Cnc machine tools - Import export

CNC controlled machine with rotary indexing table and tool magazine. Automatic tool changer with HSK spindle tools. Mosts common tools used are tampico and sisal fibre brushes for bottom, bottom radius and side wall polishing.

Absolute exposed linear encoder for CNC machine tools with Siemens (DRIVE-CLIQ) , Fanuc and Mitsubishi CNC. Due to the magnetic operating principle of the SQ47, the measuring system is extremely insensitive to contamination, e.g. oil, water and dust, while at the same time providing maximum accuracy and resolution. Contactless read head design without ball bearing guide Measuring lengths: 90mm - 3.740mm Accuracy: 3+3ML/1,000 µm(p-p) Max. Resolution: 5nm Max. Response speed: 200m/min Protection class: IP67 without supplied air Interface: Siemens DriveCliQ, Fanuc, Mitsubshi Thermal expansion like steel Easy installation

Highly accurate magnetic absolute linear encoder with slim design for machine tools with Siemens, Fanuc, and Mitsubishi CNCs Easy integration in cramped installation conditions due to the slim design Insensitive to contamination such as oil, water, moisture and dust due to the magnetic operating principle Same thermal expansion behavior as steel or cast iron. Compatible with serial protocols from Fanuc, Mitsubishi and Siemens Siemens DRIVE-CLIQ version is Functional Safety certified

High-precision absolute angle encoder with flat design with integral bearing Magnetic operating principle therefore extremely insensitive Perfectly suited for applications in CNC machine tools such as rotary tables Serial interfaces for Siemens and Fanuc. Siemens version with Functional Safety certification.

Highly accurate absolute angle measuring system with flat design and integrated bearing. Magnetic operating principle therefore extremely insensitive Perfectly suited for applications in CNC machine tools such as rotary tables. With serial interfaces for Fanuc, Mitsubishi and Yaskawa CNC available.

Absolute operating principle with magnetic signal sensing via two read heads. Extremely insensitive to oil, moisture and dust due to magnetic signal sensing. Large inner diameters of 96mm or 180mm. High accuracy and resolution. Perfectly suited for applications in CNC machine tools e.g. swivel heads or rotary tables.With various serial interfaces available

CNC machine tool with 6 axis for belt grinding, polishing and belt linishing aircraft engine airfoils such as fan blades, vanes (OGVs and IGVs), steam turbine blades and gas turbine compressor blades and vanes. Extreme high precision and repeatable stock removal allows balancing of milling process to save milling time and cutter costs by maximizing milling roughness followed by MTS process.

High resolution magnetic absolute linear encoder system for CNC machine tools with robust design. The read head is guided contactless without ball bearing Measuring lengths: 70mm - 3.770mm Accuracy: 3+3ML/1.000 µm(p-p) Max. Resolution: 5nm Max. Response speed: 200m/min Extremely robust against vibration and shock Insensitive to contamination such as oil, water, moisture and dust due to the magnetic operating principle Same thermal expansion behavior as steel or cast iron machine bed Compatible with serial protocols from Fanuc, Mitsubishi and Siemens Siemens DriveCliQ version is Functional Safety certified

High precision magnetic absolute linear encoder for CNC machine tools in robust design Measuring lengths:140mm - 3.640mm Accuracy: 3+3ML/1.000 µm(p-p) or 5+5ML/1.000µm(p-p) Max. Resolution: 10nm Max. Response speed: 200m/min Extremely robust against vibration and shock Insensitive to contamination such as oil, water, moisture and dust due to the magnetic operating principle Same thermal expansion behavior as steel or cast iron machine bed Compatible with serial protocols from Fanuc, Mitsubishi and Siemens Siemens DriveCliQ version is Functional Safety certified

The SGS (Spindle Growth System) 4701 displacement measuring system is developed for high speed milling machine applications. Due to high machining speeds and the heat generated, the linear thermal expansion of the precision machine tool spindle needs to be compensated for in order to keep the tool in a defined position at all times. The SGS sensor measures the expansion of the spindle caused by thermal and centrifugal force. The measurement takes places typically on the labyrinth-ring. As well as the linear expansion, the temperature of the sensor is detected and output.These measurement values are fed into the CNC machine tool as correction values, compensating for any positioning errors.

The directly driven dividing apparatus of the TA3 series are excellent suited for the exact positioning of workpieces or, due to the high speeds, also for round machining of workpieces. The direct drive is absolutely backlash-free and ensures highest dynamics. All dividing apparatus are equipped with an automatic, pneumatically actuated clamping system. The dividing apparatus TA3G180 can be optionally equipped with an automatic hydrodehn clamping system (hydraulic expansion technology). Field of applications Rotation axis for angle positioning of work piece carriers in: Processing centers CNC - grinding machines Tool machines Laser processing machines, etc.

SIEMENS CNC and PLC automation solutions Regardless of whether you require CNC control systems for your machine tools, drive assemblies to achieve the highest performance or optimum solutions for your PLC – we should always be your first point of contact. It does not make a difference whether you are using discontinued and legacy series or the latest automation technology products from SIEMENS. With our extensive range of services consisting of general reconditioning and repairs, the exchange and sale of replacement and new parts for a variety of product ranges from SIEMENS, you will receive everything from a single source and always at fixed prices. We will also happily help you with any technical problems if any of your SIEMENS assemblies go on strike. We offer support over the phone as well as a direct on site service so that you can get your machine up and running again as quickly as possible.

Immersion Pumps Models TS12 to TS24 are suitable for CNC machine tools featuring coolant supply through the tool holder or driving spindle or equipped with internally cooled tool. These pumps are equipped with a peripheral impeller to achieve a compact high pressure unit. Series TS are suitable for filtered coolant only. To reduce pump pressure, models TS22 to TS24 are also available with an optional Y/YY (Dahlander) motor configuration for 4 pole operation at half speed. Volumetric delivery: up to 70 l/min Delivery head: up to 95 m Please contact us for delivery quantity

Three-dimensional shapes and tools implemented in steel and aluminum. Our services Moldmaking develops and manufactures tools for your products based on models, datasets and drawings. Manifold mandrels, tools for cooling water, fuel, heating and air hoses and other special applications Vulcanizing molds for air conditioning hoses with high accuracy in steel and aluminum Milling mandrels for hoses in stainless steel and aluminum Punching tools for elastomers Special production in steel, stainless steel and aluminum Turning - CNC machine CTX 420 with driven tools and Y-axis Milling - CNC machine DMU 80, five axes simultaneously

Inductor design and manufacture continues to be one of eldec’s core competences. The inductor forms the foundation of every eldec induction machine. Every inductor is specifically made-to-order for a workpiece. The basis of this is the frequency, material and power density which means that precisely that area of the workpiece is heated that should be heated. eldec heating cables are used for the heating of large components. The form of the inductor and its design are tailored to the geometry of the workpiece area it is to heat. An inductor from eldec is designed using the very latest 3-D CAD solid modelling software, manufactured on CNC machine tools and built by trained personnel with excellent training at eldec in Germany and the USA. This means that every inductor is made to measure, precise and highly accurate.

Inductor design and manufacture continues to be one of eldec’s core competences. The inductor forms the foundation of every eldec induction machine. Every inductor is specifically made-to-order for a workpiece. The basis of this is the frequency, material and power density which means that precisely that area of the workpiece is heated that should be heated. eldec heating cables are used for the heating of large components. The form of the inductor and its design are tailored to the geometry of the workpiece area it is to heat. An inductor from eldec is designed using the very latest 3-D CAD solid modelling software, manufactured on CNC machine tools and built by trained personnel with excellent training at eldec in Germany and the USA. This means that every inductor is made to measure, precise and highly accurate.

The use of filtration materials and systems in the field of industrial applications and the use of filter in the producing industries claim filter as well as filter systems on the highest degree. New fiber types with different surface modifications in a new combination, united in the innovative polymer fiber filter FIBALON®tool, offering unique and outstanding filtration results. By optimizing our developed dynamic fiber fixation DyFix® and a particle-dependent fiber geometry, we can now also offer our worldwide unique polymer fiber filter for the industrial use. For example in metal band saws to protect the pump or for the treatment of cooling lubricants and also for cutting fluids (e.g. in CNC machines) is FIBALON®tool with its highly durable special fiber combination an inexpensive alternative with improved filtration efficiency compared to conventional systems such as centrifuges or belt filter systems.