Chamfering machines - Import export

The SMA 30-A series is available in an electrical or compressed-air operated design. The machine is designed for handling steel, aluminum, copper and plastics. A chamfer width of up to 8 mm is possible in NE metals and a chamfer width of up to 6mm in steel. In addition to this, a radius processing of 1.2mm to 6mm is feasible. The stunning and patented 8 or 16 cutting turning plate system guarantees long service life, best surface qualities and efficient working. The electrical design of the SMA 30 is equipped with a speed control and should be preferably used for stainless steel processing. The cutter heads are available for chamfer angles 30°, 45° and 60°. The processing of drill holes is already possible starting at a diameter of >28mm. For tight contours, long holes and bores, a single-cutting cutter head with a fitting guide roller is available, Ø10mm to Ø20mm depending on application.

The SMA 20-A series is available in an electrical or compressed-air operated design. The machine is designed for handling steel, aluminum, copper and plastics. A chamfer width of up to 7 mm is possible in NE metals and a chamfer width of up to 4mm in steel. In addition to this, a radius processing of 1.2mm and 2.5mm is feasible. The stunning and patented 8 or 16 cutting turning plate system guarantees long service life, best surface qualities and efficient working. The processing of drill holes is already possible starting at a diameter of >20mm.

The ASO 313 is for the chamfering and rounding off of workpieces with straight edges. The edge break with R2 - R4 is only possible by replacing the turning plate. A secure and simple handling is possible through the prismatic guide and additional handle. This helps us achieve a particularly clean and vibration-free chamfer quality. The compact construction and the low weight offer wonderful ergonomics. The machine is equipped with a powerful and reliable pneumatic drive. The chamfer angle can be gradually set between 15 - 45°. Advantages: For 15 - 45° chamfers and for rounding edges Secure handling through prismatic guide and handle Reliable electric motor Insert milling cutter for efficient chamfering

The ASO 312 is for the chamfering and rounding off of workpieces with straight edges. The edge break with R2 - R4 is only possible by replacing the turning plate. A secure and simple handling is possible through the prismatic guide and additional handle. This helps us achieve a particularly clean and vibration-free chamfer quality. The compact construction and the low weight offer wonderful ergonomics. The machine is equipped with a powerful and reliable pneumatic drive. The chamfer angle can be gradually set between 15 - 45°.

The ASO 600-ASL edge and contour deburring machine is designed for chamfering small to medium-sized workpieces. The refined machine features, such as the folding table, the tool-free spindle locking and the height adjustment guide for tool change convince completely in their performance. The durable steel casing, the wear-resistant and sanded workplate with extraction socket and speed regulation round off the total package. The speed range from 9,000-21,000 rpm is ideal for use of NE-metals up to high-alloy materials. Thanks to the brushless motor the machine is perfect for continuous operation. Our versatile tool range includes different VHM milling cutters and CBN or diamond grinding pencils. The VHM milling cutters are available for the processing of chamfer angles and radii. Ball bearings with Ø3, Ø4, Ø5 or Ø6mm are used for contour processing with the VHM milling cutters. Tapered contour chamfers are used in combination with guide fingers or stop rulers.

The sturdy and easy chamfering machine is designed for deburring and chamfering of small to large workpieces from 2 mm thickness. The sturdy cast iron casing, the hardened and sanded guide rails, the speed regulation and the integrated chip box convince in every regard. Thanks to the optimised interplay of cutter head and cutting inserts, the machine ensures clatter-free, clean and constant chamfering. A chamfer width of up to 10 mm is possible in NE metals and a chamfer width of up to 5mm in steel. Hardened workpieces, HSS and hard metal materials can be processed through optional CBN and diamond grinding discs. For longer workpieces or serial part production, we recommend optimizing the feed unit with pressing pressure, surface quality, feed speed and service life of tools. The machine can be installed on an undercarriage for flexible use in a workshop.

The sturdy and easy chamfering machine is designed for deburring and chamfering of small to large workpieces from 1 mm thickness. The machine generates a perfect chamfering quality thanks to the optimized interaction between the cutter head and cutting inserts - like sanded. In NE metals and steel, a chamfer width up to 10mm is possible. The ASO160-M is ideal for processing steel and aluminum. The ASO 160-MSL design has speed regulation that is very useful for the processing of aluminum or stainless steel. For longer workpieces or serial part production, we recommend optimizing the feed unit with pressing pressure, surface quality, feed speed and service life of tools. The machine can be installed on an undercarriage for flexible use in a workshop, which simultaneously serves as a chip box.

The FS 5 is a sturdy and extremely cost-effective chamfering machine with cutter head and cutting inserts. Straight edges of cube-shaped workpieces can be easily chamfered. It is designed for deburring and chamfering small workpieces starting with a thickness of 3 mm. The sturdy casing, the sanded guide rails and the integrated swarf boxes convince in every regard. The V-prism is foldable for changing the reversible cemented carbide inserts. Thanks to the optimised interplay of cutter head and cutting inserts, the machine ensures clatter-free, clean and constant chamfering. The chamfer setting is made through a knurled handwheel. A chamfer width of up to 5 mm is possible in NE metals and a chamfer width of up to 3mm in steel. The machine has a switch-on duration of 10 - 30%/h.

The small and compact edge processing machine with sliding carriage is designed for chamfering and grinding small to medium-sized workpieces starting with a thickness of 1 mm. The light aluminium casing, the wear-resistant and sanded guide rails, the speed regulation and the optionally available extraction sockets convince in every regard. The sliding carriage protects the workpiece surface of components that are sensitive to scratches. The workpiece is inserted in the V-prism from the sliding carriage. The processing is performed by pushing the sliding carriage with workpiece over the tool. The travel path is 210mm. The sliding carriage can be locked in place for longer components. Our variety of high-quality solid carbide chamfers provide for vibration-free, clean and constant chamfering quality depending on the material. A chamfer width of up to 4 mm is possible in NE metals and a chamfer width of up to 2mm in steel.

AF 165 is a tabletop device for the lightning-fast and efficient removal burrs. Faceting and deburring machine with fixed angle of 45° and gradually set chamfer width for all metals. Its special area includes the removal of saw burrs and roughing burrs so that workpieces can be further processed and are safe to use. Fast, cost efficient edge grinding is achieved by durable flap disks, CBN- or diamond grinding wheels. Advantages: Can be used for steels, aluminium, brass, copper, plastics, from soft plastics to acrylic glass, wood and much more. For hardened steels CBN wheels For hard metals Diamond discs Uncomplicated tool change Easy operation

The small and compact chamfering machine is designed for chamfering small to medium-sized workpieces. The light aluminum casing, the wear-resistant and sanded work plate, the optional speed regulation and extraction sockets convince in every regard. The Speedy Contour is available in the type 270 and 320 designs, this refers to the able plate size. Both versions are available with and without speed regulation. For high-alloy materials, the speed range can be adjusted for speed-regulated machines from 10,000 to 30,000 rpm, through a technical change, to 2,800 to 7,400 rpm, and for machines without speed regulation from 20,000 rpm to 5,100 rpm. Thanks to the brushless motor the machine is perfect for continuous operation. Our versatile tool range includes different VHM milling cutters and CBN or diamond grinding pencils. The VHM milling cutters are available for the processing of chamfer angles and radii.

BKE 550 is a table or permanent device for extremely fast, double-sided deburring of sheet parts from all metals (including stainless steel), up to approx. 5 mm sheet-metal thickness, in a single step. The BKE 550 sheet deburring machine is for the highest demands in effective, fast and safe deburring. The double-sided deburring of sheets is guaranteed through the machine construction with two finned grounding wheels, which are installed directly on motor shafts that run opposite. Smaller and handy workpieces can be placed and processed with a horizontal table. Large metal sheets and strips can also be deburred with a vertical table. Advantages: Deburring of sheets on both sides Sheet thickness 0-4mm Can be used for small sheets in horizontal operation and large sheets in vertical operation Flap wheels for steel or stainless steel with different grit sizes

The KKE edge and contour deburring machines are designed for chamfering small to medium-sized workpieces. The durable steel casing, the wear-resistant and sanded work plate and the speed regulation convince in every regard. The machine is available in KKE1 and KKE2 designs. The KKE2 includes a prismatic guide with extraction socket in the scope of delivery. Our versatile tool range includes different VHM milling cutters and CBN or diamond grinding pencils. The VHM milling cutters are available for the processing of chamfer angles and radii. Ball bearings with Ø3, Ø4, Ø5 or Ø6mm are used for contour processing with the VHM milling cutters. Tapered contour chamfers are used in combination with guide fingers or stop rulers. A chamfer width of up to 3mm is possible in NE metals and steels and up to 2mm in stainless steel. Radii processing is feasible up to R3. We recommend an industrial vacuum with automatic switch-on for the KKE2 so that cleanliness at the workplace can be guaranteed.

The ASO 310 is used for deburring and rounding off edges on workpieces made of steel, stainless steel, aluminum and other materials. With the standard ball bearing, it is suitable for processing drill holes and openings starting with an internal diameter of 12 mm and a sheet thickness >8mm. With the optionally available stop collar for thin sheets, drill holes and internal diameters starting at 14 mm and a sheet thickness of >2mm can be processed. The edge break with R1 or R2 is only possible in combination with the stop collar for thin sheets. The compact construction and the low weight offer wonderful ergonomics. The machine is equipped with a powerful and reliable pneumatic drive. The chamfer size can be set through the rotary plate.

With its placement prism on wheels, the ASO 760 is ideal for welded seam preparation for straight and large workpieces. Different welding chamfers can be produced through the angle setting from 0 - 60°. The two-disc chamfer with the wonderful and patented 8 cutting turning plate system guarantees long service life, best surface qualities and efficient working. The machine is designed for handling steel, aluminum, copper and plastics. A chamfer width of up to 18mm is possible here. Round materials or tubes starting with an external diameter of 150mm can be chamfered through an optionally available pipe chamfering device. Advantages: Processing chamfers on sheet metal, containers, outer edges Angle adjustment from 0 - 60° Up to 8-times usable turning cutting plates Sturdy and durable machine Good guide through two-hand operation Optional chamfering device starting at Ø150mm Controlled flying chips

The SMA 60 is available in an electrical, compressed-air or high-frequency design. The machine is designed for handling steel, aluminum, copper and plastics. In NE metals and steel up with a tensile strength of 600N/mm², a chamfer width of up to 30mm is possible. In addition to this, a radius processing of 1.2mm to 15mm is feasible. The stunning and patented 8 or 16 cutting turning plate system guarantees long service life, best surface qualities and efficient working. The cutter heads are available for chamfer angles between 0 - 80°. The processing of drill holes is already possible starting at a diameter of >28mm. Advantages: Booster technology for a higher material removal rate Spring technology for higher service life of cutting inserts Processing chamfers, radii on sheets, containers, inner and outer edges, contours and drill holes Replaceable cutter head for different chamfer angles 0 - 80° Easy and vibration-free work

The SMA 40-A series is available in an electrical or compressed-air operated design. The machine is designed for handling steel, aluminum, copper and plastics. A chamfer width of up to 16 mm is possible in NE metals and a chamfer width of up to 12mm in steel. In addition to this, a radius processing of 1.2mm to 8mm is feasible. The stunning and patented 8 or 16 cutting turning plate system guarantees long service life, best surface qualities and efficient working. The electrical design of the SMA 40 is equipped with a speed control and should be preferably used for stainless steel processing. The cutter heads are available for chamfer angles between 0 - 80°. The processing of drill holes is already possible starting at a diameter of >28mm. For tight contours, long holes and bores, a single-cutting cutter head with a fitting guide roller is available, Ø10mm to Ø20mm depending on application.

Wire Belt’s innovative line of Clean-Sweep™ sprockets are specifically designed to deflect the amount of product buildup accumulated on your conveyor’s drive. This means that there is less of a chance for product loss & carryout, belt skipping due to product buildup, and belt breakage due to incorrect contact with the sprocket teeth. Clean-Sweep™ sprocket’s tooth chamfer is machined to reduce drive friction and can lengthen belt life.

After chamfering with the ChamferCut technology, no additional processing is necessary. No need for a second cut, often required during the deformation-based deburring process for the removal of material build up. With the chamfering process, the exact chamfer form is cut. In contrast to deformation-based processes, the material structure is not affected. Thus, there is no negative impact on finishing after heat treatment (e. g. honing). The precision of this LMT Fette engineered process is undisputed. The quality of such chamfers defines a new standard – with maximum repetitive accuracy. The combination of these process benefits along with low tool costs makes the ChamferCut the most economic deburring and chamfering process on the market. Advantages: - 100% chamfer quality - Chamfer correction possible via machine control - High efficiency - Simple, cost-effective reconditioning - Module range 0.8 – 42

The KKF3-SL, a universal chamfering and contour milling machine, has a measuring head attachment. Tools with a shaft diameter from Ø6-12 mm can be clamped in the milling cutter support. Our versatile tool range includes different VHM milling cutters and blade heads. The VHM milling cutters are available for the processing of chamfer angles and radii. Ball bearings with Ø6 or Ø8mm are used for contour processing with the VHM milling cutters. Tapered contour chamfers are used in combination with optional guide fingers or stop rulers. The use of cutter heads with cutting inserts and guide ball bearings starting at Ø10mm permit maximum efficiency. A guide prism with VHM shaft chamfering can optionally be used for straight edges. The exact chamfer setting is performed through a micrometer screw. A chamfer width of up to 6mm at 45° is possible in steel. In NE metals, significantly larger chamfers are possible depending on the tool and angle.

The KKF4-SL, a universal chamfering and contour milling machine, has an ER collet chuck. Tools with a shaft diameter from Ø6-12 mm can be clamped. Our versatile tool range includes different VHM milling cutters and blade heads. The VHM milling cutters are available for the processing of chamfer angles and radii. Ball bearings with Ø6 or Ø8mm are used for contour processing with the VHM milling cutters. Tapered contour chamfers are used in combination with guide fingers or stop rulers. The use of cutter heads with cutting inserts and guide ball bearings starting at Ø10mm permit maximum efficiency. A guide prism with VHM shaft chamfering can be used for straight edges. The exact chamfer setting is performed through a micrometer screw. A chamfer width of up to 4mm at 45° is possible in steel. In NE metals, significantly larger chamfers are possible depending on the tool and angle. The KKF4-SL has speed regulation that is very useful for the processing of aluminum or stainless steel.

The automatic recess chamfering machine ASO 910 is for welded seam treatment of, for example, duplex steel. The recess chamfering or resetting of cladding is mastered excellently by the edge chamfering machine. The attachment of chamfers on the top edge of the workpiece is possible up to 65mm. Thanks to the gradual angle adjustment from 90° - 75°, clean transitions are created between two workpieces with different thicknesses. The machine is very durable and shows its’ strength in every material through their sturdy construction. Extremely high tool service life can be achieved with the low-speed chamfering. Sheet thickness started at 8mm can be processed. The front, top and/or bottom side can be processed in one step through a special shape chamfer. Cavities in the front can be chamfered using the disc groove cutter. Advantages: Easy to adjust to material thickness, chamfer angle and working height Cutter head can be set in Z and X-axis No thermal change to the material

The automatic weld-chamfering machines from the ASO 930 series are for stationary and portable use in weld seam preparation. The attachment of large welded chamfers on the workpiece bottom edge up to a chamfer length of 74mm can be performed by the machine effortlessly without any thermal change to the material. V, X, K or Y seams can be prepared thanks to the gradual angle adjustment from 0° - 75°. The machines are very durable and show their strength in every material through their sturdy construction. Extremely high tool service life can be achieved with the low-speed chamfering. Sheet thickness started at 8mm can be processed. Smaller workpieces can be processed manually. Advantages: Easy to adjust to material thickness, chamfer angle and working height No thermal change to the material V-, X-, K-, I- or Y- seams possible Very long operating life and cutting performance Gradual feed adjustment depending on material from 0 - 1.

The automatic weld chamfering machine ASO 920 is for portable use in weld seam preparation. The attachment of large welded chamfers on the workpiece upper edge up to a chamfer length of 90mm can be performed by the machine effortlessly without any thermal change to the material, because the heat dissipation occurs through the chip. V, X, K, U or Y seams can be prepared thanks to the gradual angle adjustment from 0° - 30°. The highlight here is the machining preparation of a tulip seam. The machine is very durable and shows its’ strength in every material through their sturdy construction. Extremely high tool service life can be achieved with the low-speed chamfering. Sheet thickness started at 8mm can be processed. Advantages: Easy to adjust to material thickness, chamfer angle and working height Cutter head can be set in Z and X-axis No change to material properties, through heat dissipation via chip V-, X-, K-, U- or Y- seams possible

The automatic weld-chamfering machines from the ASO 900 series are for stationary and portable use in weld seam preparation. The attachment of large welded chamfers on the workpiece upper edge up to a chamfer length of 53mm can be performed by the machine effortlessly without any thermal change to the material, because the heat dissipation occurs through the chip. V, X, K or Y seams can be prepared thanks to the gradual angle adjustment from 15° - 80°. The machines are very durable and show their strength in every material through their sturdy construction. Extremely high tool service life can be achieved with the low-speed chamfering. Sheet thickness started at 8mm can be processed. Smaller workpieces can be processed manually. Advantages: Easy to adjust to material thickness, chamfer angle and working height No change to material properties, through heat dissipation via chip V-, X-, K- or Y- seams possible

The automatic bevelling machine CHP 21G is designed for the stationary and portable use in weld seam preparation. A cutting wheel shears off the edge in a low-noise and dust-free way, leaving a rough chamfer. It is extremely robust and suitable for continuous operation. It delivers consistent and high-quality bevels in the sheet metal welding preparation process.

The weld edge forming/milling machines shear the edge with the help of a cutting wheel, completely self-propelled, noiselessly, and dust-free, leaving a rough bevel. They produce perfect welding edges with the best price-performance ratio. They can chamfer plates and pipes, including large diameters, as well as small parts and pipes with low thickness.

The ASO 300 is used for deburring and rounding off edges on workpieces made of steel, stainless steel, aluminum and other materials. It is suitable for processing drill holes and openings starting with an internal diameter of 7.0 mm. The compact construction and the low weight offer wonderful ergonomics. The machine is equipped with a powerful and reliable pneumatic drive. The chamfer size can be set precisely through a scale. Advantages: For 45° chamfers and for rounding edges Bores starting at Ø = 7 mm can be processed Can be used for straight edged and contours Reliable compressed air motor Compact and light (500g) construction Insert milling cutter for efficient chamfering One-handed operation Safety lever valve