Time it - Import export

RockNet is a real-time, low latency audio distribution network tailored to tour and installed sound applications. RockNet provides a universal solution to almost any imaginable audio distribution challenge and behaves very much like a traditional analog split system. It conveys up to 160 24 bit/48 kHz audio channels counter-rotating on a single CAT5 cable. RockNet products are designed for heavy-duty road use. Their ruggedized steel enclosures resemble the look and feel of a modular stage box. All devices feature locking IEC connectors for the redundant power supplies. All other connectors are entirely gold-plated and the circuit design is streamlined for ultra low noise and minimum distortion to meet the highest demands in audio quality. RockNet is a genuine audio network platform designed purposely for live sound applications. It is a cost-effective, integrated networking product invented, designed, and optimized for audio contribution and distribution. RockNet provides ultra...

The intuitive configuration, control, and monitoring software MediorWorks can be downloaded from any MediorNet mainframe via the Configuration Port of the Processing Card. This way you always have access to the correct software version of a specific installation. The software is a JavaTM based application, allowing any computer with a JavaTM Runtime environment such as Windows, Mac OS X or Linux to serve as the host for the application. MediorWorks auto senses the configuration and status of the system it is connected to. Five windows give easy access to any aspect of the MediorNet installation. All windows are visible at the same time. Alternatively, they can easily be accessed via one mouse click on the “Views”-window, which is floating above all other windows. The “Device Browser” shows all available nodes, the cards installed in the node and each connector of the specific media card. If a connector is selected, the “Connections”-window shows the active connections and how the...

MediorNet Compact is the cost-effective and easy-to-use entry to the Riedel MediorNet world of integrated media signal distribution and processing. It is the first fiber-based 21st-century stage box providing the flexibility of a true real-time media network including integrated signal processing at the cost of simple multiplexing point-to-point products. With a network bandwidth of 50 Gbit/s MediorNet Compact provides enough capacity for bi-directional transport of 12 HD-SDI signal, dozens of MADI streams or GBit-Ethernet signals and hundreds of audio channels or intercom ports – ideal for streamlining the infrastructure of any mobile, studio or live event application.

In enabling Riedel’s acclaimed networked approach to signal distribution and routing, the 2-RU large-scale MediorNet MetroN Core Router provides intense real-time signal-routing capacity (32x10G/32x4.25G ports) and offers non-blocking switching. MetroN provides robust video router functionality with switching delays of <40ms as well as high-speed re-routing that allows as many as 1,000 connections to be re-routed in less than a second. A single MetroN allows for building video routers with up to 192 HD-SDI and theoretically an unlimited number of outputs. Router control can be done with MediorWorks software as well as with most 3rd party control systems using the Probel or Ember+ protocol. The frame can function within a larger MediorNet installation, interfacing with other MediorNet frames via fiber. The addition of the MetroN core router increases the bandwidth available across MediorNet networks. It is the first solution of the MediorNet family, where the connection is...

Speedy Rail is the special self-supporting and self-aligning rail in extruded aluminum with a deep hard anodized surface treatment that offers exceptionally high performance and load capacity, with no maintenance and lubrication required, total reliability even in dirty environments with uniquely quiet operation. It is available with v-shaped rollers or cylindrical rollers, both covered in a plastic compound, and can be used as a linear rail or actuator. High reliability up to 80,000 Km Self-supporting for greatest design freedom Self-aligning system Uniquely quiet High technical performance High load capacity of over 3,000 Kg Optimal reliability in dirty environments Absence of lubrication Potentially infinite strokes with jointed versions Ideal for making 2 or 3-axis Cartesian systems for several applications Use as a linear guide or actuator thanks to belt or rack and pinion drives Main fields of application: Self-supporting linear rails for welding machines Self-supporting...

Removable ball pins Replaceable Customer specific dimensions and configurations can be removed and exchanged from both sides. maintenance-free Ball pins made from steel, stainless steel, plastic Easy assembly and disassembly of the ball pins by defined forces Configuration online Light weight Application areas:Automobile industry, automation, agricultural engineering, plant engineering, vehicle engineering igubal® double spherical bearing WDGM igubal® variable double spherical bearing igubal® double spherical bearing WDGM igubal® removable angle joints Easy assembly and disassembly of the ball pins by defined forces igubal® removable angle joints not removable igubal® coupling bars configurator - not removable One side removable igubal® coupling bars configurator - removable from one side Both sides removable igubal® coupling bars configurator - Removable from both sides Removable ball pins Replaceable Customer specific dimensions and configurations can be removed and exchanged from both sides. maintenance-free Ball pins made from steel, stainless steel, plastic Easy assembly and disassembly of the ball pins by defined forces Configuration online Light weight Application areas:Automobile industry, automation, agricultural engineering, plant engineering, vehicle engineering igubal® double spherical bearing WDGM igubal® variable double spherical bearing igubal® double spherical bearing WDGM igubal® removable angle joints Easy assembly and disassembly of the ball pins by defined forces igubal® removable angle joints

The grid | power V H series is particularly suitable for UPS applications with discharge times in the short-time range (1 minute to 3 hours) without falling below the permitted final discharge voltage. grid | power V H is the optimum solution for high-current applications and partial-cycle use. It is typically used in power plants and energy supply systems, UPS and switchgear. Extremely extended water refill intervals up to maintenance-free, high-energy density and long service life characterize the grid | power V H batteries. In summary, the grid | power V H can save time and resources and reduce investment costs.

We develop electrical test systems based on NI-PXI or NI-cRIO that can take on real-time capable measurement and control tasks. In addition, we can provide the FPGAs that can be used on the NI systems and the real-time operating system with software individually tailored to customer requirements.

We are experienced in test system development for leakage testing, life time testing and end-of-line test stands in the field of gas & hydrogen technology. We also have a network of suppliers and partners who provide key components for leakage measurement, piping, sealing and instrumentation. As a general contractor and integrator, Merecs Engineering can individually design, assemble and commission the test system at our customers' sites.

The µCAN.explorer is a universal monitor used to supervise data streams within a CAN network. The single messages are assigned individual names (symbols) in order to ensure a clear and simple classification The integrated data logger facilitates the data stream being acquired and saved onto the bus.Display of all received messages with indication of ID, length and data bytes Display of all received remote-frames as well as indication of their number and reception interval Storing and loading of compiled sender lists for emulating different CAN nodes Errors of the CAN bus and the controller are indicated, including error-frame-counter Supports various file formats, incl. Float according to IEEE754 and enumerations (Enums), byte order adjustable to Intel and Motorola format

The coaters series type LC were specifically developed for coating tablets. With our coater range, Loedige is one off the technological market leader. The maximised tablet bed surface in the Lödige coater and the maximum number of spray nozzles mean that extremely high liquid volumes can be applied with extremely high air supply volumes within a very short time. The newly designed, particularly low-turbulence air routing ensures a highly efficient and gentle use of dryer air. These features ensure a reliable coating process and short process times. Moreover, the low-turbulence air routing prevents contamination from the very start, thereby reducing the cleaning workload. Modern sensors permit optimisation of the spraying and drying process. Simple yet secure nozzle arm adjustment makes for easier handling.

The displacement transducers operate according to the principle of run time measurement between two points of a magnetostrictive waveguide. One point is determined by a moveable position magnet, whose distance from the null point corresponds to the section to be measured. The run time of an emitted impulse is directly proportionate to this section. Conversion to a measuring signal takes place in the downstream electronics. The waveguide is housed in a pressure-resistant stainless steel tube or extruded profile. To the rear of this is a die-cast aluminium housing containing the electronics in SMD technology. In the rod version, the position magnet is located in a ring, which is guided over the rod without contact. In the profile version, it is located either in a slider, which is linked to the moving part of the machine via a ball joint, or it moves as a liftable position magnet, without wear, over the profile.

The displacement transducers operate according to the principle of run time measurement between two points of a magnetostrictive waveguide. One point is determined by a moveable position ring, whose distance from the null point corresponds to the section to be measured. The run time of an emitted impulse is directly proportionate to this section. Conversion to a displacement signal takes place in the downstream electronics. The waveguide is housed in a pressure-resistant stainless steel tube or extruded profile. To the rear of this is a die-cast aluminium housing containing the electronics in SMD technology. In the rod version, the position magnet is located in a ring, which is guided over the rod without contact. In the profile version, it is located either in a slider, which is linked to the moving part of the machine via a ball joint, or it moves as a liftable position magnet, without wear, over the profile.

The displacement transducers operate according to the principle of run time measurement between two points of a magnetostrictive waveguide. One point is determined by a moveable position magnet, whose distance from the null point corresponds to the section to be measured. The run time of an emitted impulse is directly proportionate to this section. Conversion to a digital measuring signal takes place in the downstream electronics. The waveguide is housed in a pressure-resistant stainless steel tube or extruded profile. To the rear of this is a die-cast aluminium housing containing the electronics in SMD technology. In the rod version, the position magnet is located in a ring, which is guided over the rod without contact. In the profile version, it is located either in a slider, which is linked to the moving part of the machine via a ball joint, or it moves as a liftable position magnet, without wear, over the profile.

The displacement transducers operate according to the principle of run time measurement between two points of a magnetostrictive waveguide. One point is determined by a moveable position magnet, whose distance from the null point corresponds to the section to be measured. The run time of an emitted impulse is directly proportionate to this section. Conversion to an analogue measuring signal takes place in the downstream electronics. The waveguide is housed in an extruded aluminium profile. The electronics is housed in a die-cast aluminium sensor head. Electrical connection is implemented via a circular connector. The position magnet is located either in a slider, which is linked to the moving part of the machine via a ball joint, or it moves as a liftable position magnet, without wear, over the profile.

The displacement transducers operate according to the principle of run time measurement between two points of a magnetostrictive waveguide. One point is determined by a moveable position magnet, whose distance from the null point corresponds to the section to be measured. The run time of an emitted impulse is directly proportionate to this section. Conversion to a digital measuring signal takes place in the downstream electronics. The waveguide is housed in a pressure-resistant stainless steel tube or extruded profile. To the rear of this is a die-cast aluminium housing containing the electronics in SMD technology. In the rod version, the position magnet is located in a ring, which is guided over the rod without contact. In the profile version, it is located either in a slider, which is linked to the moving part of the machine via a ball joint, or it moves as a liftable position magnet, without wear, over the profile.

The displacement transducers operate according to the principle of run time measurement between two points of a magnetostrictive waveguide. One point is determined by a moveable position ring, whose distance from the null point corresponds to the section to be measured. The run time of an emitted impulse is directly proportionate to this section. Conversion to a displacement signal takes place in the downstream electronics. The waveguide is housed in a pressure-resistant stainless steel tube or extruded profile. To the rear of this is a die-cast aluminium housing containing the electronics in SMD technology. In the rod version, the position magnet is located in a ring, which is guided over the rod without contact. In the profile version, it is located either in a slider, which is linked to the moving part of the machine via a ball joint, or it moves as a liftable position magnet, without wear, over the profile.

The displacement transducers operate according to the principle of run time measurement between two points of a magnetostrictive waveguide. One point is determined by a moveable position magnet, whose distance from the null point corresponds to the section to be measured. The run time of an emitted impulse is directly proportionate to this section. Conversion to a measuring signal takes place in the downstream electronics. The waveguide is housed in a pressure-resistant stainless steel tube or extruded profile. To the rear of this is a die-cast aluminium housing containing the electronics in SMD technology. In the rod version, the position magnet is located in a ring, which is guided over the rod without contact. In the profile version, it is located either in a slider, which is linked to the moving part of the machine via a ball joint, or it moves as a liftable position magnet, without wear, over the profile.

The displacement transducers operate according to the principle of run time measurement between two points of a magnetostrictive waveguide. One point is determined by a moveable position magnet, whose distance from the null point corresponds to the section to be measured. The run time of an emitted impulse is directly proportionate to this section. Conversion to a digital measuring signal takes place in the downstream electronics. The waveguide is housed in a pressure-resistant stainless steel tube or extruded profile. To the rear of this is a die-cast aluminium housing containing the electronics in SMD technology. Electrical connection is implemented via a circular connector. In the rod version, the position magnet is located in a ring, which is guided over the rod without contact. In the profile version, it is located either in a slider, which is linked to the moving part of the machine via a ball joint, or it moves as a liftable position magnet, without wear, over the profile

The displacement transducers operate according to the principle of run time measurement between two points of a magnetostrictive waveguide. One point is determined by a moveable position magnet, whose distance from the null point corresponds to the section to be measured. The run time of an emitted impulse is directly proportionate to this section. Conversion to an analogue measuring signal takes place in the downstream electronics. The waveguide is housed in a pressure-resistant stainless steel tube or extruded profile. To the rear of this is a die-cast aluminium housing containing the electronics in SMD technology. Electrical connection is implemented via a circular connector. In the rod version, the position magnet is located in a ring, which is guided over the rod without contact. In the profile version, it is located either in a slider, which is linked to the moving part of the machine via a ball joint, or it moves as a liftable position magnet, without wear, over the profile.

The displacement transducers operate according to the principle of run time measurement between two points of a magnetostrictive waveguide. One point is determined by a moveable position magnet, whose distance from the null point corresponds to the section to be measured. The run time of an emitted impulse is directly proportionate to this section. Conversion to an analogue measuring signal takes place in the downstream electronics. The waveguide is housed in a pressure-resistant stainless steel tube or extruded profile. To the rear of this is a die-cast aluminium housing containing the electronics in SMD technology. Electrical connection is implemented via a circular connector. In the rod version, the position magnet is located in a ring, which is guided over the rod without contact. In the profile version, it is located either in a slider, which is linked to the moving part of the machine via a ball joint, or it moves as a liftable position magnet, without wear, over the profile.

The displacement transducers operate according to the principle of run time measurement between two points of a magnetostrictive waveguide. One point is determined by a moveable position magnet, whose distance from the null point corresponds to the section to be measured. The run time of an emitted impulse is directly proportionate to this section. Conversion to an analogue measuring signal takes place in the downstream electronics. The waveguide is housed in a pressure-resistant stainless steel tube or extruded profile. To the rear of this is a die-cast aluminium housing containing the electronics in SMD technology. Electrical connection is implemented via a circular connector. In the rod version, the position magnet is located in a ring, which is guided over the rod without contact. In the profile version, it is located either in a slider, which is linked to the moving part of the machine via a ball joint, or it moves as a liftable position magnet, without wear, over the profile.

The displacement transducers operate according to the principle of run time measurement between two points of a magnetostrictive waveguide. One point is determined by a moveable position magnet, whose distance from the null point corresponds to the section to be measured. The run time of an emitted impulse is directly proportionate to this section. Conversion to a digital measuring signal takes place in the downstream electronics. The waveguide is housed in a pressure-resistant stainless steel tube or extruded profile. To the rear of this is a die-cast aluminium housing containing the electronics in SMD technology. Electrical connection is implemented via a circular connector. In the rod version, the position magnet is located in a ring, which is guided over the rod without contact. In the profile version, it is located either in a slider, which is linked to the moving part of the machine via a ball joint, or it moves as a liftable position magnet, without wear, over the profile.

The demands on production processes often change very quickly. VEN DRY VARIO TIME makes it possible to react quickly. The batch is detected by light barriers at the infeed and the dwell time in the dryer is controlled accordingly by the state-of-the-art control system. The special handling technology with sophisticated Venjakob control system exceeds your expectations for a powerful and flexible dryer concept. Loading locations: 38 Operating width: 1,300 mm Pallet length: 5,600 mm Useful length: 5,500 mm Loading per palletmaximum: 100 kg Item heightmaximum: 60 mm

BlueInOne Ferm is an online gas analyzer for biotechnological processes. It features the parallel online estimation of CO2 and O2 combined in one compact, space saving sensor. The BlueInOne Ferm is pressure and humidity compensated and can be applied for fermenters of each size and brand. No matter if lab scale or production the BlueInOne Ferm analyzer works independent from flow, offers various mechanical connections and comprises various data output possibilities. BlueInOne Ferm is state-of-the-art. It´s PAT and QbD conform and stands for highest precision and reliability.

The analyzer for carbon dioxide and oxygen has been specially designed for monitoring cell growth processes in biotechnology. The device can be installed directly in the exhaust flow of the bioprocess and measures the concentration of CO2 and O2 there in real-time. The BlueInOne Cell automatically compensates any fluctuations of pressure and humidity in the system. The readings are therefore extremely accurate even under fluctuating measuring conditions. The BlueInOne Cell gas analyzer is fitted with an IR CO2 sensor, as well as a electrochemical oxygen sensor with galvanic cell. The O2 detector offers a measuring range of 0-100 % Vol. for oxygen, long-term stability and has a very high resolution of 50 ppm. The device can also analyze anaerobic processes with high precision.

Automatic parallel online determination of (bio)methane potential is essential to ensure the effectivity of biogas production. Yieldmaster simplifies the search for the right substrae and guarantees maximums yields for your biogas process. Using Yieldmaster minimum gas flows are not necesseray. The Yieldmaster (BCS-CH4 biogas) consists of CH4 infrared gas sensors, precision volumeters and BAcVis or BlueVis software. It can be used from small vessels (500mL) up to big lab fermenters. Data is recorded consistently. Using date from the integrated temperature measurement BacVis or BlueVis calculate the standard volume automatically. Sensors measure directly in the fermenter which means no data is lost and errors caused by gas leakage etc. are minimized. The compensating reservoir device guarantees complete measurement under all circumstances. In combination with BlueVCount (Yieldmaster 2.0) simultaneous measurement of methane and gas volumes is feasable.

Oxygen is essential for life. Measuring oxygen concentrations plays a central role in controlling biotechnological processes . No matter if fermentations, scale-up studies, bioproductions in lab or industrial scale, the BCP-O2 sensor determines the oxygen concentration in realtime (real time monitoring) in a very convenient way. By measuring the oxygen concentrations oxygen limitations can be avoided and conclusions to metabolic activity can be drawn. With the help of measuring the oxygen important process parameters as OTR oxygen transfer rate or respiratory quotient RQ can be determined. Using BCP-O2 simplifies process optimization in bioprocessing and makes it efficient and precise. In contrast to other sensors the BCP-O2 has in integrated automated temperature and pressure compensation and can be connected to each and every fermenter type. BCP-O2 doesn´t need a minimum flow rate and thus can be applied from small (lab) scale (e.g shake flask) up to the large industrial scale.

Off gas analysis in bioprocesses delivers important informatione about respiratory activity like CTR from which actions for process optimization and scale-up can be deduced from. The BCP-CO2 sensor will help you to understand and control your processes better. The CO2 analyzer BCP-CO2 services for application in fermenters and bioreactors of any scale. No matter if you are working in big stainless steel tanks, shake flasks, disposable, single-use or parallel reactorsthe BCP-CO2 is easy to install, doesn´t need much maintenance and offers an integrated, automatic pressure and temperature compensation. BCP-CO2 measures directly in the process. Additional pipes are not necessary. The extremely robust sensor has a IP65 aluminium housing and is well applicable under harsh process conditions.