Cleaning drum - Import export

The B2 Battery drum pump is suitable for low-viscosity, aqueous to slightly viscous media, such as plasticisers, cold cleaners and lubricants. The set is suitable for dispensing small containers such as canisters or hobbocks. The pump is flexible at all times and thus conserves important resources. The set is supplied without battery and charger. * Replaceable, powerful rechargeable battery with Li-Ion * Battery life 35 min at maximum speed * 1 battery charge empties approx. 12 x 200 litre containers Features & benefits * BLDC motor with high efficiency up to 70% * Infinitely variable * Long battery life * Automatic switch-off in case of overload * Sophisticated quick-release fastener * The max. flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20° C. The measurement is taken at the pump's discharge nozzle, without hose, nozzle or flow meter.

With the Drum pump F/FP 425 there is less than 0.05 l residual amount left in a 200 l drum, so maximum 0.02 %. The pump has an integrated backflow valve that is easy to close before taking the pump out of the container. Thus the backflow of the medium in the pump is prevented. This makes optimum use of especially expensive media possible and saves additional cleaning and disposal costs when handling problematic media. The pump is available in stainless steel, polypropylene and hastelloy C. In stainless steel and hastelloy C the pump F/FP 425 can also be used in hazardous areas. Benefits: - Optimal residual emptying with e.g. less than 0.05 l residual amount left in 200 l drum - Two adjusting levers to easily close the backflow stop - No tilting to totally empty the drum - Reduction of cleaning and waste disposal costs - No loss of medium when taking the pump from drum to drum - Optimal use of fluids

The Pump Set is suitable for thin, flammable and inflammable liquids and hydrocarbons. Perfectly suited for withdrawing or transferring explosive media and solvents. * Optionally available with Ex - plug * Pump tube equipped with Lutz original hand wheel * Suitable for Drum emptying alternative fuels, oils, flammable liquids Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimised Drum emptying with a remaining quantity of approx. 0.1 litres * No leakage if the pumping station is tilted or moved * Maximum product utilization with reduced drum cleaning and disposal rates * Approved according to ATEX directive 2014/34/EU, category 1/2

INOX® Brake Cleaner is a highly effective cleaning agent for drum and disc brakes, brake linings and pads, clutch linings and pressure plates, as well as all parts in and around the motor vehicle which are contaminated with oil, grease, etc. Due to the high proportion of active ingredients, an intensive and fast-acting cleaning is achieved. No residues remain. It is not corrosive and generally does not attack rubber and plastics. However, due to the variety of plastics on the market, a compatibility test is recommended.

The Pump Set is suitable for thin-bodied, flammable and highly inflammable hydrocarbons. Perfectly suited for the withdrawal or decanting of solvents. * Media examples: Ethanol, petrol, butanol, isopropanol, kerosene, methanol and petroleum.etc. * Pump tube equipped with Lutz original hand wheel * Suitable for Drum emptying alternative fuels, oils, flammable liquids Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimised Drum emptying with a remaining quantity of approx. 0.1 litres * No leakage if the pumping station is tilted or moved * Maximum product utilization with reduced drum cleaning and disposal rates * Approved according to ATEX directive 2014/34/EU, category 1/2

The carrying frame prevents belt misalignment and guarantees protection of the belt edges. As the carrying frames only function efficiently when the drum casing is clean, they are equipped and delivered with dirt repellent 60° shore soft rubber. Our carrying frames can be used with both normal and reversing conveyor belts. Mode of operation When the conveyor belt is running straight, the axle through the roller casing forms an angle of 90° to the direction of movement of the belt. When the belt drifts, the roller casing moves, due to the dead weight of the belt, so that a forward motion occurs which brings the belt back to its normal position. The roller casing returns to its normal position as soon as the corrective procedure is completed. The mechanics of the movement are rendered possible due to a complex ball joint in the centre of the roller as well as the position of the axle in relation to the conveyor belt being less than 90°.

Regular rollers prevent belt misalignment and guarantee protection of the belt edges. As the regular rollers only function efficiently when the drum casing is clean, the rollers are equipped and delivered with dirt repellent 60° shore soft rubber. Our regular rollers can be used with both normal and reversing conveyor belts. Mode of operation When the conveyor belt is running straight, the axle through the roller casing forms an angle of 90° to the direction of movement of the belt. When the belt drifts, the roller casing moves, due to the dead weight of the belt, so that a forward motion occurs which brings the belt back to its normal position. The roller casing returns to its normal position as soon as the corrective procedure is completed. The mechanics of the movement are rendered possible due to a complex ball joint in the centre of the roller as well as the position of the axle in relation to the conveyor belt being less than 90°.

2.1 / 01 Lidded drum with stackable base Lidded drums with stackable base 2.1 / 02 Lidded drum with flat base and base ring 2.1/02 Lidded drum with flat base and base ring 2.1 / 03 Lidded drum with flat stackable base Lidded drums with flat stackable base 2.1 / 04 Lidded drum with torospherical base Lidded drums with torospherical base 2.1 / 05 Lidded drums with lateral base outlet Lidded drums with lateral base outlet 2.1 / 06 Ultra Clean Drum Ultra Clean Drum

Step 1: Filling Insert plunger Fill product into drum Step 2: Storage Storage Transportation to filling line Step 3: Preperation Special emptying lid placed over drum Step 4: Emptying Drum emptying through the product piping to the filling line Step 5: Ready for a new load The drum is clean The drum can be filled again

Step 1: Filling Insert plunger Fill product into drum Step 2: Storage Storage Transportation to filling line Step 3: Preperation Use pallet truck to move drum into drum-emptying stand Lower the cover with the handwheel Step 4: Emptying Drum emptying through the product piping to the filling line Step 5: Ready for a new load The drum is 100 % empty It is easy to clean The drum can then be filled again

Too much product loss when emptying drums, complicated cleaning of pump and container systems, high handling costs and problems with the stringent hygiene requirements: a daily headache for companies working with viscous products. Efficient drum-emptying systems by Müller have long set the standard in a diversity of applications in many industries. Your benefits: GMP compliant system needs little space and is safe and simple to operate different seal qualities available Drum-emptying system For creams, ointments, adhesives, pastes, paints 100 % emptying 30 - 1000 liters