Cable guides - Import export

Safely guide many different cables in a confined space with e-spool. e-spool uniquely combines two different energy supply systems: one standard energy chain is guided by a roller, providing the correct length and tension of the energy supply system through an integrated spring. In the home position, the energy chain is completely rolled up to save space. The twisterband connects the roller with the shaft end block, serving as an interface to the supply side cables. - According to DIN EN 17206 and DGUV principle 315-390 - No tensile strain on the cables - Energy supply is possible in all directions (horizontal, vertical, diagonal) - Space-saving, no "chain station", as the energy chain is rolled up in the starting position, ensuring the paths remain clear - Cables can be retrospectively added or changed - Maximum extension and retraction speed 1m/s

Save 88% assembly time with cost-effective energy chain for intralogistics and crane systems. The igus autoglide 5 system transfers energy, data, fluids, and air safely in a single system, requires almost no maintenance, and is also very cost-effective, including a 2400.07AG.075.0 e-chain, steel cable guide, harnessed bus cable, and five single cores of 6mm² each.

PMA cable protection systems are used wherever the mechanical protection of electrical lines and cables is needed. Highly flexible cable protection tubes are specifically suited for the additional protection of cable guides in e-chain® systems. Due to the combination of technical knowhow and the strictest international safety guidelines, PMA fulfils the worldwide requirements of industrial markets in application areas like mechanical engineering, automotive construction, fiber optics, solar systems as well as applications in the robot sector with high speeds and millions of alternate bending cycles.

- Low-maintenance system for travel up to 100 m - Other sizes and versions available, travel up to 200 m and more with E2 roller e-chains® - Protection against weather and dirt exposure - Cost-effective and fully enclosed complete solution - Standardized and modular design - Simple wall assembly or optional floor mounting - Cable lengths up to 50% shorter than festooning, low-profile installation and no cable junction - Cables are at all times guided with a defined bending radius, and tensile forces are absorbed by the e-chain® - Cables cannot hook, jam, or tear - No slip ring contacts (as is the case on motor drums) -Cables or hoses can easily be retrofitted at any time Reduce electricity costs - direct drive due to scraper, no additional drives needed (as is the case on motor drums) Scraper arm (e.g. as mechanical connection to the scraper carriage) optionally available - we document the situation on-site and will propose a customised solution

Heavy duty energy feed to the ocean floor. e-chain® for enormously high torque as hanging use with up to 200 m length is possible. Very flexible and adaptable setup, so that large hoses and cables can be guided reliably. -For very high tensile forces -Hanging applications up to 200 m length -Very resistant against dirt and mud -Resistant to salt water and dirt -Very flexible and adaptable -For underwater applications Typical applications: -Offshore -Drilling ships -Oil platforms -Harbours -Ships in general The specially developed, media-resistant and flexible offshore e-chain® from igus® routes even cables with large diameters safely to the application. The heavy duty draw cable holds the weight of the system. Intensive tests in the igus® laboratory have proven the extraordinary load bearing capacity of the offshore chain.

This low cost tension/compression load cell is an especially robust component, which can be easily integrated in a girder assembly between two cables or chains for measuring force. The standard model comes with internal thread, allowing any adapter parts, for instance eye brackets, to be fitted in the axis of symmetry. Alternatively, the optionally available adapters with external thread can be used for quick and easy screw-fitting into a threaded hole made for the purpose. The radial connection cable is extremely flexible and designed for a wide range of motion. In order to achieve the greatest possible stability for such a small sensor, making it suitable not only for the laboratory but also for industrial use, all parts have been welded together including the cable guide bush in the sensor housing. burster TEDS with an electronic sensor datasheet or standardization of the output signal in the sensor connecting cable are offered as options

Desk mount with two flexible monitor arms. Individual adjustment of height, tilt and orientation of the screen. • Monitor mount with flexible arms for 2 screens including individual mounting option by bolt-through fixing and table clamp • Height, tilt and position of the monitor can be adjusted easily and individually to facilitate ergonomic working • Can be rotated 90° for working in portrait or landscape mode • Effortless positioning of the arms in the requested position due to individual adjustment of the spring • Universal VESA mount (75 x 75 mm or 100 x 100 mm) • For standard monitors up to 32” and 8 kg • Cable management: The monitor cable is guided along the monitor mount by internal cable channels and a clamp, thus protecting against cable breakage

Table column for two monitors with adjustable height, rotation and tilt of the screens. • Monitor mount for 2 screens including individual mounting option by bolt-through fixing and table clamp • Height, tilt and position of the monitor can be adjusted easily and individually to facilitate ergonomic working • Can be rotated 360° for working in portrait or landscape mode • The arms can be flexibly extended to 36 cm by three joints and swiveled up to 180 ° • Stepless height adjustment of the screens on a 45 cm high column • Universal VESA mount (75 x 75 mm or 100 x 100 mm) • For standard monitors up to 27“ and up to 8 kg • Cable management: The monitor cable is guided along the monitor mount by clamps, thus protecting against cable breakage

This universal range completely protects cables against dust, moisture and technical, thermal or chemical exposure. The versatile SILVYN® CHAIN range of energy supply chains also protect and guide cables in dynamic applications. Properties: — Cable protection hoses and metal or plastic glands suitable for use in a variety of applications. — Suitable for indoor or outdoor use, under various stresses and in various temperatures. — Easy to handle, very robust and durable. — Also halogen-free and available with international licences.

For universal outdoor use according to BGI 608 and use permanent on sites, IP 44. With the unique Bretec® Anti Cable Twist System for comfortable working. Reel body made from special plastic fitted to a galvanised steel tube frame. Innovative and ergonomic cable guide handle "cable pilot" for perfect cable-management during winding. Handle commutes on both sides and allows easy carrying and cable storage. For right and left handed easy to rewind. Rotary handle for comfortable rolling up. RN cable is approved to exacting site standards as per VDE 0100 part 704. 3 water-jet protected earthed socket outlets with self-closing protective caps. Thermal cut-out protection, indicator shows overheating or overloading. Design protected. / Patent pending. Cable length: 25 m Cable: H07RN-F 3G1,5 Cable quality: Rubber-Neoprene Cable colour: Black Reel-Ø: 240 mm

For short-term use outdoors, IP 44. Extension cable reel with plug and trailing socket. Cable reel with 2 m cable for connecting to the power source. With the unique Bretec® Anti Cable Twist System for comfortable working. Reel body made from special plastic fitted to a galvanised steel tube frame. Innovative and ergonomic cable guide handle "cable pilot" for perfect cable-management during winding. Handle commutes on both sides and allows easy carrying and cable storage. For right and left handed easy to rewind. With hinged rotary handle for comfortable rolling up. The BREMAXX® cable is extremely sturdy, highly flexible even at low temperature down to -35 ºC, oil- and UV-resistant and highly abrasion-resistant. Thermal cut-out protection, indicator shows overheating or overloading. Design protected. Patent pending. Cable length: 48 + 2 m Cable: AT-N05V3V3-F 3G1,5 Cable quality: BREMAXX® Cable colour: Red Reel-Ø: 290 mm

For short-term use outdoors, IP 44. Extension cable reel with plug and trailing socket. Cable reel with 2 m cable for connecting to the power source. With the unique Bretec® Anti Cable Twist System for comfortable working. Reel body made from special plastic fitted to a galvanised steel tube frame. Innovative and ergonomic cable guide handle "cable pilot" for perfect cable-management during winding. Handle commutes on both sides and allows easy carrying and cable storage. For right and left handed easy to rewind. With hinged rotary handle for comfortable rolling up. The BREMAXX® cable is extremely sturdy, highly flexible even at low temperature down to -35 ºC, oil- and UV-resistant and highly abrasion-resistant. Thermal cut-out protection, indicator shows overheating or overloading. Design protected. Patent pending. Cable length: 23 + 2 m Cable: AT-N05V3V3-F 3G1,5 Cable quality: BREMAXX® Cable colour: Red Reel-Ø: 240 mm

For universal outdoor use according to BGI 608 and use permanent on sites, IP 44. With the perfect Quick & Easy Rewind System ROL´UP and the unique Bretec® Anti Cable Twist System. Reel body made from special plastic fitted to a galvanised steel tube frame. Innovative and ergonomic cable guide handle "cable pilot" for perfect cable-management during winding. Handle commutes on both sides and allows easy carrying and cable storage. For right and left handed easy to rewind. Rotary handle for comfortable rolling up. RN cable is approved to exacting site standards as per VDE 0100 part 704. 3 water-jet protected earthed socket outlets with self-closing protective caps. Thermal cut-out protection, indicator shows overheating or overloading. Design protected. Patent pending. Cable length: 40 m Cable: H07RN-F 3G1,5 Cable quality: Rubber-Neoprene Cable colour: Red Reel-Ø: 290 mm

For universal outdoor use according to BGI 608 and use permanent on sites, IP 44. Extra stable, shock-absorbing steel tube frame with galvanised steel tube, exclusive stability. Carry handle with comfortable cable guide management during winding. Reel body made of special plastic with reinforced ribbed structure. Rotary handle for comfortable rolling up. The BREMAXX®-PUR cable (BQ cable) is highly resistant to abrasions, crushing, UV light, cutting and tearing. In addition, it is accid-proof, oil-resistant, wheatherproof and microbe-resistant. Remains highly flexible even at low temperature down to -40 °C. BQ cable (PUR) is approved to exacting site standards as per VDE 0100 part 704. 3 water-jet protected earthed socket outlets with self-closing protective caps. Thermal cut-out protection, indicator shows overheating or overloading. Cable length: 40 m Cable: H07BQ-F 3G1,5 Cable quality: BREMAXX®-PUR Cable colour: Orange Reel-Ø: 290 mm

For universal outdoor use according to BGI 608 and use permanent on sites, IP 44. Extra stable, shock-absorbing steel tube frame with galvanised steel tube, exclusive stability. Carry handle with comfortable cable guide management during winding. Reel body made of special plastic with reinforced ribbed structure. Rotary handle for comfortable rolling up. The BREMAXX®-PUR cable (BQ cable) is highly resistant to abrasions, crushing, UV light, cutting and tearing. In addition, it is accid-proof, oil-resistant, wheatherproof and microbe-resistant. Remains highly flexible even at low temperature down to -40 °C. BQ cable (PUR) is approved to exacting site standards as per VDE 0100 part 704. 3 water-jet protected earthed socket outlets with self-closing protective caps. Thermal cut-out protection, indicator shows overheating or overloading. Cable length: 25 m Cable: H07BQ-F 3G1,5 Cable quality: BREMAXX®-PUR Cable colour: Orange Reel-Ø: 240 mm

ELKY special cables pass a strict manufacturing and cleaning process, in accordance with medical industry standards. Fundamentally, we only supply low twist and low tension wires and cables with a clean, high sheen, regular surface finish. We deliver manufactured products with extruded insulation made from bio-compatible materials. As well as the standard materials 1.4301 (AISI 304), 1.4310 (AISI 301), 1.4401 (AISI 316), 1.4404 (AISI 316L) and 1.4441 (AISI 316LVM), all other cabling materials authorised for use can be supplied coated and un-coated. Applications: - Guide cables e.g. for stomach tubes - Hollow cables - Strands for Temporary Myocardial Pacing Wires (monopolar, bipolar and quadripolar) - Surgial cutting strand for example for sternal closure - Strands for vein eraser - Surgical cutting strands - Wire and cables for endoscopic applications - Wire and cables for orthopaedic applications