Results for
CONEC ELEKTRONISCHE BAUELEMENTE GMBH
Germany
The IP67 D-SUB SlimCon series are supplements to the IP67 D-SUB connector family. The CONEC SlimCon series has a very compact design of IP67 sealed D-SUB connectors with a one-piece zinc die-cast shell. The panel cut-out for the CONEC SlimCon series corresponds to the standard of other D-SUB connectors and thus no new cut-outs are required and refitting from standard IP20 systems to the new IP67 system of the CONEC SlimCon series is possible. The one-piece zinc die-cast shell makes the new CONEC SlimCon D-SUB connector a mechanically extremely robust interface with reliable IP67 protection – similar to the CONEC Solid Body series. However, due to its design, a reduction of the occupied space from 48% to 52 % compared to a standard IP67 protected connector can be achieved. Owing to its compact design and the one-piece zinc die-cast shell, the CONEC SlimCon series is ideal for industrial and harsh environments.
Request for a quoteDALMINEX GMBH
Germany
Position indicator for telescopic spindle extension, electric, aluminium (13 – 1390 U/Stroke)
Request for a quoteDALMINEX GMBH
Germany
Telescopic Spindle Extension T3 - waterproof. A two-piece hot-dip galvanised steel rod accord. to DIN EN 10240 (alternatively in stainless steel), coupling (bottom adapter) made of GJS400-15, galvanised accord. to DIN EN 12329, square cap (top adapter) made of GJS400-15, galvanised accord. to DIN EN 12329 and DIN 50961 (alternatively in stainless steel AISI 304). Suitable for operating key DIN 3223 C. Toolles assembly of the spindle extension with a stainless steel clip pin. Connection pins made of stainless steel 1.4301. Transport security of the rod minimum of 150 N. Self-locking in every adjustable position through a PE sealing collar on the steel tube. Torques accord. to GW336. Three-piece PE protection tube system with an additional corrugated protection tube, bonded centring cap and flange bell (F10). Completely dirt-proof and water-repellent.
Request for a quoteVKF RENZEL GMBH
Germany
This double-sided A-board is equipped with 2 waterproof poster pockets instead of the normal covers, so that your posters are optimally protected against rainwater. Furthermore, the back panels of this poster display are made of weather-resistant polystyrene. The poster stand thus defies all wind and weather. The uniform, high-quality look of the rainproof poster stand is ensured by the silver anodised click frames and the silver anodised base frames. The click frames are made of the 30 mm aluminium profile. To change the advertising media, the 4 frame profiles of the pavement stand are opened. The poster pocket is removed and the insert is replaced. After the exchange, the poster pocket is put back into the A-board and the profiles of the click frame are closed again. The poster exchange is done. Due to the use of waterproof poster pockets, the 30 mm profile creates a free space between the poster and the frame for technical production reasons.
Request for a quoteW. KÖPP GMBH & CO. KG
Germany
Cellular rubber made by KOPP is the ideal material for sealing, insulating, insulating, dampening and as rattle protection. Cellular rubber is a porous, closed-cell rubber quality that is available in various strengths and densities. It is manufactured using the so-called expansion process - based on natural and/or synthetic rubbers, such as EPDM and other synthetic elastomers. Cellular rubber is airtight and waterproof and therefore (unlike foam rubber) does not require an outer skin to be used as a seal. From our KOEPPcell® range you can get the following cellular rubber or elastomer types in our usual high quality at extremely interesting prices: • Natural rubber (NR-L, NR-S) • EPDM (EPDM-L*, EPDM-S*, EPDM- SUW*, EPDM-W*) * all also peroxidically cross-linked • Chloroprene rubber (CR-L, CR-S) • EPDM-PE blend • EPDM-CR blend (EPDM-CR-L, EPDM-CR-S ) • mixed-cell (semi-closed) EPDM (EPDM-SC) Technical properties Can withstand a wide range of requirements
Request for a quoteW. KÖPP GMBH & CO. KG
Germany
Cellular rubber made by KOPP is the ideal material for sealing, insulating, insulating, dampening and as rattle protection. Cellular rubber is a porous, closed-cell rubber quality that is available in various strengths and densities. It is manufactured using the so-called expansion process - based on natural and/or synthetic rubbers, such as EPDM and other synthetic elastomers. Cellular rubber is airtight and waterproof and therefore (unlike foam rubber) does not require an outer skin to be used as a seal. From our KOEPPcell® range you can get the following cellular rubber or elastomer types in our usual high quality at extremely interesting prices: • Natural rubber (NR-L, NR-S) • EPDM (EPDM-L*, EPDM-S*, EPDM- SUW*, EPDM-W*) * all also peroxidically cross-linked • Chloroprene rubber (CR-L, CR-S) • EPDM-PE blend • EPDM-CR blend (EPDM-CR-L, EPDM-CR-S ) • mixed-cell (semi-closed) EPDM (EPDM-SC) Technical properties Can withstand a wide range of requirements
Request for a quoteW. KÖPP GMBH & CO. KG
Germany
ellular rubber made by KOPP is the ideal material for sealing, insulating, insulating, dampening and as rattle protection. Cellular rubber is a porous, closed-cell rubber quality that is available in various strengths and densities. It is manufactured using the so-called expansion process - based on natural and/or synthetic rubbers, such as EPDM and other synthetic elastomers. Cellular rubber is airtight and waterproof and therefore (unlike foam rubber) does not require an outer skin to be used as a seal. From our KOEPPcell® range you can get the following cellular rubber or elastomer types in our usual high quality at extremely interesting prices: • Natural rubber (NR-L, NR-S) • EPDM (EPDM-L*, EPDM-S*, EPDM- SUW*, EPDM-W*) * all also peroxidically cross-linked • Chloroprene rubber (CR-L, CR-S) • EPDM-PE blend • EPDM-CR blend (EPDM-CR-L, EPDM-CR-S ) • mixed-cell (semi-closed) EPDM (EPDM-SC) Technical properties Can withstand a wide range of requirements
Request for a quoteVKF RENZEL GMBH
Germany
The uniform, high-quality appearance of this triangular stand is ensured by the silver anodised click frames and the silver anodised aluminium round tubes. The simple assembly is done by screwing the 3 click frames to the 3 stable ø 60 mm aluminium legs. In order to effectively protect the inserted posters from rainwater, a circumferential sealing rubber is mounted on the weather-resistant metal rear walls, in addition the cover foil is glued to the rear wall on a short side. The cover foils used are made of non-reflecting, UV-stabilised material to prevent the posters from fading. Furthermore, the anti-reflection coating of the films ensures that the inserts are much easier to read even in sunlight. The posters can be changed quickly by opening the click frame profiles at the front. The highlight of this display is that the complete rear wall with foil can be removed for even easier poster changing.
Request for a quoteVKF RENZEL GMBH
Germany
The pavement WindSign "QS I" was technically updated and is now available as pavement WindSign "Seal". The stronger cover foil is fixed with screws on the top profile and cannot slip down anymore. The covers can still be exchanged if necessary. Two sticky pads are implemented in the upper part of the frame. Those make sure that your posters will be held in place during installation. Of course the pads are reusable. The optimised poster stand comes in new visual appearance. All pavement signs are made with a sturdy back-wall and 2 non-glare, UV stabilised front covers. The new sealant makes the display waterproof. The base can be filled with either water or sand and is movable on 2 wheels when tilted. The strong springs allow for the highest grade of stability even in “stormy” weather conditions. Posters can be exchanged quickly by opening the aluminium click frame profiles. The header board is inserted into the upper groove of the pavement sign and fixed with screws.
Request for a quoteVKF RENZEL GMBH
Germany
The quality winner among the rainwater resistant A-bords! This rainwater-resistant pavement sign is ideal for outdoor use, for example in pedestrian zones. Through a consciously offensive orientation in these areas of application, the poster stand generates the highest possible level of attention. Thus, passers-by become potential buyers and the clientele is constantly expanding. The uniform, high-quality appearance is ensured by the silver anodised click frames and the silver anodised rack. In order to protect the inserted posters effectively against rainwater, a surrounding grooved rubber sealing is mounted on the weather-resistant metal back walls and on the covers. The anti-reflective covers are made of UV-stabilised material to prevent the posters from fading. Due to the folding technique the insert media, such as posters, can be changed easily and quickly. In order to be able to achieve an optimum clamping effect even after years, we always use springs made of spring steel.
Request for a quoteVKF RENZEL GMBH
Germany
Our WindSign "Seal" is designed for permanent outdoor use. The folding technique of the frames guarantees a quick change of the posters. A circumferential sealing rubber mounted on the rear walls prevents water from entering. The rear walls are also made of weather-resistant polystyrene. The anti-reflective covers made of UV-stabilised material prevent the posters from fading. The installation of the customer stopper is very easy. The frame is simply screwed to the plastic base and the stand is ready for use. The high stability of the Wind Sign is guaranteed by the fillable base and the special spring technology, so that the stand can also be used in stormy weather. Thanks to the wheels integrated in the base, the WindSign "Seal" can be moved easily to the desired position.
Request for a quoteVKF RENZEL GMBH
Germany
The price-performance winner among the rainwater-resistant A-stand! This rainwater resistant customer stopper is ideal for outdoor use in pedestrian zones or on the pavement. Through a deliberately offensive orientation in these areas of application, the poster outdoor stand generates the highest possible level of attention. This turns passers-by into potential buyers and the clientele is constantly expanding. The uniform, high-quality appearance is ensured by the silver anodised snap frames and the silver anodised frameworks. In order to effectively protect the inserted posters from rainwater, a rubber seal surround is mounted on the weather-resistant polystyrene back panels. The special profile technology used in this pavement sign also ensures extended protection. The anti-reflective cover sheets are made of UV-stabilised material to prevent the posters from fading. Furthermore, the anti-reflective coating of the films ensures that the inserts are much easier to read even in sunlight.
Request for a quoteDURABLE HUNKE & JOCHHEIM GMBH & CO. KG
Germany
Document pocket made of weather-resistant film with waterproof pressure closure. Fastening with enclosed self-adhesive pads. • Document pockets that are ideal for displaying information outside or in humid interior spaces such as garden centres, saunas or swimming pools where signs maybe be subjected to splashes and spray • Waterproof press stud closure for very good document protection • Attach the display pocket however you want using the four highly transparent self-adhesive pads (included), which can be removed without leaving any residue • Compliant with standard IPX5 (protection against spray from all directions) • Transparent, UV-stabilised, water-resistant, scratch-proof film with anti-glare effect • Can be used in either portrait or landscape format • Documents can be replaced quickly and easily • Holds two 160 g/qm posters (included) • A wide range of labelling style sheets is available at www.duraprint.de • Suitable for US-letter-size formats
Request for a quoteCONEC ELEKTRONISCHE BAUELEMENTE GMBH
Germany
Special applications have special requirements for connectors. For this field of application, CONEC developed water-tight D-SUB connectors with rating IP67. Owing to special sealing measures at the connector and the sealing frame, the high requirements are met. These connectors are used where dust and spray water occur and functioning of usual connectors would be negatively affected. These connectors are available as standard or high density in the usual pole number.
Request for a quoteCONEC ELEKTRONISCHE BAUELEMENTE GMBH
Germany
Connector systems able to meet special demands are needed for industrial use in harsh environments. The water resistant connector system developed by CONEC is intended for applications where dust and water are factors. Corresponding accessories, such as water resistant hoods and protective caps are available. CONEC Solid Body and CONEC SlimCon D-SUB connector series were a consequent development to establish a D-SUB connector familiy which is especially designed for application in harsh industrial environment. The one piece body - made of zinc diecast - provides outstanding mechanical robustness and protection against splash water and dust under aggressive conditions.
Request for a quoteDALMINEX GMBH
Germany
Mechanical position indicator out of plastic for telescopic spindle extensions (max. 81 U/Stroke)
Request for a quoteROLKO KOHLGRÜBER GMBH
Germany
In our textile assortment you will find, among other things, covers in various sizes for electric scooters, wheelchairs and walkers. All covers are waterproof, tear resistant and UV resistant. Our textiles are manufactured according to the latest European norms and quality standards. Do you have any questions about our products or would you like to request a quote? Just contact us. We are looking forward to your inquiry!
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
FRIWO GERÄTEBAU GMBH
Germany
•IP rating: IP67 •Output voltage tolerance: +2% / -2% •Frequency: 50 / 60 Hz •AC Input: connecting bracket 0,5...1,5 mm² •Humidity: 10%- 95% •Working temperature: -20°C - 45°C •Storage temperature : -40°C - 70°C •Standard 1: EN61347-2-13 •Standard: IEC61347-1 •MTBF: 200.000h acc. Mil217F (based on calculations at 120Vac/60Hz & 230Vac/50Hz, ambient 25°C and 100% load) (The MTBF are theoretically determined values, which does not guarantee the lifetime of the product or of the electrolytic ) h •Unit: LED •DC output: connecting bracket 0,5...1,5 mm² •Input current: 180 mA •Input tolerance: +10% / -10% •Input voltage: 220-240 V •Spec.0 cover sheet FW-Type: LT40-24/1400 WP •Protection Class: II •color: White
Request for a quoteResults for
Waterproofs - Import exportNumber of results
19 ProductsCompany type