Results for
BURSTER PRÄZISIONSMESSTECHNIK GMBH & CO KG
Germany
Based on its specifications, this device can be used in various applications. It is especially suitable for resistance measurement on insulating materials such as e.g. cable insulations, foils, textiles, surfaces, insulating liquids,etc. With a test voltage of 45 V, 100 V, 250 V and 500 V the device fulfi ls most test specifi cations such as e.g. DIN 51953, 53482 and 54345. The guard switching allows single resistance measurements in a triangle wiring. This could be e.g. a two line cable with common shield or the measurement of insulating materials on a guardring measurement cell. The selection of the measurement range is done manually or automatically. Fast subsequent measurements can be realized by the internal limit value indicator. When the measured value exceeds the limit the limit value indicator switches and activates a potential-free relay output. The megohmmeter RESISTOMAT® model 24508 is the right instrument for its use in laboratory as well as in industrial applications.
Request for a quoteOPSYTEC DR. GRÖBEL GMBH
Germany
The UV measuring probes with 14 mm diameter only serve as compact, long-term, stable measuring heads for the supervision of UV irradiation systems and for UV measurements in inaccessible locations. In addition, optional water and light guide adapters enable the application in hot locations and in water disinfection systems. The integrated electronics generate a signal voltage that is transferred to the UV monitor RM-31 or to the PLC with low noise by a shielded cable.
Request for a quotePFLITSCH GMBH & CO. KG
Germany
The new UNI Dicht TRI achieves the highest shielding attenuation values over the complete frequency range and convinces with a very high current carrying capacity for the reliable discharge of undesirably high shielding currents. The installation is simple and safe: only the cable sheath has to be removed at the contact point where the shielding braid is to be contacted. As soon as the cable is inserted into the cable gland, the TRI spring makes reliable contact with the cable shield, even in the case of non-circular or off-centre cables. In any case, this type of contacting from PFLITSCH means that the cable shield does not have to be exposed until directly at the connection point in the control cabinet. Because the shielding braid remains 100% intact, maximum shielding attenuation is achieved and the useful signals are transmitted without unnecessary interference from noise signals.
Request for a quoteJACOB GMBH
Germany
The PERFECT EMC-cable gland made of lead-free brass is the perfect cable entry solution for shielded cables to ensure trouble-free operation of electrical devices and systems. Features: — in compliance with RoHS — quick and easy EMC Connection — integrated anchorage for cables — wide sealing and clamping range — for cables from 3 to 48 mm — temperature range -20 °C / +100 °C (dynamic) -40 °C (static, short term) — Protection grade IP68 - 5 bar — Test standard UL 514B
Request for a quotePFLITSCH GMBH & CO. KG
Germany
The increasing spread of electromagnetic radiation and the greater sensitivity of modern electronic components mean cable glands have an important role to play in a system's screening concept. PFLITSCH offers a graduated selection of EMC capabilities in its UNI Dicht and blueglobe cable glands for use in EMC applications up to Cat. 7A. The EMC cable gland blueglobe TRI separates the functions of sealing and EMC screening and therefore achieves the highest attenuation values of 80 dB up to 100 MHz. Even in the frequency range up to 2.5 GHz, the values are typically at least 50 dB. High current-carrying capacity is also provided. A triangular spring fits around the cable's braided shielding. The design of the spring precludes its getting caught in the braiding if the assembly is dismantled.
Request for a quoteJACOB GMBH
Germany
The WADI one EMC cable gland made of nickel-plated brass is the perfect cable entry solution for cables with shielding. Features: — quick and easy EMC connection — large-area sealing protects the cable — integrated anchorage with high retention — wide sealing and clamping range — for cables from 3 to 53 mm — the inner sealing ring can be removed easily for larger cables — high UV, ozone and weather resistancy — temperature range -40 °C / +100 °C (dynamic) — protection grade IP 66 / IP68 up to 15 bar (30 min.) / IP69 — material of sealing insert fulfils UL 94 HB — with metric thread from M12 to M63
Request for a quoteJACOB GMBH
Germany
The PERFECT EMC-cable gland made of nickel-plated brass is the perfect cable entry solution for shielded cables to ensure trouble-free operation of electrical devices and systems. Features: — quick and easy EMC Connection — integrated anchorage for cables — wide sealing and clamping range — for cables from 3 to 44 mm — temperature range -20 °C / +100 °C (dynamic) -40 °C (static, short term) — Protection grade IP68 - 5 bar
Request for a quoteJACOB GMBH
Germany
The PERFECT EMC-cable gland made of nickel-plated brass is the perfect cable entry solution for shielded cables to ensure trouble-free operation of electrical devices and systems. Features: - quick and easy EMC Connection - integrated anchorage for cables - wide sealing and clamping range - for cables from 3 to 48 mm - temperature range -20 °C / +100 °C (dynamic) -40 °C (static, short term) - Protection grade IP68 - 5 bar - Test standard UL 514B
Request for a quoteGHM MESSTECHNIK GMBH
Germany
With 4 or 5-pin cable socket With or without shielding Various lengths PU material
Request for a quoteMETZNER MASCHINENBAU GMBH
Germany
The EM 600 can integrate up to six successive process tools in one single station. After insertion, the cable remains in a fixed position while the tools move towards the cable to provide optimum protection for the HV cable wires. The total cycle time of an EM 600 station is approx. 35 seconds for all operations of this station, with a total capacity of approx. 400,000 cable ends per year.
Request for a quoteMETZNER MASCHINENBAU GMBH
Germany
Metzner offers low-cost individual stations in the field of e‑mobility for the entry into high-voltage cable processing. For the first time, the EM 101 module offers a solution for removing the cable foil without affecting the cable shield. The automatic processing of high-voltage cable wires also necessitates the connection of various components of the connector system. The Metzner EM 102 takes care of this. The EM 103 allows the cable shield to be opened and cut using a patented process which ensures that there is absolutely no contact with the inner insulation. The EM 103S offers the functionality of the proven EM 103 to meet the requirements of smaller cable wires of up to 8 mm diameter. These cost-effective models cannot be integrated into an automation line and are equipped with only limited traceability functions.
Request for a quoteBDA CONNECTIVITY GMBH
Germany
High-quality television cables for interference-free reception. Characterized by coaxial construction and double shielding, our CATV cables offer optimal conditions for cable television.
Request for a quoteBDA CONNECTIVITY GMBH
Germany
High-quality television cables for interference-free reception. Characterized by coaxial construction and double shielding, our CATV cables offer optimal conditions for cable television.
Request for a quoteBDA CONNECTIVITY GMBH
Germany
High-quality television cables for interference-free reception. Characterized by coaxial construction and double shielding, our CATV cables offer optimal conditions for cable television.
Request for a quoteBDA CONNECTIVITY GMBH
Germany
High-quality television cables for interference-free reception. Characterized by coaxial construction and double shielding, our CATV cables offer optimal conditions for cable television.
Request for a quoteBDA CONNECTIVITY GMBH
Germany
High-quality television cables for interference-free reception. Characterized by coaxial construction and double shielding, our CATV cables offer optimal conditions for cable television.
Request for a quoteBDA CONNECTIVITY GMBH
Germany
High-quality television cables for interference-free reception. Characterized by coaxial construction and double shielding, our CATV cables offer optimal conditions for cable television.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
BDA CONNECTIVITY GMBH
Germany
The term "diode lines" dates back to the early days of hi-fi technology, when tubes were used in the output stages. Even today it is still used to describe cables for recording and/or playback connections between stereo equipment. Our diode cables with individually shielded wires are suitable for Chinch connections, pickup systems, stereophony and general applications in the LF range. Due to the relatively high-impedance input resistances, low-capacitance supply lines are required to avoid unwanted drop in height. 1- to 8-core constructions, each of which has low-capacitance PE insulation with individual core screening, meet these requirements. Core cross-sections of 0.08 mm² and 0.14 mm² are used.
Request for a quoteBDA CONNECTIVITY GMBH
Germany
The term "diode lines" dates back to the early days of hi-fi technology, when tubes were used in the output stages. Even today it is still used to describe cables for recording and/or playback connections between stereo equipment. Our diode cables with individually shielded wires are suitable for Chinch connections, pickup systems, stereophony and general applications in the LF range. Due to the relatively high-impedance input resistances, low-capacitance supply lines are required to avoid unwanted drop in height. 1- to 8-core constructions, each of which has low-capacitance PE insulation with individual core screening, meet these requirements. Core cross-sections of 0.08 mm² and 0.14 mm² are used.
Request for a quoteBDA CONNECTIVITY GMBH
Germany
bedea CATV-Cable TELASS® 3000 (A++) - FRNC. According to EN 50117-2-4 - coaxial cables for cable distribution systems, Indoor cable in the range from 5 MHz to 3000 MHz, shielding class A++ according to KDG 1 TS 153 test. High-quality television cables for interference-free reception. Characterized by coaxial construction and double shielding, our CATV cables offer optimal conditions for cable television.
Request for a quoteBDA CONNECTIVITY GMBH
Germany
bedea CATV-Cable TELASS® 3000 (A++) - PE. According to EN 50117-2-4 - coaxial cables for cable distribution systems, Indoor cable in the range from 5 MHz to 3000 MHz, shielding class A++ according to KDG 1 TS 153 test. High-quality television cables for interference-free reception. Characterized by coaxial construction and double shielding, our CATV cables offer optimal conditions for cable television.
Request for a quoteBDA CONNECTIVITY GMBH
Germany
The term "diode lines" dates back to the early days of hi-fi technology, when tubes were used in the output stages. Even today it is still used to describe cables for recording and/or playback connections between stereo equipment. Our diode cables with individually shielded wires are suitable for Chinch connections, pickup systems, stereophony and general applications in the LF range. Due to the relatively high-impedance input resistances, low-capacitance supply lines are required to avoid unwanted drop in height. 1- to 8-core constructions, each of which has low-capacitance PE insulation with individual core screening, meet these requirements. Core cross-sections of 0.08 mm² and 0.14 mm² are used.
Request for a quoteBDA CONNECTIVITY GMBH
Germany
bedea CATV-Cable TELASS® 3000 (A++) - PVC. According to EN 50117-2-4 - coaxial cables for cable distribution systems, Indoor cable in the range from 5 MHz to 3000 MHz, shielding class A++ according to KDG 1 TS 153 test. High-quality television cables for interference-free reception. Characterized by coaxial construction and double shielding, our CATV cables offer optimal conditions for cable television.
Request for a quoteXBK-KABEL XAVER BECHTOLD GMBH
Germany
GLOBALFLEX®-CY-control cables are used in tool-machines conveyor belts, production line in machinery production, in air-conditioning and in steel production for low loss data and signal transmission. They are used for installing in dry, moist and wet rooms, especially under the terms of industrial environment. Outdoor use only with UV-protection allowing for temperature range. GLOBALFLEX®-CY-control cables are suitable for medium mechanical stresses with free movement without tensile stress or forced movements. The high level of screening ensures a high degree of interference protection. the screening density assures disturbance free transmission of all signals and impulses. The product corresponds to the directive 2014/35/EU (low voltage directive).
Request for a quoteXBK-KABEL XAVER BECHTOLD GMBH
Germany
GLOBALFLEX®-CY-control cables are used in tool-machines conveyor belts, production line in machinery production, in air-conditioning and in steel production for low loss data and signal transmission. They are used for installing in dry, moist and wet rooms, especially under the terms of industrial environment. Outdoor use only with UV-protection allowing for temperature range. GLOBALFLEX®-CY-control cables are suitable for medium mechanical stresses with free movement without tensile stress or forced movements. The high level of screening ensures a high degree of interference protection. the screening density assures disturbance free transmission of all signals and impulses. The product corresponds to the directive 2014/35/EU (low voltage directive).
Request for a quoteGIGAHERTZ OPTIK GMBH
Germany
Detector head for the measurement of high irradiance of UV-C 254nm radiation in W/m². Features: pre-aging for long time stability, cosine field-of-view, metal shielded cable, for the usage with optometers and amplifiers, calibration certificate.
Request for a quoteLEONI DRAHT GMBH
Germany
Shielding braids consist of bobbin wires, located parallel, which have been braided into a tube. Manufactured from Cu-ETP1, Cu-OF1, LEONI-Histral®-alloys (upon request), aluminium and stainless steel, with coating in bare, tin-plated, nickel-plated or silver-plated, hard or soft annealed. Sinlge-wire diameter ranging from Ø 0.10 mm to Ø 0.40 mm. Cross-section ranging from 0.25 mm² bis 400 mm². Tubular shielding braid is smoothly expandable and has a very good shielding effect. The couverage can be determined precisely by changing the braiding angle. Suitable for electrical and mechanical shielding of wires, cables, cable bundles and cable harnesses.
Request for a quoteVENTION TECH GMBH
Germany
Ethernet Extension Cable,VENTION 10ft/3m Cat6 RJ45 Extender Male to Female Network Cable Shielded Computer LAN Connector SSTP Patch Cable
Request for a quotePCB PIEZOTRONICS GMBH
Germany
For use in harsh industrial environments, special sensors in particularly robust housings must be used. A water- and oil-tight cable connection is also often required, such as that offered by the M608A11 model. To protect against electromagnetic interference, a housing-insulated sensor construction and special amplifier electronics are used. Interference on the cable is also minimised by using twisted pair cables with additional shielding. Typical applications of such sensors include engine and transmission test benches as well as machine endurance test benches. — Industrial ICP®/IEPE accelerometer with integral 3m cable, terminating on cut-off cable -Measuring range ±50 g. — Sensitivity: 100 mV/g — Frequency range: 0.5 to 10000 Hz — With metric (M) or imperial mounting bolt For an individual quotation please contact us directly.
Request for a quoteResults for
Cables- shielded - Import exportNumber of results
32 ProductsCountries
Company type
Category