Wire ropes - Import export

secutex protection also for wire ropes secutex protective sleeves in combination with Spanset lifting slings are always the best choice for lifting machinery elements and other loads. Because of the design, the lifting slings are wide, the load is distributed over a relatively large area. But sometimes secutex protective sleeves are also required for wire ropes. The wire ropes have an almost round diameter, the surface area to the load is rather small and the stress per area is high. In general, the use of wire rope sleeves can only be recommended for the lifting of large, round loads, i.e. without sharp or angular edges. There are slotted and also unslotted secutex wire rope protective sleeves available for one or two strands. The slotted variants can easily be assembled afterwards, the closed types, on the other hand, have to be installed during the manufacture of the wire ropes. Please note that the wire ropes often have a larger diameter than the nominal size

round wires for crane ropes, lift ropes, lifting systems, mining ropes, forestry applications, architectural ropes, ropes for automotive and aviation, special ropes for offshore technology, profile wires for special applications, fully locked / semi-locked ropes for tensioning systems, mountain railways, transport systems, profile wires for reinforcements in the offshore sector.

• For cutting wire ropes and steel wire without any burr or splaying • For wire ropes 1570 N/mm² • Cutting edges inductively hardened • With optimum leverage for easy and effortless work • Handles made of precision steel tube • Insulation according to DIN EN/IEC 60900

Wire rope clips formerly acc. to DIN 1142 Have attention to the note in the download area. * The nominal size corresponds to the maximum rope diameter. ** The minimum quantity refers to the required number (acc. to DIN) of wire rope clips. *** similar to DIN

Wire rope clips similar to DIN 741 for minor purposes * The nominal size corresponds to the maximum rope diameter. ** The minimum quantity refers to the required number (acc. to DIN) of wire rope clips.

Wire rope clips with shortened bracked to safe the dead end of ropes at asymetric wedge sockets * The nominal size corresponds to the maximum rope diameter.

Simplex-, Duplex-clamps, wire rope clips, various turnbuckles, thimbles made from stainless steel

Wire rope clip similar DIN 741 Simplex-, Duplex-clamps, wire rope clips, egg shaoed wire rope clips, varous turnbuckles,thimbles, rope shortenings made from steel and ferrules made from aluminium

Wire rope clip similar DIN 1142 Simplex-, Duplex-clamps, wire rope clips, egg shaoed wire rope clips, varous turnbuckles,thimbles, rope shortenings made from steel and ferrules made from aluminium

Simplex-, Duplex-clamps, wire rope clips, egg shaoed wire rope clips, varous turnbuckles,thimbles, rope shortenings made from steel and ferrules made from aluminium

Simplex-, Duplex-clamps, wire rope clips, egg shaoed wire rope clips, varous turnbuckles,thimbles, rope shortenings made from steel and ferrules made from aluminium

Simplex-, Duplex-clamps, wire rope clips, various turnbuckles, thimbles made from stainless steel

Simplex-, Duplex-clamps, wire rope clips, various turnbuckles, thimbles made from stainless steel

Turnbuckle (available with hook+eye/eye+eye - hook+hook on request) Simplex-, Duplex-clamps, wire rope clips, various turnbuckles, thimbles made from stainless steel

Hanging distributor HV1006 made of stainless steel with 6 units: three Schuko sockets with VDE certification, one CEE 5/16A 400V/6h socket with VDE certification, one RJ45 double CAT6A and a compressed air coupling. Ideal for use in workshops. The hanging distributor HV1006 is delivered with hooks and carabiners (without cables, hoses and wire ropes shown).

Threaded rods for wedge sockets in special design ATTENTION: The strength of the threaded rod must be in accordance to the strength of the wire rope. Other dimensions on request!

Eyelet bolts Eyebolts with larger eye (forged) ATTENTION: The strength of the eyelet bolt must be in accordance to the strength of the wire rope. * Please indicate length of thread with your order

Wedge sockets acc. to DIN 43148 hot-dip galvanized surface The wedge sockets are not suitable for the use in areas liable to frost. ATTENTION: The strength of the eye bolt must be in accordance to the strength of the wire rope. * out of standard Please find certificates and instructions in our download area:

Eye bolts acc. to DIN 444 with property class 8.8 for applications with high-tensile bearing means surface black passivated ATTENTION: The strength of the eye bolt must be in accordance to the strength of the wire rope. Item-no.: S05 00XX A0 ### 444 Insert the thread size for XX and the bold length for ### in the item-no. Other dimensions on request!

Eye bolts acc. to DIN 444 galvanized surface ATTENTION: The strength of the eye bolt must be in accordance to the strength of the wire rope. * not acc. to DIN 444 ** Item-no.: S01 0020 A0 ### 000 *** Item-no.: S01 0027 A0 500 000 Item-no.: S01 00XX A0 ### 444 Insert the thread size for XX and the bold length for ### in the item-no.

Rope sockets formerly acc. to DIN 15315 but made of stainless steel, polished (material no.:1.4571/inox) ATTENTION: The strength of the eye bolt must be in accordance to the strength of the wire rope. All dimensions similar to rope sockets for lifts acc. to DIN EN 13411-7. Please find instructions in our download area:

Rope suspensions with wedge sockets in special design ATTENTION: The strength of the threaded rod must be in accordance to the strength of the wire rope. L2 =Standard lengths of the threaded rods are in mm, further lengths possible When ordering, the required length of the eye bolts is to be incorporated into the item-no as per following example: rope suspension type A for 8 mm rope diameter and a threaded rod of 310 mm: KG1 0800 A0 310 SSN

Rope suspensions with wedge sockets in special design ATTENTION: The strength of the threaded rod must be in accordance to the strength of the wire rope. L2 = Standard lengths of the eye bolts are in mm, further lengths possible When ordering, the required length of the eye bolts is to be incorporated into the item-no as per following example: rope suspension type A for 8 mm rope diameter and a threaded rod of 310 mm: KG1 0800 A0 310 SSN

Rope suspensions with wedge sockets acc. to DIN 43148 The wedge sockets acc. to DIN 43148 are not suitable for the use in areas liable to frost. ATTENTION: The strength of the eye bolt must be in accordance to the strength of the wire rope. L2 =Standard lengths of the eye bolts are in mm, further lengths possible When ordering, the required length of the eye bolts is to be incorporated into the item-no as per following example: rope suspension type A for 9 mm rope diameter and an eye bolts length of 800 mm: KK2 0912 A0 800 148

Rope suspensions with wedge sockets acc. to DIN EN 13411-6 ATTENTION: The strength of the eye bolt must be in accordance to the strength of the wire rope. L2 =Standard lengths of the eye bolts are in mm, further lengths possible When ordering, the required length of the eye bolts is to be incorporated into the item-no as per following example: rope suspension type A for 18 mm rope diameter and an eye bolts length of 800 mm: KK2 1800 A0 800 411

Rope suspensions with wedge sockets acc. to DIN 43148 The wedge sockets are not suitable for the use in areas liable to frost. ATTENTION: The strength of the eye bolt must be in accordance to the strength of the wire rope. L2 =Standard lengths of the eye bolts are in mm, further lengths possible When ordering, the required length of the eye bolts is to be incorporated into the item-no as per following example: rope suspension type A for 9 mm rope diameter and an eye bolts length of 800 mm: KK2 0912 A0 800 148

Rope suspensions with rope sockets acc. to DIN EN 13411-7 ATTENTION: The strength of the eye bolt must be in accordance to the strength of the wire rope. * Spring buffers only without collar, similar to picture L2 = Standard lengths of eye bolts are in mm, further lengths possible When ordering, the required length of the eye bolts is to be incorporated into the item-no as per following example: rope suspension type A for 8 mm rope diameter and an eye bolts length of 450 mm: SS1 0608 A0 450 315

Rope suspensions with rope sockets acc. to DIN EN 13411-7 ATTENTION: The strength of the eye bolt must be in accordance to the strength of the wire rope. * upon request only L2 =Standard lengths of the eye bolts are in mm, further lengths possible When ordering, the required length of the eye bolts is to be incorporated into the item-no as per following example: rope suspensions type A for 8 mm rope diameter and an eye bolts length of 450 mm: SS1 0608 A0 450 315

Wedge sockets in special design with screw galvanized surface With type testing similar to EN 13411-6 ATTENTION: The strength of the threaded rod must be in accordance to the strength of the wire rope. material: G20Mn5N * material: GE240 ** material: GGG50 DIN 1693 *,** The standard design of these wedge sockets is not suitable for the use in areas liable to frost. Designs with a guaranteed impact test at lower temperatures are deliverable on request. Please find certificates and instructions in our download area: