Cap for tube - Import export

Caps and stampings we can deliver the most diverse materials. Size, type and form are in this case matched to the customer's wishes and are manufactured according to customer drawings. Sit down just contact us and we will help you in designing a suitable product for your needs. Tubes and tube sections By combining different materials, the applications are widely held. These range from the electrical insulation of components of chemical protection through to thermal protection elements and cables. Depending on customer requirements, our tubes and cores are already manufactured to the desired level and then shipped as cargo.

Shapely packing container with screw cap. Emptying without residues because there are no crevices, cost-effective.

Micro Tube SafeFit, 0.5 ml with Cap

Micro Tube, 1.5 ml without Cap

Screw Cap for Tube 30/85 mm

Tube 44/114 mm, without Cap

Tube 30/126 mm, without Cap

Tube 30/85 mm, without Cap

Screw Cap for Tube 30/126 mm

Micro Tube SafeFit, 2.0 ml with Cap

Micro Tube SafeFit, 1.5 ml with Cap

Screw Cap for Tube 44/114 mm

Micro Tube EasyFit, 1.5 ml with Cap

Micro Tube SafeFit, 5.0 ml with Cap

Tube Stool 25/107 mm, Screw Cap with Spoon

Tube Stool 20/76 mm, Screw Cap with Spoon

Tube Stool 16/100 mm, Screw Cap with Spoon

Test Tube, Screw Cap, 16/57 mm, Round Bottom, Standing Rim

Test Tube, Screw Cap, 25/107 mm, Conical Bottom, Standing Rim

Test Tube, Screw Cap, 20/76 mm, Round Bottom, Standing Rim

Test Tube, Screw Cap, 16/100 mm, Round Bottom

For precise labelling, products with an accessible cavity are manually placed on a format mandrel. By actuating the foot switch or the optionally available 2-hand control, the labelling process is triggered, the product is rotated, and the label is applied precisely to the circumference of the product. If front and back labels are on one label roll, the system can also place several labels on the circumference. The distance between the labels can be adjusted in the PLC. Optionally, the labels can be aligned using a welding seam or other product features (such as opening tabs or lid recesses for tubes). A pneumatic ejection makes the removal process superfluous and blows the well labelled products into a collection box

Designed as in-tank suction strainer elements for direct installation into suction lines of pumps; should always be installed below the minimum fluid level of the reservoir Features ▪ Available with female BSP thread (ISO 228) or female NPT thread (ANSI B1.20.1) Materials ▪ Threaded end cap made of glass-fibre reinforced Polyamide (PA) or Aluminium ▪ Lower end cap and support tube made of Steel, zinc-plated ▪ Standard filter material is Stainless Steel Mesh (125 μm); alternative micron ratings of 60 μm and 250 μm on request Consult STAUFF for alternative materials. Media Compatibility ▪ Suitable for use with Mineral and Petroleum based hydraulic fluids (HL and HLP) Technical Data ▪ Operating temperature range: -20 °C ... +100 °C / -4 °F ... +212 °F ▪ Integrated bypass valve with an opening pressure of 0,2 bar (3 PSI) to reduce the risks of high-pressure drops that can be caused by contaminated strainer elements or high-viscosity fluids Special sizes, designs, materials and...

The AdCap is a desiccant capsule with 1g, 2g or 3g desiccant as an additive for tablet containers. Due to the grid-structure and the cardboard disk the AdCap provides a superior humidity adsorption. The product is available in white, blue and transparent, other colors upon request. Sanner also offers a wide range of matching plastic tubes & caps.

Our new NMR septum caps for standard 5 mm NMR tubes are made of EVA and have a special sealing septum inside the cap. This septum ensures significantly better sealing than standard NMR caps, for example with regard to chloroform or other solvents. A special evaporation test conducted by Bruker Biospin confirmed the extraordinary tightness of the caps. The caps can be punctured with conventional needles, and are also suitable for automated applications. NMR-septum-caps

Fränkische Industrial Pipes perceives itself as an international partner for developing technical sophisticated corrugated tubes, tubing systems and cable protection tubes as well as fluid systems for the automotive sector, household appliances, machine engineering and apparatus engineering and also for the industrial sector. The range of accessories is tailored to the most diverse applications of our corrugated tubes and protective sleeves

Telescopic installation set for civil engineering / road construction / pipeline construction. Infinitely adjustable, with square key bar, dome sleeve, pull-out guard, cap, protective tube and stepped bell with dirt-tight fit. Poles and castings completely galvanized.

Powder handling without creating dust is always a challenge in industrial processes. Müller dust-free docking systems offer you a simple and reliable solution to this problem. The Müller docking system centers around the silicone rubber cap, whose special lip seal ensures reliable, flexible and dust-free docking. This simple docking method used in conjunction with other Müller components enables a wide variety of dust-free product transfers to be carried out cost-effectively. Standard version Simple docking Accurate positioning not necessary Key to sketch: A - product B - into machine C - silicone elastomer cap D - system inlet tube / cone E - lip seal Version with hopper pressed against lip seal Simple docking if system becomes slightly pressurized Key to sketch: A - product B - into machine C - silicone elastomer cap D - system inlet tube / cone E - lip seal pressed down Telescopic version Simple docking with telescopic intermediate tube Key to sketch: A - product B - into...