Building%20materials - Import export

High performance, environmentally friendly silicate mortar for sewage water areas. Extreme resistance against chemicals in the range of pH 0 – 14. Maleki-SBS 860 is ideal for protecting mineral surfaces against corrosive influences. Both existing and new concrete surfaces can be protected for longer against stresses that occur. The material is an ideal supplement for work in higher layer thicknesses and can be used in combination with Maleki-SWP 270. Packaging unit: 15 kg bucket with 3x 5 kg LDPE bags (360 kg / pallet), 5 kg LDPE bags in a pallet carton (500 kg / pallet) – Article-No.: 1520

Flexible, crack-bridging two-component waterproofing. As a flexible waterproofing in interior and exterior areas for the creation of a waterproof coating on concrete or other cementitious substrates. Maleki-DS 250 Flex is a universally applicable flexible Waterproofing slurry for a wide range of applications. Due to its high waterproofness and resistance, it can even be used with corrosive media. Packaging unit: 10 kg bucket, 240 kg per pallet, other packaging sizes on request – Article-No.: 1315

Versatile silicate sealant for mineral wall and floor surfaces. Ideal for polished substrates. The material only forms very thin layers which does not affect the look and feel of high-quality mineral surfaces like Terrazzo floors. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 5 kg canister (300 kg / pallet), 30 kg canister (540 kg / pallet), 1000 kg IBC – Article-No.: 1811

Abrasion resistant sealant for industrial floors with high surface strength. Increases the chemical resistance of the substrate. Maleki-VS 930 is also used as a system product for unpolished Lithokor design floors. Packaging unit: 7 kg container (single), other packaging sizes on request – Article-No.: 1828

Shrinkage-free fast-setting mortar for construction. Hardens fast and with low tension. Can be mixed with quartz sand for higher layer thickness. Maleki-VM 530 is ideal for filling holes and cavities. Due to the rapid setting of the mortar, surfaces can be prepared quickly and cost-effectively for further coating work. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 25 kg paper bag, 1050 kg per pallet – Article-No.: 1442

High performance and extreme acid resistant mortar for protection of mineral substrates in acid-proof installations and industrial areas. Extreme high chemical resistance at the range of pH 0 – 14 according to EN 12808. Maleki-TPC 200 sets new standards in the protection of mineral surfaces against high acid loads and extreme thermal stresses. Maleki-TPC 200 can withstand both concentrated acids and temperatures of up to 1350°C. Both existing and new concrete surfaces can thus be permanently protected. Packaging unit: 15 kg bucket with 3x 5 kg LDPE bags (360 kg / pallet), 5 kg LDPE bags in a pallet carton (500 kg / pallet) – Article-No.: 1310

Solvent-free deep penetrating primer to reduce the absorbency of mineral substrates. Versatile primer for various applications. Maleki-TG 110 is used as a system product in all product systems and ensures a bubble-free surface with improved adhesion to the substrate. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 5 kg canister (300 kg / pallet), 30 kg canister (540 kg / pallet), 1000 kg IBC – Article-No.: 1110

White binder for self-compacting Terrazzo floors. Hardens fast and with low tension with a layer thickness of up to 60 mm. Maleki-Terrazzo Binder is part of our Lithokor design system. Lithokor design products give every room a unique design and ensure a healthy indoor climate. Maleki-Terrazzo Binder can be used to create individual and unique decorative floor surfaces. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 25 kg paper bag, 1050 kg per pallet – Article-No.: 1448

Innovative waterproofing with high chemical resistance for canal and industrial construction. Waterproof up to 1.5 bar at a layer thickness of 4 mm. Maleki-SWP 270 is ideal for protecting mineral surfaces against corrosive influences. Both existing and new concrete surfaces can be protected against stress for longer against stresses that occur. Packaging unit: 15 kg bucket with 3x 5 kg LDPE bags (360 kg / pallet), 5 kg LDPE bags in a pallet carton (500 kg / pallet) – Article-No.: 1312

Self-leveling industrial floor for high chemical and thermal load. Class C50-F10-A12 according to EN 13813. Hardens fast and with low tension with a layer thickness of 2 – 50 mm. Maleki-IFS 500 is the perfect solution for areas with the highest demands on mechanical, chemical and thermal resistance. Choose for quality, sustainability and performance with Maleki-IFS 500. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 25 kg paper bag, 1050 kg per pallet – Article-No.: 1435

Self-leveling industrial floor of strength class C50-F10-A9 in accordance with EN 13813. Hardens fast and with low tension with a layer thickness of 2 – 50 mm. Maleki-IFS 400 is the perfect solution for areas with the highest demands on resilience and environmental protection. Choose for quality, sustainability and performance with Maleki-IFS 400. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 25 kg paper bag, 1050 kg per pallet – Article-No.: 1410

Chemical resistant epoxy coating. Can be used as a primer and as a sealer. As a system product for the CP OS 8 car park deck coating, Maleki-EP 150 is a tested solution of class OS 8 in accordance with TR "Maintenance of concrete structures". Maleki-EP 150 stands for high-quality surface protection that meets the requirements of car parks and multi-storey car parks. Packaging unit: 6 kg combined container, 24 kg container (single) – Article-No.: 1809

Innovative silicate densifier. Protects against penetrating moisture and chemical stress. Maleki-DW 100 can be used universally to protect cementitious surfaces. The material does not form layers and does not affect the diffusion permeability of the mineral substrate. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 5 kg canister (300 kg / pallet), 30 kg canister (540 kg / pallet), 1000 kg IBC – Article-No.: 1815

One-component mineral waterproofing slurry. For the preparation of a waterproof coating on concrete and other cementitious substrates. Maleki-DS 220 is a universal waterproofing mortar for a wide range of applications. Thanks to its high waterproofness and durability, it can be used even under the most difficult conditions. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 25 kg paper bag, 1050 kg per pallet – Article-No.: 1314

Self-leveling design floor coating of class C40-F10-A12 in accordance with EN 13813. Hardens fast and with low tension in a layer thickness of 2 – 40 mm. Maleki-DFS 430 is part of our Lithokor design system. Lithokor design products give every room a unique design and ensure a healthy indoor climate. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 25 kg paper bag, 1050 kg per pallet – Article-No.: 1433

White or colored, self-leveling design floor of class C40-F10-A12 according to EN 13813. Hardens fast and with low tension in a layer thickness of 1 – 30 mm. Maleki-DFS 410 is part of our Lithokor design system. Lithokor design products give every room a unique design and ensure a healthy indoor climate. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 25 kg paper bag, 1050 kg per pallet – Article-No.: 1415

Easy-to-use, self-leveling floor coating of strength class C35-F7-A22 in accordance with EN 13813. Hardens with low tension in a layer thickness of 2 – 50 mm. Maleki-BV 310 is ideal for surfaces where a cost-effective solution is required. Suitable both as a levelling layer and as a final coating for lighter loads. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 25 kg paper bag, 1050 kg per pallet – Article-No.: 1412

Self-leveling, flexible floor mortar for critical substrates. Can be used as an intermediate layer on cracked surfaces. Maleki-FS 440 is used wherever cracked substrates make processing with conventional levelling compounds impossible. The treated surfaces can then be further coated with Maleki floor levelling compounds, depending on the intended use. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 25 kg paper bag, 1050 kg per pallet – Article-No.: 1413

Innovative silicate impregnation and subsoil consolidation. Protects against penetrating moisture in masonry and concrete. Maleki-LL 100 can be used universally to protect cementitious surfaces. The material does not form layers and does not affect the diffusion permeability of the mineral substrate. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 5 kg canister (300 kg / pallet), 30 kg canister (540 kg / pallet), 1000 kg IBC – Article-No.: 1810

Versatile environmentally friendly repair mortar for concrete and masonry. For repair and coating work. Maleki-RM 500 is ideal for filling holes and cavities, especially on wall surfaces. Due to the rapid setting of the mortar, surfaces can be prepared quickly and cost-effectively for further coating work. Packaging unit: 25 kg paper bag, 1050 kg per pallet – Article-No.: 1416

Innovative and environmentally friendly smoothing mortar. Hardens fast and with low tension with layer thickness up to 30 mm. Maleki-SM 735 is part of our Lithokor design system. Lithokor design products give every room a unique design and ensure a healthy indoor climate. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 25 kg paper bag, 1050 kg per pallet – Article-No.: 1515

Self-leveling flowing screed of strength class C40-F7 in accordance with EN 13813. Hardens with low tension with a layer thickness of 5 – 70 mm. Maleki-FEC 370 is ideal for surfaces where a cost-effective solution for higher layer thicknesses is required. The treated surfaces can then be further coated with Maleki floor levelling compounds, depending on the intended use. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 25 kg paper bag, 1050 kg per pallet – Article-No.: 1429

For civil engineering use, for bracing and supporting canal walls, acc. to DIN 4124 with test label TBG-4P 32. To combine the spindle with tubes of different length, the ring can be opened by special tool.

Integral to every building, the aluminum facade is not only the outward face that the structure presents to the world, but also the statement that face makes to those both inside and out. Equally important today are the ease and economics of construction, as well as lifespan and environmental responsibility. Novelis aluminum building materials, both pre-painted and anodized, offer architects and builders the freedom to create striking, memorable and sustainable structures that last for decades. Novelis aluminum building materials come in a wide variety of colors, allowing the flexibility for structures to stand out, blend in to surroundings or even change their appearance depending on the light. In addition, easy processing and superior formability make shapes possible that can reflect the building’s purpose and the activities within, whether that’s a memorial to the Titanic in Ireland or a shopping center in Moscow.

The Tacti Cut S 50 allows for fast cuts in standard building materials like concrete, brick, and masonry, making it versatile for a wide range of applications. A good value for its high output power. Safety and stability are ensured, as the blade was developed and manufactured in compliance with the EN13236 standard and the ISO 9001 quality standard.

Features • The original all-purpose wall plug - often copied, but never equalled • Holds in almost all building materials • Ties or expands automatically depending on the building material • No turning in the drill hole • Pre-positioned and push-through installation Description & Area of Application • 3-way split wall plug body without wall plug cap • Anti-rotation locks on wall plug neck and wall plug body prevent rotation in the building material • Tri + Screw: Countersunk screw with PZ driver

Features • Wall plug cap protects the surface and prevents slipping deeper into the drill hole • Holds in almost all building materials • Ties or expands depending on the building material • Anti-rotation locks prevent rotation in the drill hole • Suitable for pre-positioned installation Description & Area of Application • All-purpose wall plug for almost all building materials • 3-way split wall plug body with wall plug cap • Anti-rotation locks on wall plug neck and wall plug body prevent rotation in the building material • Trika + screw: Countersunk screw with PZ driver

Features • Screws can be screwed in very easily due to the special geometry • Wall plug cap protects the surface to prevent slipping deeper into the drill hole • Ties or expands automatically depending on the building material • Detachable wall plug cap for prepositioned and push-through installation Description & Area of Application • All-purpose wall plug for almost all building materials • 4-way split wall plug body for uniform force distribution • Anti-rotation locks on wall plug neck prevent rotation in the building material • Deco + Screw: Screw with PZ driver

Packaging bucket for transport, packaging and storing of various materials. Suitable for the food or building material industries and non-aggressive chemicals in environmental protection, hospitals and the household. With strong handle. Quality closure on the bucket for product safety.