Zinc steel - Import export

These parts used for mechanical .

This is the parts use in priter accessories, main suopprt bracket.

This is the parts used for printer accessories.

Sturdy and practical galvanized or stainless steel linear rails with radial ball bearing sliders. The X-Rail is a family of linear guides with radial ball bearing sliders for applications requiring cost efficiency and high resistance to corrosion. The shaped raceway rail, the flat raceway rail and the telescopic rail are available in stainless steel or galvanized sheet metal. With the T + U configuration, the X-Rail system can compensate for any axial misalignment in parallelism of the mounting surfaces. Three rail width sizes: 20mm, 30mm and 45mm Standard rail lengths up to 3,120mm; different lengths upon request Low coefficient of friction Combination of T and U rails for self-aligning bearing applications Easily adjustable slider preload Polymer based wipers available for added roller bearing protection (available on for the thin body style slider) High temperature resistance up to 120°C/250°F The stainless steel X-Rail linear guide version is corrosion resistant, and ensures...

Sturdy and practical linear rails with radial ball bearing sliders. The X-Rail is a family of linear guides with radial ball bearing sliders for applications requiring cost efficiency and high resistance to corrosion. The linear guides with shaped raceways and the linear guides with flat raceways are available in stainless steel or galvanised or nitrided metal sheeting. With the T + U configuration, the X-Rail system can compensate for any axial misalignment in parallelism of the mounting surfaces.

steel, zinc plated*Ø 12 mm*

steel, zinc plated*threaded M 10*Ø 12 mm

screws: nickel plated steel*zinc diecasting*for rods up to 16 mm Ø

Tie chain with plastic tube

Key chain with hook and key ring

Key chain with hook and key ring

Lancing chain with 2 D-Rings and one round ring

Lead chain with snap hook and movable, straight swivel

Key chain with snap hook and key ring

zinc plated or stainless steel

height adjuster M10 steel yellow, zinc plated fot plate Ø36mm

Levers ▪ Straight and off-set design available ▪ Made of zinc, steel, stainless steel or aluminium Locking Devices ▪ Various designs and configurations available, depending on the actual type and size of the ball valve ▪ Universal field-installed devices avaibale Pneumatic Actuators ▪ Single- or double-acting Limit Switches

Designed to be used as filler ports for hydraulic reservoirs, allowing the reservoir to breathe whilst protecting it from contamination found in harsh environments Types ▪ SMBT-47 (Screw-in version; Cap Ø 47 mm / 1.85 in) ▪ SMBB-47 (Bayonet version; Cap Ø 47 mm / 1.85 in) ▪ SMBT-80 (Screw-in version; Cap Ø 80 mm / 3.15 in) ▪ SMBB-80 (Bayonet version; Cap Ø 80 mm / 3.15 in) ▪ SMBP-80 (Push-on version; Cap Ø 80 mm / 3.15 in) Materials ▪ Breather cap made of Steel, zinc/nickel-plated (Fe/Zn Ni 6) and free of hexavalent chromium CrVI (standard option); chrome-plated and epoxy-coated versions available ▪ Bayonet flange made of Steel, zinc-plated ▪ Basket made of Steel, zinc-plated or Polyamide (PA) ▪ Dipstick adaptor made of Polyamide (PA) ▪ Sealings made of Cork (for filler breathers without pressurisation) or NBR (Buna-N®) (for pressurised filler breathers) ▪ Metal basket ▪ Plastic basket ▪ Pressurisation up to 0,7 bar / 10 PSI ▪ Air filter element ▪ Locking feature ▪ Dipstick...

Material Brass and Carbon Steel Surface Finishing Carbon Steel: Zinc-Plating and Thick-Film-Passivation (Chrome III) Standard Seal Material(s) NBR (Buna-N®) Working Temperature -25° C ... +100° C / -13° F ... +212° F Valve Design Flat Valve Connection Screw Disconnection Screw Connect Under Pressure not allowed Application Industrial Hydraulic ISO Interchange -

Nominal volume: 10 L + with folding, zinc-plated, corrosion-protected steel wire carrying handle + resistant to frost, heat, UV radiation and chemicals + available in green and brown + integrated stacking ribs allow for stacking of the trash/garbage cans + the container’s smooth surfaces are easy to clean + environmental protection: Our pre- sorting containers can be fully recycled at the end of their useful life.

Adjustable Gauge Fitting EMV ▪ Fixed mounting of a pressure gauge without a test coupling ina existing port connection Materials - Metal parts made of: ▪ Steel, zinc/nickel-plated = C6F (CrVI-free) ▪ Stainless Steel V2A (1.4305 / AISI 303) or V4A (1.4571 / AISI 316Ti) on request Sealings made of: ▪ P = NBR (Buna-N®) or V = FPM (Viton®) Gauge Adaptor SMA Direct Gauge Adaptor SMD

Material Carbon Steel Surface Finishing Zinc-Nickel Standard Seal Material(s) NBR (Buna-N®) Working Temperature -25° C ... +100° C / -13° F ... +212° F Valve Design Poppet Valve Connection Screw Disconnection Screw Connect Under Pressure not allowed Application Industrial Hydraulic ISO Interchange -

White Zinc Plated Steel Hinge,Opening angle 120°,ROHS compliance

SANHA®-Heat Distribution cabinet, surface-mounted, galvanically zinc-coated steel sheet, painted white (RAL 9010), with removable door and locking bolt, installation depth 125 mm.

Bright chrome-plated ZDC housing and insert, white zinc-plated steel cam,Head Diameter Ø22,Door Cutout: Ø19.5*16.5mm,Easy Installation,ROHS compliance

75mm Length, 90°hinge,both Zinc Alloy and Stainless Steel versions available,ROHS compliance

Zinc Alloy and Stainless Steel versions available,Opening angle 180°,ROHS compliance

Zinc Alloy and Stainless Steel versions available,1333key or Non-locking version,Door Cutout: Ø22.5*20.1mm,Easy Installation,ROHS compliance

Zinc Alloy and Stainless Steel versions available,1333key or Non-locking version,Door Cutout: Ø22.5*20.1mm,Easy Installation,ROHS compliance