Carbon dioxide - Import export

When it comes to filter material, there are a few points to consider. The filter material should have a large surface area. This ensures a good exchange rate between exhaust air and filter material and provides sufficient space for microorganisms to colonise. The filter material must be designed in such a way that it has a good water holding capacity. The colonised microorganisms are only viable in a moist environment. In general, different filter materials are used in one batch. The reason for this it ensures both a good stability of the filter bed and a larger surface. In addition, the added microorganisms must be sufficiently supplied with inorganic nutrients and trace elements, unless this is provided by the composition of the exhaust air. The temperature inside the biofilter system plays a decisive role as well. Temperatures between 5 °C and 40 °C are favourable for the microorganisms to work properly.

The NDIR bundle CO2 is a set of perfectly matching components for the gas analysis of carbon dioxide and offers research teams, institutes and laboratories the right solution for the demand of short term required IR components in small volumes. Micro-Hybrid is combining a NAC-based IR emitter with reflector of the JSIR 350 series with the highly sensitive thermopile dual detector of the MTS 2 SENS series. The narrow band filter of the dual detector is optimized to absorb carbon dioxide (CWL: 4265 ± 25 nm / HBW: 120 ± 10 nm) and has an additional reference channel (CWL: 3910 ± 28, HBW: 70 ± 10 nm). Designed for use in research projects in the fields of cell growth, plant cultivation or industrial gas measurement, our NDIR bundle CO2 provides developers with immediate results in gas analysis.

The narrow band IR filters of the MPS4SENS 3C-2 carbon dioxide enhance the measurement of carbon monoxide (CO) (CWL: 4650 ± 40, HBW: 180 ± 20 nm), carbon dioxide (CO2) (CWL: 4415 ± 30, HBW: 60 ± 10 nm) and carbon compoundsn (CWL: 3400 ± 20, HBW: 140 ± 20 nm) with reference channel (CWL: 3910 ± 28, HBW: 70 ± 10 nm). The detector covers a wide range of applications in aerospace, medical, industry and environmental technology at ambient temperatures between -20 and 85 °C. Only Micro-Hybrid develops and manufactures 4-channel pyroelectric detectors with a thin film membrane made of ceramic pyroelectric material in a TO39 package. This high performance material gives the detector a very high detectivity of up to 4.0*10^8 cm√Hz/W and a high sensitivity of up to 200000 V/W. The unique detector design of Micro-Hybrid enables the high read-out rate up to 100 Hz as well as the short response time for reliable measurement results in NDIR gas analysis.

The narrow-band filter of the MTS2SENS200 carbon dioxide with a CWL of 4265 ± 25 nm and an HBW of 120 ± 10 nm is optimized for the measurement of carbon dioxide (CO2) with reference channel (CWL: 3910 ± 28, HBW: 70 ± 10 nm). The detector is characterized by an integrated thermistor for reference temperature determination and an interference absorber. They both ensure that the signal is converted as efficiently as possible from radiant energy to thermal energy. The basis of the IR thermopile MTS2SENS200 carbon dioxide are 2 chips with 200 bismuth-antimony/antimony thermocouples each. Thanks to them and the filling with krypton, the detector convinces with a detectivity of up to 6.27*10^8 cm√Hz/W and sensitivity of up to 171 V/W. The signal quality is comparable to pyroelectric detectors. The detector can be used at ambient temperatures between -20 and 85 °C in numerous industrial, aerospace and medical applications: Exhaust gas measurement, breath gas analysis or patient monitoring.

The narrow band filter of the MPS2SENS carbon dioxide with a CWL of 4265 ± 25 nm and a HBW of 120 ± 10 nm is optimized for the measurement of carbon dioxide (CO2) with reference channel (CWL: 3910 ± 28, HBW: 70 ± 10 nm). The detector suits for demanding applications in medical, industry and environmental technology. With its very high read-out rate of up to 100 Hz and a short response time, it provides precise measurement results reliably and quickly. The pyrodetector MPS2SENS carbon dioxide is based on 2 chips with a thin film CPM membrane. Thanks to the Ceramic Pyroelectrical Material (CPM) the detector features a very high detectivity of up to 4.0*10^8 cm√Hz/W and sensitivity of up to 200000 V/W. The signal quality of our pyroelectric sensors is unchallenged. The detector operates within ambient temperatures ranging from -20 to 85 °C and covers a wide range of applications: NDIR gas analysis, industrial process and exhaust gas measurement, and respiratory gas monitoring.

The highly sensitive pyroelectric quad detector allows the combined measurement of carbon monoxide (CWL: 4650 ± 40, HBW: 180 ± 20 nm), carbon dioxide (CWL: 4265 ± 25, HBW: 120 ± 10 nm) and carbon compounds (CWL: 3400 ± 20, HBW: 140 ± 20 nm) with reference channel (CWL: 3910 ± 28, HBW: 70 ± 10 nm). The detector can be used at ambient temperatures between -20 and 85 °C in numerous applications in aerospace, medical, industry and environmental technology. Micro-Hybrid is the only manufacturer of 4-channel pyroelectric detectors with a high performance membrane in a TO39 package. The very high detectivity of up to 4.0*10^8 cm√Hz/W and sensitivity of up to 200000 V/W is achieved by the pyrodetector MPS4SENS 3C-1 carbon dioxide due to the chips with a thin film membrane made of ceramic pyroelectric material. The unique detector design of Micro-Hybrid enables the high read-out rate up to 100 Hz as well as the short response time for reliable measurement results in NDIR gas analysis.

The analyzer for carbon dioxide and oxygen has been specially designed for monitoring cell growth processes in biotechnology. The device can be installed directly in the exhaust flow of the bioprocess and measures the concentration of CO2 and O2 there in real-time. The BlueInOne Cell automatically compensates any fluctuations of pressure and humidity in the system. The readings are therefore extremely accurate even under fluctuating measuring conditions. The BlueInOne Cell gas analyzer is fitted with an IR CO2 sensor, as well as a electrochemical oxygen sensor with galvanic cell. The O2 detector offers a measuring range of 0-100 % Vol. for oxygen, long-term stability and has a very high resolution of 50 ppm. The device can also analyze anaerobic processes with high precision.

Off gas analysis in bioprocesses delivers important informatione about respiratory activity like CTR from which actions for process optimization and scale-up can be deduced from. The BCP-CO2 sensor will help you to understand and control your processes better. The CO2 analyzer BCP-CO2 services for application in fermenters and bioreactors of any scale. No matter if you are working in big stainless steel tanks, shake flasks, disposable, single-use or parallel reactorsthe BCP-CO2 is easy to install, doesn´t need much maintenance and offers an integrated, automatic pressure and temperature compensation. BCP-CO2 measures directly in the process. Additional pipes are not necessary. The extremely robust sensor has a IP65 aluminium housing and is well applicable under harsh process conditions.

Compressed gases are removed from gas cylinders using RIEGLER flange pressure controllers, which are used during welding, cutting or other related processes. We offer flange pressure controllers according to DIN EN ISO 2503 for flammable and non-flammable gases up to 200 bar and up to 300 bar. All flange pressure controllers are each equipped with a pressure gauge for the display of the cylinder contents and the working pressure. In addition you can also get flange pressure controllers with a flowmeter. Our flange pressure controllers can be used for oxygen, compressed air, nitrogen, carbon dioxide, argon, acetylene, hydrogen, methane, illuminating gas and natural gas.

Compressed gases are removed from gas cylinders using RIEGLER flange pressure controllers, which are used during welding, cutting or other related processes. We offer flange pressure controllers according to DIN EN ISO 2503 for flammable and non-flammable gases up to 200 bar and up to 300 bar. All flange pressure controllers are each equipped with a pressure gauge for the display of the cylinder contents and the working pressure. In addition you can also get flange pressure controllers with a flowmeter. Our flange pressure controllers can be used for oxygen, compressed air, nitrogen, carbon dioxide, argon, acetylene, hydrogen, methane, illuminating gas and natural gas.

Carbon dioxide CO2

Carbon dioxide CO2

Carbon dioxide CO2

Carbon dioxide CO2

Carbon dioxide CO2

The sliding gate manual valve for low temperature type 8056 in reinforced version is used for cryogenic control applications down to 200°C. Media such as hydrogen, nitrogen, oxygen, carbon dioxide, etc. can be shut off safely and can be controlled excellently, even in the low temperature range.

Provides Consistent, Accurate Responses to Next Generation Refrigerant As the first accurate, reliable, highly sensitive, cordless refrigerant leak detector, the original D-TEK revolutionized the field. Now we have built on that technology leadership with the D-TEK CO2, the only hand-held refrigerant leak detector designed especially to detect carbon dioxide, the next generation refrigerant. The D-TEK CO2 uses an innovative infrared absorption sensing cell which is extremely selective to carbon dioxide, yet its circuitry allows the instrument to equalize to the CO2 present in the atmosphere, so there is minimal risk of false alarms. D-TEK CO2 maintains its sensitivity over time for consistent, accurate and reliable performance. Its specialized infrared sensor cell lasts for approximately 1,000 hours, so you buy fewer replacement parts. Additional features include a charging status indicator, sensor failure indication, sensor test mode and rechargeable NiMH (nickel metal...

High-quality finish for the beverage industry. To handle carbon dioxide, non-alcoholic and alcoholic beverages up to an alcohol content of 96%. Construction: Light-coloured special tube Tension and pressure resistant, highly elastic fabric inlays Optional: Concealed steel spiral Red, abrasion-resistant, weather-resistant cover Interior and exterior smooth, fabric patterned Suitable for CIP and conventional cleaning, brief steam cleaning up to 120°C All food qualities used by SIMON meet the current requirements of the German Institute for Consumer health Protection and Veterinary Medicine (BfR) and the US Food & Drug Administration (FDA). Sold by the roll or fixed lengths. SIMON food quality hoses are available with built in fittings using the SIMON – Vulkofix method on request. Other versions and dimensions on request.

Leak detector high detection sensitivity for pressurised piping and containers, e.g. on compressors, steel bottles, fittings, shut-off valves, breathing devices, oxyacetylene gas and inert-gas arc welding devices, Bunsen burners, valves, screw fittings of compressed-air lines etc. Suitable for compressed air, refrigerant, acetylene, butane, natural gas, carbon dioxide, gaseous oxygen, propane, town gas, nitrogen, hydrogen and, ammonia Suitable for checking the safety of systems with combustible gases and for avoiding financial losses through unrecognized leaks Advantages and benefits Frost-proof to -15°C Saves energy and warns of gas loss Contains corrosion protection inhibitors Tested by the DVGW in accordance with DIN EN 14291 Non-combustible Economical in use

Piping and hoses, for example steel bottles, compressors, breathing devices, oxyacetylene gas and inert-gas arc welding devices and burners Fittings, flanges, valves, screwed connections, soldered and welded connections of pressure gas systems and lines Suitable for compressed air, refrigerant, acetylene, butane, natural gas, carbon dioxide, gaseous oxygen, propane, town gas, nitrogen, hydrogen and, ammonia Advantages and benefits Acts non-corrosive Allows direct visual inspection of the leakage point through bubble formation Tested by the DVGW in accordance with DIN EN 14291 Suitable for spraying overhead

Piping and hoses, for example steel bottles, compressors, breathing devices, oxyacetylene gas and inert-gas arc welding devices and burners Fittings, flanges, valves, screwed connections, soldered and welded connections of pressure gas systems and lines Suitable for compressed air, refrigerant, acetylene, butane, natural gas, carbon dioxide, gaseous oxygen, propane, town gas, nitrogen, hydrogen and, ammonia Advantages and benefits Acts non-corrosive Allows direct visual inspection of the leakage point through bubble formation Also available as spray version OKS 2801 Spray version tested by the DVGW in accordance with DIN EN 14291 Spray version suitable for spraying overhead

High-quality finish for the brewing and beverages industry. To transport beer, brewing yeast, unfermented wines, fruit juice, carbon dioxide and alcohols up to 96%. Construction: Light-coloured EPDM tube Tension and pressure resistant, highly elastic fabric inlays Optional: Concealed steel spiral Red, abrasion-resistant, weather-resistant EPDM cover Interior and exterior smooth, fabric patterned Suitable for CIP and conventional cleaning, brief steam cleaning up to 120°C All food qualities used by SIMON meet the current requirements of the German Institute for Consumer health Protection and Veterinary Medicine (BfR) and the US Food & Drug Administration (FDA). *) Spiral hose version Sold by the roll or in fixed lengths. SIMON food quality hoses are available with built in fittings using the SIMON – Vulkofix method on request. Other versions and dimensions on request.

CO2 laser marking systems are part of the gas laser group: the laser beam is generated in an enclosed laser tube which is filled with carbon dioxide. The REA JET CL is suitable for the marking of packaging, glass, wood, plastics, PVC, anodized aluminum, the color removal on surfaces as well as direct marking of foods. In the creation of texts, graphics and characters there is complete freedom of design. Applications — Marking of glass, wood, rubber, engraving and color change marking of plastics (automotive, medicine, consumer goods) — Coding of cardboard boxes and outer packaging (e.g. in the pharmaceutical, cosmetic and food sectors) — Coated substrates (e.g. anodized aluminum) — Direct marking of foodstuffs — Laser color change marking — Color mirror engraving

Carbon dioxide detection in industrial plants: Measuring range 0 – 5 % or 0 – 2 % vol. For Martians – provided they exist – a carbon dioxide atmosphere might be their natural habitat. We earthlings can only tolerate low concentrations of this gas. It is true that we are using the special properties of CO 2 for many purposes, but in concentrations above 5000 ppm it can be hazardous to our health. Therefore it must be monitored. In areas that are rarely accessed, such as beverage dispensing facilities, a leak detector might do as a warning device. Wherever people are present, such as workplaces in plants, industrial grade gas detection equipment is required. Here it is: Statox 501 IR. This new version of the field proven Statox 501 IR for combustible gases operates as a 4 – 20 mA transmitter. It can be connected directly to a recording device, process control system, or the optional Statox 501 controller. Its unmatched compact design makes it operable in any environment whether it is food industry, chemical industry, refineries, or cleaning facilities. This explosion proof instrument will do the job everywhere. It is water proof (rated IP 67). The housing materials (stainless steel and fiber-reenforced polyamide) are rugged and easy to clean.

Made-to-measure gas supply If you are looking for a customised solution for your gas filling project, take advantage of our expertise and long experience for efficient, customized concepts. Together we will develop initial ideasinto tailored reliable systems. For the widest possible range of requirements in connection to the supply of gases, Filltech offers a solution; from compact stainless steel cartridges through various cylinder sizes and connecting valves to the development of filling plants. Gasfilling services Next to the production of custom-made gas filling stations, Filltech can als offer you additional gas filling services. The filling of cylinders with various gases such as carbon dioxide, noble gases, flexible and oxygen mixtures can be realized at our premises. From the ideato the optimal solution There is only one priority: the optimal design of your application with the appropriate requirements. In addition, our solutions can be flexibly integrated into your system. F

The AtmoSense™ is a flexible process analyzer designed to provide real-time measurements of process gas variables in a wide variety of atmosphere control applications. The AtmoSense™ is available with a range of sensors and options to provide accurate measurement of either dew point, relative humidity(%RH), methane(CH4), propane(C3H8), hydrogen(H2), carbon monoxide(CO), or carbon dioxide(CO2). Choose NEMA enclosure for permanent mount or pelican case with battery for portable use.

The four-channel pyrodetector is optimized for gas analysis during anesthesia by four optical filters for the following gases: carbon dioxide (CO2) (CWL: 4265 ± 25, HBW: 120 ± 10 nm), nitrous oxide (N2O) (CWL: 4525 ± 20, HBW: 83 ± 6 nm), desflurane (CWL: 8224 ± 40, HBW: 240 ± 24 nm) and isoflurane (CWL: 8550 ± 40, HBW: 180 ± 18 nm). Medical, especially patient and anesthetic gas monitoring, represent typical application fields for the MPS4SENS anesthesia. The pyrodetector is designed for applications in environments ranging from -20 to 85 °C. The very high detectivity of up to 4.0*10^8 cm√Hz/W as well as the very high sensitivity of up to 200000 V/W provide an extraordinary signal quality in the field of pyroelectric detectors. The quad detector is based on 4 sensor chips with a thin film CPM membrane. Thanks to the Ceramic Pyroelectrical Material (CPM) and the unique product design the detector convinces with a high read-out rate up to 100 Hz as well as with the short response time.

With its very high detectivity of up to 4.0*10^8 cm√Hz/W and a sensitivity of up to 200000 V/W, the 4-channel detector is the high end solution for demanding test applications. The detector is designed for the following gases: Water Vapor (H2O) (CWL: 6580 ± 40, HBW: ± 35 nm), Carbon Dioxide (CO2) (CWL: 4265 ± 25, HBW: 120 ± 10 nm) and alcoholic compounds (CWL: 9663 ± 80, HBW: 240 ± 40 nm). The precise measurement results are backed up by the reference channel (CWL: 3910 ± 28, HBW: 70 ± 10 nm). The pyrodetector is suitable for test setups and teaching at ambient temperatures between -20 and 85 °C. The pyroelectric detector is characterized by the wide spectral sensitivity 2 - 15 µm (optimized from 3 - 5 µm), the high sensitivity with a modulation frequency up to 100 Hz. The low microphone effect due to the low membrane mass, the very low temperature dependence and amplified signal in current mode make the MPS4SENS TEST less sensitive to external interferences.

A third category of membranes is used for degassing liquids. When applying a vacuum to one side of the membrane, the liquid itself is not permeable and there is no loss. One typical application is removing dissolved oxygen from brewing water in order to avoid any oxidation processes.