Car parking system - Import export

Pallet based automated car parking system RESPACE Pallet based technology The pallet based automated car parking system RESPACE is an interesting solution for creating up to 50 parking spaces. Drivers park their car on a pallet in a cabin. The cabin is the only interface between the driver and the car park. From this point everything is automatic. The door of the cabin closes and the car is transported downwards by lift. From there the car standing on the pallet is brought to a free parking space via roller conveyors. The pallet based parking system RESPACE is characterized by a very compact design. From the lift the pallets with the vehicles are moved directly to adjacent parking spaces. Car parking and removal follows according the puzzle principle. The car park has 60 parking spaces and is used as a hotel car parking, but also available to the public.

Palletless automated car parking system CUBILE Palletless technology The palletless fully automated car parking system CUBILE is a perfect solution for creating from 50 to over 1000 parking spaces. As no pallets are used for transporting cars, the system is very fast and efficient. Drivers park their car at ground level in one of the entrance cabins and receive a parking ticket. The cabin is the only interface between the driver and the car park. From this point everything is automatic. The cabin’s rolling gate closes and the car is transported below ground in a lift before it is collected by one of horizontal transfer vehicles and brought to a free parking space. In the palletless parking system CUBILE, the Lödige Shifter does the heavy lifting. This is an ultra-flat robot that drives underneath the car and lifts it up at the wheels to take it from the lift to the transfer vehicle and transport it to the parking space.

Mobile height limiter can be swivelled horizontally by means of swivel posts, with cable reinforcement, locking closed or open with bolt, locking via profile cylinder lock, concrete erection device to be mounted by means of adapter plate on the stand post, can be craned

Set of brake pads parking brake for wheel loader FERRUM DM620x4 - consisting of 2 pieces as shown.

Set of brake pads parking brake for wheel loader FERRUM DM416x4 - consisting of 2 pieces as shown.

Self-adhesive floor-marking shape “T” for indicating danger zones, storage spaces, walkways etc. • Floor marking shape: "T" • Floor-marking shape for indicating dangerous areas, storage spaces, walkways, etc. • Self-adhesive symbol for application on floors in interior areas • Abrasion resistant and hard-wearing • Colour code: RAL 1003 signal yellow

haacon offers parking supports for the parking of containers and swap bodies. One set consists of 4 individual supports. Containers up to 32 t can be easily and inexpensively parked for loading and unloading or for intermediate storage. The standard version with stability up to wind force 7 can be moved on mounted solid rubber wheels. The particularly 'storm-proof' version with stability up to wind force 12 has an extended foot version and is transported either by forklift or a small auxiliary vehicle. The supports are designed in accordance with BGV D8 and can support a max. load of 11 t per support. To set down the container, the supports are attached to the lower ISO corners and locked. By means of air suspension the vehicle is lowered so that the truck can exit. The container remains on the supports until it is picked up again.

For the use as a design element, safety object, or just easy handling, our wide range of outdoor equipment offers a lot of creative possibilities for an exclusive result. Bicycle racks Bicycle racks, serial parking, individual stands, bicycle lean-on hoops, practically and creative, the hot dip galvanization with or without a powder coated surface in RAL- or DB-colors, guarantees a long life product.

self leveling mortar

Fast, safe and convenient car parking. Faster parking for added flexibility Parking spaces are in short supply! When space for access ramps becomes an issue, we provide the optimal solution. The hydraulic car elevator TRAFFICO transports both car and passengers quickly and reliably to the desired parking level. A wide selection of options is offered for this classic car lift to meet individual requirements. Convenience important? The most convenient way to initiate operation is by remote control or smart card. The reader can be installed next to the lift entrance on a pedestal, for example, with pull wire switches at each level. Light beams between the cabin and shaft doors avoid any damage to the car during entry and exit. Light barriers facilitate vehicle positioning, thereby speeding up access. In the case of systems with two stopping points, the journey to the other level commences automatically as soon as the vehicle is positioned correctly.

Space-saving parking of one or two cars Park the car on the platform and let it magically disappear in a pit The car scissor lift VERTICAR from Lödige is a perfect solution for parking one or two cars in a very confined space. A significant advantage of VERTICAR is minimum space requirement. This is successfully achieved through the integration of the machine into a pit. Thanks to an overhead canopy, a flat and even surface is provided and the lifting table, i.e. the parking position is fully covered. As a result a vehicle is parked in a pit and the overhead surface remains completely intact. Furthermore, as it requires a low installation height, a classic shaft is not necessary. Benefits of the car scissor lift Saves on construction space as a ramp is not required Creates two car parking spaces in even the tightest locations Safe operation with fingertip control Bio-oil used to protect the environment

Floor marking for outdoor area / car park has been especially developed as a self-adhesive floor marking tape for outdoor use on uneven / rough surfaces with very high temperature resistance, e.g. for internal car parks, for car park marking in outdoor areas, outdoor storage as well as internal road marking.

Our uninsulated halls offer simple and inexpensive all-round protection for the storage of temperature-insensitive goods. They are ideally suited for storage, roofing of construction sites or for temporary assembly. The areas of application of our uninsulated halls: - Storage for temperature-insensitive goods - protected loading of transporters - protected parking and storage area - Picking for goods of all kinds - Maintenance and repair For your roof and wall covering you can choose between a PVC tarpaulin or a trapezoidal sheet. Made of highly tear-resistant, and durable industrial PVC, tarps are a cost-effective alternative compared to other cladding options.

To protect your goods from condensation or condensation water, it is possible to integrate a special underlay tarpaulin. It consists of mesh fabric, which allows moisture to diffuse from the inside of the hall to the outside. The fields of application of our condensation water protected halls: - Storage for temperature-insensitive goods - protected loading of transporters - protected parking and storage area - Picking for goods of all kinds - Maintenance and repair When single-layer tarpaulins in the roof are no longer sufficient, we at HR-Structures recommend our modern thermal tarpaulins. Produced in membrane technology, the two-layer roof and gable covering has a heat-insulating effect and prevents condensation on the underside of the roof tarpaulin. It consists of two shells, which are filled with air and thus provide additional insulation and protection against condensation. As wall cladding we recommend here the trapezoidal sheet.

HR-Structures canopies without wall cladding: The ideal solution to quickly create covered loading zones and storage areas. Our storage tents protect from direct sun, rain, hail or snow from above. The areas of application of our canopies: - Storage for weather-insensitive goods - Protected loading of transporters - Protected parking and storage area - Picking for all kinds of goods - Roofing of sports facilities The covering of your roofing can be freely chosen between a PVC tarpaulin or a trapezoidal sheet. Our highly tear-resistant PVC tarpaulin can be installed quickly and cost-effectively due to its low weight, while our trapezoidal sheets offer even better weather protection and the possibility of installing photovoltaic modules. Depending on your wishes and local conditions, your roofing can be anchored using ground nails or dowels to ensure maximum stability.

For precise positioning of dollys or material trolleys suitable for different wheel diameters no brakes needed self-adhesive, for tool-free assembly no screwing required, immediately ready for use Models: High / high, for light to medium weights Low / high, for medium to heavy weights Low / low, for heavy weights Different lengths available on request. Material: Alumnium Surface: Plain Extra accessories possible Compatible One-piece end caps; self-adhesive, screwable with optional screw-on set Yellow position markings with signal effect to indicate the position of the wheels from floor dollys or material trolleys in the parking rail Plastic PA, glass ball reinforced

Floor Markings for easy and reliable marking of parking / storage areas etc., self-adhesive;Forklift-resistant and stable floor marking with outstanding adhesive strength, suitable for almost all industrial floors, removable without leaving residue. Floor Marking Shapes: T-/L-Shape in 50 or 75 I-Shape in 50 / 75 / 100 Foot Shape 90 Floor Windows: DIN A5 - 5.8" x 8.3" 1/3 DIN A4 Portrait - 8.3" x 3.9" DIN A4 - 8.3" x 11.7" 1/2 DIN A4 Landscape - 11.7" x 4.1" Material: Plastic PVC Color: Yellow, red, blue, green, white