Centrifugal filters - Import export

Type: FO 500 Manufacturer: Heinkel Description: Inverting filter centrifuge Equipment: Frame, Bowl, Motor, Valves, Oscillating elements, Controls, Manual and spare parts list

Type: HF 800.1 Manufacturer: Heinkel Description: Inverting filter centrifuge Equipment: Frame, Bowl, Motor, Valves, Oscillating elements, Controls, Manual and spare parts list

Type: HF 800 Manufacturer: Heinkel Description: Inverting filter centrifuge Equipment: Frame, Bowl, Motor, Valves, Oscillating elements, Controls, Manual and spare parts list

Type: HF 600.1 Manufacturer: Heinkel Description: Inverting filter centrifuge Equipment: Frame, Bowl, Motor, Valves, Oscillating elements, Controls, Manual and spare parts list

Type: HF 600 Manufacturer: Heinkel Description: Inverting filter centrifuge Equipment: Frame, Bowl, Motor, Valves, Oscillating elements, Controls, Manual and spare parts list

Type: HF 450.1 Manufacturer: Heinkel Description: Inverting filter centrifuge Equipment: Frame, Bowl, Motor, Valves, Oscillating elements, Controls, Manual and spare parts list

Type: HF 300.1 Manufacturer: Heinkel Description: Inverting filter centrifuge Equipment: Frame, Bowl, Motor, Valves, Oscillating elements, Controls, Manual and spare parts list

Type: HF 300 Manufacturer: Heinkel Description: Inverting filter centrifuge Equipment: Frame, Bowl, Motor, Valves, Oscillating elements, Controls, Manual and spare parts list

Type: HF 1300.1 Manufacturer: Heinkel Description: Inverting filter centrifuge Equipment: Frame, Bowl, Motor, Valves, Oscillating elements, Controls, Manual and spare parts list

Type: HF 1300 Manufacturer: Heinkel Description: Inverting filter centrifuge Equipment: Frame, Bowl, Motor, Valves, Oscillating elements, Controls, Manual and spare parts list

Type: HF 1000.1 Manufacturer: Heinkel Description: Inverting filter centrifuge Equipment: Frame, Bowl, Motor, Valves, Oscillating elements, Controls, Manual and spare parts list

Combination Braid Made of PTFE and Para-Aramid Fiber with Run-In Lubricant­ Practical useful application data: max. temperature: +200 °C max. pressure centrifugal pumps: 20 bar max. velocity centrifugal pumps: 15 m/s Characteristics Universal packing for abrasive media which need a reinforced, wear resistant and form stable packing Shaft protecting through good coefficient of fiction No contamination of media Operating range Pressure [p max]: 25 bar, Velocity [v max]: 20 m/s Pressure [p max]: 500 bar, Velocity [v max]: 2 m/s Pressure [p max]: 250 bar Temperature: t = -100… +280 °C pH: 2 - 12 Density: 1.45 g/cm³ Practical useful application data: max. temperature: +200 °C max. pressure centrifugal pumps: 20 bar max. velocity centrifugal pumps: 15 m/s Main application Centrifugal pumps Mixer Kneader Agitators Filter Extruder Refiner Suitable for Chemical industry Pulp and paper industry Form of delivery This packing can be manufactured from 6 to 40 mm square as well as in...

100% PTFE - Fiber with special PTFE Dispersion and FDA conform Siliconoil impregnated Characteristics Highest chemical resistance for a packing in rotating equipment Pliable, easily compressible packing Self lubricating, dry running capability Shaft protecting surface hardness of HRC 25 is sufficient Non ageing Operating range Pressure [p max]: 25 bar, Velocity [v max]: 2 m/s Pressure [p max]: 250 bar, Velocity [v max]: 1 m/s Pressure [p max]: 500 bar Temperature: t = -100… +280 °C pH: 0 - 14 Density: 1.70 g/cm³ Main application Agitators Mixer Refiner Filter Slow speed Centrifugal pumps Valves, Gate valves Metering valves Suitable for Pulp and paper industry Chemical industry Pharmaceutical industry Food industry Approvals FDA conformity EN 1935:2004 in accordance with EN 10/2011 Form of delivery This packing can be manufactured from 4 to 40 mm square as well as in intermediate, inch sizes and special measurements. 04 - 09 mm on 1 kg spool 10 - 15 mm on 2,5 kg spool 16 -...

PTFE Fiber with PTFE Blocking Agent and Silicone Free Run-In Lubricant Characteristics Highest chemical resistance for a packing in rotating equipment Pliable, easily compressible packing Self lubricating, dry running capability Shaft protecting surface hardness of HRC 25 is sufficient Non ageing Operating range Pressure [p max]: 15 bar, Velocity [v max]: 10 m/s Pressure [p max]: 100 bar, Velocity [v max]: 1.5 m/s Pressure [p max]: 100 bar Temperature: t = -50… +280 °C pH: 0 - 14 Density: 1.70 g/cm³ Main application Agitators Mixer Refiner Filter Slow speed Centrifugal pumps Valves, Gate valves Metering valves Suitable for Chemical industry General industry Variant S6SI with Food certification EG 1935:2004 in accordance with EU 10/2011 FDA conformity Form of delivery This packing can be manufactured from 3 to 40 mm square as well as in intermediate, inch sizes and special measurements. 03 - 09 mm on 1 kg spool 10 - 15 mm on 2,5 kg spool 16 - 25 mm on 5 kg spool Special...

Combination braid of ePTFE Yarn incorporated with Graphite, Meta-Aramid Fibers and special impregnation Practical useful application data: max. temperature: +200 °C Characteristics Excellent Standardisation possibilities High Cross Sectional density, yet still elastic and flexible Suitable for use with hardening and crystallizing products Displays reduced wear through special running track reinforcement Unique formulation impregnation improves flexibility, ensures packing will not harden Provides excellent chemical resistance Recommended shaft surface hardness: HRC 35 Operating range Pressure [p max]: 25 bar, Velocity [v max]: 20 m/s Pressure [p max]: 150 bar, Velocity [v max]: 2 m/s Pressure [p max]: 150 bar Temperature: t = -100… +280 °C pH: 1 - 13 Density: 1.50 g/cm³ Practical useful application data: max. temperature: +200 °C Main application Centrifugal pumps Mixer Agitators Fittings Filter Suitable for Pulp and paper industry Chemical industry Form of delivery This...

Combination Braid of ePTFE with incorporated Graphite and PTFE Fiber Corner Reinforcement with Special Blocking compound Practical useful application data: max. temperature: +200 °C max. pressure centrifugal pumps: 20 bar Characteristics High cross section density and structural stability, elastic and pliable Special Impregnation prevents hardening of packing Improved friction properties minimizing shaft or sleeve wear Shaft hardness HRC 25 is sufficient Resistant against solvents, acids and crystallizing media Operating range Pressure [p max]: 25 bar, Velocity [v max]: 20 m/s Pressure [p max]: 250 bar, Velocity [v max]: 2 m/s Pressure [p max]: 250 bar Temperature: t = -100… +280 °C pH: 0 - 14 Density: 1.60 g/cm³ Practical useful application data: max. temperature: +200 °C max. pressure centrifugal pumps: 20 bar Main application Centrifugal pumps Mixer Agitators Autoclave Filter Refiner Kneader Paddle dryer Suitable for Pulp and paper industry Chemical industry Sugar...

Combination Braid of ePTFE with incorporated Graphite and Para-Aramid Fiber Corner Reinforcement with Special Blocking compound Practical useful application data: max. temperature: +200 °C Characteristics Reinforced packing with reduced wear through improvedheat conductivity Recommended shaft surface hardness: HRC 50 Safe universal packing for abrasive media Extrusion resistant, ideal for worn equipment with bigger gap width Development: Better sealability of stuffing box Operating range Pressure [p max]: 25 bar, Velocity [v max]: 20 m/s Pressure [p max]: 500 bar, Velocity [v max]: 3 m/s Pressure [p max]: 250 bar Temperature: t = -100… +280 °C pH: 2 - 12 Density: 1.50 g/cm³ Practical useful application data: max. temperature: +200 °C Main application Centrifugal pumps Mixer Agitators Autoclave Filter Refiner Kneader Paddle dryer Suitable for Pulp and paper industry Sugar industry Waste water technology Chemical industry Variant Square shape S12K Plunger with ParaAramid-Corner...

Meta-Aramid Fiber with PTFE Blocking Agent and Run-In Lubricant Characteristics Wear resistant, universal packing for applications with abrasive content High cross section density and structural stability, yet elastic and pliable Low friction, low shaft wear (HRC 45 shaft shaft surface hardness is sufficient) Clean packing, no contamination of media Operating range Pressure [p max]: 25 bar, Velocity [v max]: 20 m/s Pressure [p max]: 100 bar, Velocity [v max]: 1.5 m/s Pressure [p max]: 100 bar Temperature: t = -100… +280 °C pH: 1 - 13 Density: 1.40 g/cm³ Main application Centrifugal pumps Mixer Agitators Autoclave Filter Refiner Kneader Paddle dryer Suitable for Pulp and paper industry Sugar industry Waste water technology Form of delivery This packing can be manufactured in dimensions from 10 to 40 mm as well as in intermediate, inch sizes and special measurements. Available from 4 to 9 mm in square X-Section. 04 - 09 mm on 1kg spool 10 - 15 mm on 2,5 kg spool 16 - 25 mm on...

Braid of ePTFE yarn with Incorporated Graphite and Run-In Lubricant Characteristics Excellent heat conductivity Maximum protection of shaft against wear (HRC 25 is sufficient) Extended MTBF Easy and safe installation and handling No ageing process Operating range Pressure [p max]: 25 bar, Velocity [v max]: 25 m/s Pressure [p max]: 250 bar, Velocity [v max]: 2 m/s Pressure [p max]: 100 bar Temperature: t = -100… +280 °C pH: 0 - 14 Density: 1.50 g/cm³ Main application Centrifugal pumps Mixer Agitators Autoclave Filter Refiner Kneader Paddle dryer Vacuum pumps Suitable for Universal use Waste water technology Acids Alkaline solutions Oil and grease Form of delivery This packing can be manufactured in dimensions from 10 to 40 mm as well as in intermediate, inch sizes and special measurements. Available from 4 to 9 mm in square X-Section as Style P1P. 04 - 09 mm on 1kg spool 10 - 15 mm on 2,5 kg spool 16 - 25 mm on 5 kg spool Special length, pre-cut or die formed rings on...

Hybrid braid in W-Profile made of heat conductive ePTFE Yarn with Meta-Aramid fiber reinforcement and Run-In lubricant Characteristics Clean packing with ultimate heat conductivity for abrasive products in pumps and other rotating equipment. Recommended shaft surface hardness: HRC 35 Porosity filling coating increases density and protects the packing in crystallizing mediums. W-Profile Reinforcement reduces shaft wear Operating range Pressure [p max]: 20 bar, Velocity [v max]: 20 m/s Pressure [p max]: 100 bar, Velocity [v max]: 2 m/s Pressure [p max]: 100 bar Temperature: t = -100… +280 °C pH: 1 - 13 Density: 1.55 g/cm³ Main application Centrifugal pumps Mixer Agitators Kneader Filter Suitable for Pulp and paper industry Chemical industry Power plant technology Waste water technology Applications with abrasive products and when white packing is required Form of delivery This packing can be manufactured from 4 to 40 mm square as well as in intermediate, inch sizes and special...

Combination Braid of ePTFE with Incorporated Graphite and Para-Aramid Fiber Surface reinforcement with Run-In Lubricant Practical useful application data: max. temperature: +200 °C max. pressure centrifugal pumps: 20 bar Characteristics Even and reduced shaft surface wear Excellent heat conductivity Recommended shaft surface hardness: HRC 45 Safe and universal packing with abrasive media Operating range Pressure [p max]: 25 bar, Velocity [v max]: 20 m/s Pressure [p max]: 250 bar, Velocity [v max]: 2 m/s Pressure [p max]: 150 bar Temperature: t = -100… +280 °C pH: 2 - 12 Density: 1.45 g/cm³ Practical useful application data: max. temperature: +200 °C max. pressure centrifugal pumps: 20 bar Main application Centrifugal pumps Mixer Kneader Agitators Filter Refiner Suitable for Chemical industry Pulp and paper industry Waste water technology Variant S12K Plunger with Para-Aramid Cornerreinforcement, available 6 mm and above Form of delivery This packing can be manufactured from...

Polyimid Fiber with PTFE Impregnation and Silicone Run-In Lubricant Practical useful application data: max. temperature: +180 °C High fatigue strength and flexibility Good acid resistance High cross section density through PTFE blocking agent, good for crystallizing media Recommended shaft surface hardness: HRC 35 Good pliability, therefore perfect adaption of uneven shaft surfaces Operating range Pressure [p max]: 20 bar, Velocity [v max]: 15 m/s Pressure [p max]: 60 bar, Velocity [v max]: 2 m/s Pressure [p max]: 100 bar Temperature: t = -100… +280 °C pH: 0 - 12 Density: 1.30 g/cm³ Practical useful application data: max. temperature: +180 °C Main application Centrifugal pumps Mixer Kneader Agitators Filter Extruder Refiner Suitable for Chemical industry Sugar industry Pulp and paper industry Mining Form of delivery This packing can be manufactured from 4 to 40 mm square as well as in intermediate, inch sizes and special measurements. 04 - 09 mm on 1 kg spool 10 - 15 mm on...

Synthetic Fiber with PTFE Impregnation and siliconfree dynamic Run in Lubricant Practical useful application data: max. temperature: +180 °C Characteristics High fatigue strength and flexibility Good acid resistance (e. g. hydrofluoric acid 15 % / 50 °C) High cross section density through PTFE blocking agent, good for crystallizing media Recommended shaft surface hardness: HRC 35 Good pliability, therefore perfect adaption of uneven shaft surfaces Operating range Pressure [p max]: 20 bar, Velocity [v max]: 15 m/s Pressure [p max]: 60 bar, Velocity [v max]: 2 m/s Pressure [p max]: 100 bar Temperature: t = -50… +280 °C pH: 1 - 13 Density: 1.35 g/cm³ Practical useful application data: max. temperature: +180 °C Main application Centrifugal pumps Mixer Kneader Agitators Filter Extruder Refiner Suitable for Chemical industry Sugar industry Pulp and paper industry Mining Form of delivery This packing can be manufactured from 4 to 40 mm square as well as in intermediate, inch sizes...

Para-Aramid Fiber Packing with PTFE Impregnation and Run-In Lubricant Practical useful application data: max. temperature: +200 °C Characteristics Volume stable, pressure stable High cross section density through PTFE blocking agent, safety against penetration of crystallizing media Offers excellent value for the money Good protection against wear, with abrasive and hardening media Recommended shaft surface hardness: HRC 50 Operating range Pressure [p max]: 25 bar, Velocity [v max]: 20 m/s Pressure [p max]: 100 bar, Velocity [v max]: 2 m/s Pressure [p max]: 100 bar Temperature: t = -50… +250 °C pH: 2 - 12 Density: 1.20 g/cm³ Practical useful application data: max. temperature: +200 °C Main application Centrifugal pumps Mixer Agitators Autoclave Filter Refiner Kneader Paddle dryer Suitable for Pulp and paper industry Sugar industry Power plant technology Waste water technology Mining industry Variant Trapez shape TP7 P7A without lubricant for valves, armatures, gate valves S7G...

DESCRIPTION High stability on high capacity. Can handle multiple ointment viscosity and types Type of metal used S.S 316 / 304 Certifications ISO 90012015, OHSAS 180012007, ISO 500012011, ISO 450012018 SPECIFICATION Preparation unit tanks for first and second phase Storage tank equipped with flowmeter system Homogenizer Sanitary centrifugal pump Mechanical filter Filter platform collector Pipes and fittings All joints are tic and orbital welded, polished and treated Stainless steel Teflon check valves, Pipe tri clamp joints. The production capacity varies depending on the type of products Gear pump cycle of the feeding device can speed up product forming and rapid discharge Semiautomatic weigh filling machine for gallons. Monoblock filling and capping machines feeding and collecting tables HMI and SCADA with touch screen system. Available certification up on your request UL, CE, GMP, FDA, ASME.

Series F1 - F4 The HEINKEL inverting filter centrifuge of the Series F requires minimum installation space and is characterized by an integrated clean room design. It is suited for use with diffcult to filter products and characterized by hermetically closed design and the fully automated, continuous operation. Special properties for the customer’s benefit: Advanced development of the proven inverting filter centrifuge Series HF Larger basket volume as well as higher centrifugal forces in comparison with Series HF Easy installation, especially in clean rooms because of outer smooth surfaces and machine contours Inerting system and all junction boxes accommodated in the machine housing Easy access to machine housing via maintenance doors at three sides

Series HF 300.1 - HF 1300.1 Based on its gentle product discharge leaving no residual heel and therefore the possibility of thin cake filtration, the HEINKEL inverting filter centrifuges of the Series HF are ideally suited for use with diffcult to filter products. They are characterized by hermetically closed design and the fully automated, continuous operation. Special properties for the customer’s benefit: Proven, robust design Design matches with requirements in the chemical and pharmaceutical industry Best choice for demanding products Residual heel free product discharge and minimum installations in housing and basket, thus optimal for high potent API products with highest possible product yield Considerable residual moisture reduction in respect to conventional filtration by pressure added centrifugation (PAC) possible

Description F 1 Manufacturer Heinkel Machine no. 1002/72 Product contacted material AISI 316 Basket diameter (mm) 450 Filter area (m²) 0.30 Nominal volume (l) 27 Rpm (min-1) 2,400 g-force, max. (x g) 1,840

Description HF 800.1 Year of construction 2001 Manufacturer HEINKEL Machine no. 1239/13 Product contacted material 1.4571 (316 Ti) Control and drive system Not available Support frame No Rotational drive Drive Axial drive Drive PAC® system Available Ex design Yes ATEX Yes Basket diameter (mm) 800 Filter area (m²) 0.85 Nominal volume (l) 144 Load, max (kg) 150 RPM (min-1) 1,600 G-force, max (x g) 1,150 Weight of machine (kg) 6,200