Weights - Import export

— Stable dust-tight design for harsh industrial conditions — Removable doors for quick cleaning — Usable as a continuous or batch-wise metering belt feeder or for throughput metering (operating mode can be changed on the controller) Power range of the belt feeders DBW350 - 100-20000 dm³/h DBW600 - 200-50000 dm³/h DBW800 - 500-100000 dm³/h

— Stainless steel hopper with stirring — agitator for consistent screw filling and mass flow of ingredient — 3 phase AC gear motors — Interchangeable screws and screw tubes allowing quick adjustment to changing ingredients and feed rates Power range 1-298 dm³/h

— Feeder ideal for difficult flowing, sticky or floodable bulk ingredients at mid feed rates — Separate screw and agitator motors (3 phase AC gear motors), except models MT and DDSR20 — Interchangeable screws and screw tubes allowing quick adjustment to changing ingredients and feed rates Power range - Different Versions 4-2693 dm³/h 20 - 2693 dm³/h

— Loss-in-weight feeder for powders and pellets — Stainless steel hopper with stirring — agitator for consistent screw filling and mass flow of ingredient — Separate screw and agitator motors (3 phase AC gear motors), — Interchangeable screws and screw tubes allowing quick adjustment to changing ingredients and feed rates Power range - Different Versions 4-3743 dm³/h 20-3743 dm³/h

— Details depend on the characteristics of the medium to be fed (density, viscosity, solids content, temperature, reactivity, toxicological properties, etc.) and the respective process requirements (accuracy, feed rate, turndown ratio, counterpressure, etc.) —Applicable feed pumps: piston, diaphragm, gear, hose, rotary piston or eccentric screw pumps, etc. — High-tech weighing system with digital load cell DigiMASS-2 for high weighing accuracy — Heated versions available (electrical, hot water, thermal oil, etc.) Power range - Different Versions 1 - 1000 dm³/h 50 - 5000 dm³/h 100-10000 dm³/h

Other information Series 14040 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 14240 Inner height hi: 62 mm Inner widths Bi: 50 - 400 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Serie 14550 Inner height hi: 70 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 600 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 15050 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Serie 15250 Inner height hi: 86 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 14140 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 14340 Inner height hi: 62 mm Inner widths Bi: 50 - 400 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Serie 14650 Inner height hi: 70 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 600 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 15150 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Serie 15350 Inner height hi: 86 mm Inner widths Bi: 50 - 400 mm bending radii R: 150 - 600 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series R18840 Inner height hi: 56 mm Inner widths Bi: 75 - 462 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Tube, swivel lid Series R19050 Inner height hi: 70 mm Inner widths Bi: 50 - 600 mm bending radii R: 200 - 600 mm Pitch: 91 mm E-Tube, swivel lid Series R19850 Inner height hi: 80 mm Inner widths Bi: 75 - 462 mm bending radii R: 200 - 500 mm Pitch: 91 mm E-Tube, swivel lid Assembly tool for E4-series For the practical opening and closing of the E4 series. Big savings in assembly time Assembly tool for E4-series Special design Electrically conductive ESD/ATEX versions on request "Mounted on the side" unsupported application possible High torsionalstiffness Other information Series 14040 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 14240 Inner height hi: 62 mm Inner widths Bi: 50 - 400 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Serie 14550 Inner height hi: 70 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 600 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 15050 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Serie 15250 Inner height hi: 86 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 14140 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 14340 Inner height hi: 62 mm Inner widths Bi: 50 - 400 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Serie 14650 Inner height hi: 70 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 600 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 15150 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Serie 15350 Inner height hi: 86 mm Inner widths Bi: 50 - 400 mm bending radii R: 150 - 600 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series R18840 Inner height hi: 56 mm Inner widths Bi: 75 - 462 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Tube, swivel lid Series R19050 Inner height hi: 70 mm Inner widths Bi: 50 - 600 mm bending radii R: 200 - 600 mm Pitch: 91 mm E-Tube, swivel lid Series R19850 Inner height hi: 80 mm Inner widths Bi: 75 - 462 mm bending radii R: 200 - 500 mm Pitch: 91 mm E-Tube, swivel lid Assembly tool for E4-series For the practical opening and closing of the E4 series. Big savings in assembly time Assembly tool for E4-series E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Joining, separating and opening of the E-Chain® and E-Tubes. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. E4/light New E4/light version with the proved and tested "tongue and groove" system of the Series E4/4 Low weight Optimized interior-exterior dimensions ratio Cost efficient Manifold interior separation potentials Large accessory kits Thin external links Max. travel distance: 150 - 400 m Typical industrial sectors and applications Machine tools (closed E4/light tubes and open E-Chain®) Material processing Stone cutting machines Woodworking machines General mechanical engineering Vehicles Construction machinery Limited application of long travels Special design Electrically conductive ESD/ATEX versions on request "Mounted on the side" unsupported application possible High torsionalstiffness

Vibration dampers of the series GAB are especially used to stabilize your pipe system. You can use these elements to absorb thermal expansion of the pipes, too. These elements are often used in the field of plant engineering. Depending on the chosen series you are able to couple your system with this elements by a welding profile or a fork head. RG+ offers these suspensions in the following designs: GAB-( )-2 with one fork head on each site GAB-( )-5 with one fork head on one site and a welding profile on the other

This prongprotection shoe with textile fabric insert is lightweight and designed for special and flexible use. It is placed on the fork prongs. The prongprotection shoe is optionally available with a textile fabric insert and with fastening brackets. Surface structures We offer special surfaces for exceptional applications under the influence of water, oil or ice. Speak with your professional consultant today!

— Universal loss-in-weight feeder for virtually all flowable ingredients (powders, pellets, flakes, fibers, etc.) — Flexible polyurethane hopper agitated by amplitude adjustable paddles for consistent screw filling and mass flow of ingredient without degradation — Interchangeable screws and screw tubes allowing quick adjustment to changing ingredients and feed rates — Optional separate paddle motor to allow paddle speed adjustment for difficult flowing ingredients (not available for FW20) Power range - Different versions 1-25570 dm³/h

— Universal loss-in-weight feeder for virtually all flowable ingredients (powders, pellets, flakes, fibers, etc.) — Flexible polyurethane hopper agitated by amplitude adjustable paddles for consistent screw filling and mass flow of ingredient without degradation — Interchangeable screws and screw tubes allowing quick adjustment to changing ingredients and feed rates — Optional separate paddle motor to allow paddle speed adjustment for difficult flowing ingredients (not available for FW20) Power range 1-75 dm³/h

— Feeder ideal for difficult flowing, sticky or floodable bulk ingredients at mid feed rates — Separate screw and agitator motors (3 phase AC gear motors), except models MT and DDSR20 — Interchangeable screws and screw tubes allowing quick adjustment to changing ingredients and feed rates Power range 50-7500 dm³/h

* Loss-in-weight FiberXpert feeder for long and uneven fibers (natural fibers, wood fibers, carbon fibers, etc.)* Also suitable for film chips and shredded film strips cut off by film edge trimmers * Technical features: special fiber screw, large steep walled hopper, novel design and special position of the stirring agitator in the hopper * High-tech weighing system with digital load cell or * high-resolution strain gauge load cell for high weighing accuracy Power range 200-19900 dm³/h

• For loosening, cutting and attaching balance weights • For opening and pressing together the retaining springs • With cutting edge for separating the balance weights • Made of special tool steel, forged, oil-hardened

— Stainless steel hopper with stirring — agitator for consistent screw filling and mass flow of ingredient — Separate screw and agitator motors (3 phase AC gear motors), — except model DSR28 — Interchangeable screws and screw tubes allowing quick adjustment to changing ingredients and feed rates Power range 50-7088 dm³/h

— No stirring agitator or other rotating parts for ingredient flow without degradation — Vibration amplitude feedback ensuring linear conveyance characteristics over the entire feed rate range Power range - Different versions DVT45 - 10 - 450 dm³/h DVT60 - 20 - 1000 dm³/h DVT120 - 300 - 3000 dm³/h DVT20 - 650 - 6500 dm³/h

• Very slim, light-weight construction for shirt or coat pocket, with clip • For almost all common closures • Key profile for these applications: heating and sanitary installations, air-conditioning and ventilation, industry, building technology, e.g. doors & windows in new buildings, locking systems, technical installations and many more • Bit (1/4") made from high-quality tool steel and specially hardened • Universal 1/4" bit holder for standard bits, with permanent magnet to hold bit in place • The twist mechanism allows three different profiles to be activated. • With ultra-bright LED torch in the clip • Made of reinforced fibreglass plastic • Made of zinc casting (GD-Zn)

• Very slim, light-weight construction for shirt or coat pocket, with clip • Universal key for almost all common switch cabinets & closures • Key profile for these applications: electrical engineering, heating and sanitary installations, air-conditioning and ventilation, industry, building technology, e.g. switch cabinets, mains switchboards, locking systems, technical installations and many more • Bit (1/4") made from high-quality tool steel and specially hardened • Universal 1/4" bit holder for standard bits, with permanent magnet to hold bit in place • With ultra-bright LED torch in the clip • The twist mechanism allows four different profiles to be activated. • Made of reinforced fibreglass plastic • Made of zinc casting (GD-Zn)

The corrosion resistance of Neodymium magnet is considered poor, surface coating is highly recommended for Neodymium magnets. With the expansion of elevators, wind turbines and permanent motors application, the users need higher requirement on corrosion resistance of Neodymium magnet, as the glue cohesiveness of unplated magnet is much better than plated magnets, also unplated products are better in the security. Now, more and more customers tend to use unplated magnets, upon this condition we have developed ultralow weight loss magnets after the continuous innovation and study. Normally, the weight loss test is over 150mg/cm² in the industry of Neodymium magnet, this will be different for magnets produced from different material formulation and manufacturing process. A lot of our new magnets can reach to 1mg/cm², (Testing condition HAST standard for 168hrs), due to its very low weight loss, the corrosion resistance is excellent

This cross-shaped anchor for flat roofs is weighed down using concrete slabs (50 x 50 x 5cm, not included). The design is based on a high-quality stainless steel frame (150 x 150 cm) with aluminium crossbars and a central, stainless steel anchorage point for one individual (Ø 16 mm). EN 795:2012, E For flat roof pitches ≤ 5° Weighed down using 8 concrete slabs (ca. 224 kg) Weight incl. ballast: ca. 245 kg; resulting roof load approx. 108.9 kg per m² Also designed for usage as an intermediate post in a lifeline system Incl. 5 EPDM patches to protect your roof membrane

Whether this device is left standing out in the open or integrated into your roof greenery, our ABS Weight OnTop Max anchorage device for flat roof surfaces has been approved for installation without penetrating your roof surface - simply by weighting it down (50 x 50 x 5 cm, concrete slabs not included). Please observe the installation instructions provided in the "abZ" (national technical approval: Z-14.9-824) For flat roof pitches ≤ 5° Weighted down using 40 concrete slabs (ca. 1.120 kg) | resulting roof load approx. 61 kg per m² If implemented as an end or corner post in a lifeline system, a special supporting tube needs to be used

Reinforce your ABS Weight OnTop Double anchorage device with this optional supporting tube (Ø 42 mm) to withstand the increased tension exerted on the corner and end supports in a lifeline system. This device comes with an extra energy absorber. Supporting tube for Ø 16 mm posts Required for usage as a corner or end post in a lifeline system Includes an energy absorber

This anchorage device was specially-designed for flat roofs. It can be used as an anchor or system support and can be weighed down using concrete slabs (50 x 50 x 5 cm, not included) or gravel (not included). Its high-quality, stainless steel frame (150 x 150 cm) with aluminium crossbars is equipped with a central anchorage point (Ø 16 mm) - also made of stainless steel. EN 795:2012, E + CEN/TS 16415:2013 For flat roof pitches ≤ 5° Weighed down using 16 concrete slabs (ca. 448 kg) Weight incl. ballast: 483 kg | resulting roof load: approx. 214.7 kg per m² Anchorage point for 2 individuals Weighed down using gravel (ca. 450 kg) Weight incl. ballast: ca. 485 kg | resulting roof load: approx. 200 kg per m² Anchorage point for 1 individual (secures 2 individuals when used as an intermediate bracket in a lifeline system) Additional supporting tube required for usage as an end or corner post Incl. 5 EPDM patches to protect your roof membrane

This guard rail - made of aluminium and stainless steel - is kind to your roof as it is simply weighed down using special weights without penetrating your roof surface. This collective protection mechanism, which is 1100 mm high, can be used to secure a domed rooflight up to 2.5 m x 2.5 m on a flat roof with a maximum pitch of 10°. EN 13374:2013, A Penetration-free installation Designed for flat roofs with a pitch of up to 10° Suitable for domed rooflights: 2.5 m x 2.5 m Handrail height: 1100 mm Weighed down using special UV-resistant plastic weights Weights: 760 x 800 mm (2 x 25 kg) Incl. special fleece material to protect the surface

Use this guard rail system to secure the edge of your roof, a domed rooflight or other fall danger zone on a flat roof surface (pitch of up to 10°). The handrail is 1100 mm high and made of high-quality aluminium and stainless steel material. Installation is done using a set of plastic or concrete weights - without penetrating your roof surface. EN 13374:2013, A Suitable for roof pitches of up to 10° Distance between the posts: Max. 2.50 m Plastic weights 760 x 800 mm (2 x 25 kg); Weight of the system per m: 30.68 kg Concrete weights 790 x 280 mm (2 x 29 kg) Incl. special fleece material for surface protection

This temporary guard rail, which is made of high-quality aluminium, is simply flipped open and erected. On a flat roof surface (pitch of up to 10°), the posts of this guard rail system are weighed down using special weights - each weighing 25 kg. The compact design of the system when folded up makes it really easy to transport. EN 13374:2013, A Handrail height: 1100 mm Designed for temporary usage Extremely simple installation Easy to transport Can be easily adapted to fit your architecture

This brightly-coloured barrier chain (black/yellow) serves to mark the edge of a fall danger zone. The chain (8 mm) is made of weather-resistant synthetic material. The stainless steel posts are weighed down using special UV-resistant plastic weights. Stainless steel posts with specially-designed UV-resistant plastic weights Weather-resistant synthetic barrier chain Gate post equipped with a carabiner for opening and closing the system Warning plate (224 x 124 mm) Minimum distance to the edge: 2 m Posts can be placed up to 5 m apart

Operating table with hydraulic foot pump for two positionings: - High/Low, - Trendelenburg/Reverse Trendelenburg Manual servo-assisted adjustment of the back section. Model version with kidney bridge available. Mobile on four double castors with central brake activated by foot pedal. SAF mattresses preventing pressure ulcers fixed by disinfection-proof adhesive gel strips providing optimal retention and hygiene.

Component for production of composite and sandwich panels in shipbuilding and industrial construction. The rock wool panel as a base material is connected with a basalt fibre grid laminate by means of the inorganic flame retardant adhesive "LR Cerammatrix 01-50" with endothermic effect. Coatings with various surface materials, such as CPL, HPL or galvanized sheet metal are possible. A special feature of this panel is its excellent sound insulation properties. - 100% natural origin, chemically neutral — antibacterial — corrosion-resistant — thermoresistant — formstable — water repellent — vibration damping — non-combustible — no smouldering — recyclable

CBG SeaPan WP 15/G offers completely new solutions to the manufacture of cabin walls in shipbuilding. The use of lightweight composite materials makes it possible to significantly reduce the total weight of a construction with e.g. only approx. 5,25 kg/m2 for a wall panel of fire class B-15. A special feature of this panel is its excellent sound insulation. — 100% natural origin, chemically neutral — non-combustible — no smouldering — no smoke emission in case of fire — antibacterial — corrosion-resistant — pressure-resistant — vibration damping — recyclable — water repellent — good air permeability — thermoresistant