Coating Centrifuge V 425 TT, is an economical solution for the coating of small parts with oil, paint, adhesive binders and the like. It spins away excess coating material optimally and it is also easy to install. For hazardous Ex zones HEINKEL has developed and built the Coating Centrifuge V 450 TT Ex. Special properties for the customer’s benefit: Economic coating of small parts with oil, lacquer, adhesive coatings etc. Optimised spinning off of excess coating material Simple installation

EWM welding consumables for MMA welding Welders can choose between different stick electrodes with different coating materials to work with: — unalloyed steels — low-alloy heat resistant steels — high alloy steels — Copper-based materials — Cladding