Temperature sensing devices - Import export

Ex Thermostat - the Thermostat serves for limiting, monitoring or control of room temperatures, medium or surface temperatures within hazardous areas of categories 2 or 3. Type ExTR60E-50 Standard Ex Thermostat with temperature range -20 ... +50°C, adjustable with knob, current rating 16A. Type ExTR60D-50 Standard Ex Thermostat with temperature range -20 ... +50°C, adjustable with screw, current rating 16A. Type ExTR60D05/10/15 With fixed temperature 5 / 10 / 15°C - for simple control of the room temperature (e.g. frost protection) in explosion hazardous areas. Design with fix mounted 2m connection cable.

Sheathing thermocouples can be used anywhere due to their ruggedness and small design. Whether in industry, development or in the lab. The measurement point is hot junction insulated as standard to exclude any falsification of the measurement evaluation through superposition of the offsets. Sheathing thermocouples are freely flexible across their entire length. That means the thermocouple can be integrated in the installation point. The temperature to be measured can therefore be registered near the desired measuring point. A possible connection lead permits simple routing up to the measured-data acquisition. Options are available for the element diameter, element and wire length as well as the type of connection configuration (plug, socket, bare wire ends, etc.). Temperature range: -100 °C to +1.100 °C, continuous, depending on selected sheathing diameter and measuring medium or atmosphere Wire type: Silicone, Tmax: +180 °C continuous

Sheathing thermocouples can be used anywhere due to their ruggedness and small design. Whether in industry, development or in the lab. The measurement point comes insulated as standard to exclude any falsification of the measurement evaluation through superposition of the offsets. The connection lead permits simple routing up to the measured-data acquisition. Options are available for the probe diameter and wire length as well as the type of connection configuration (plug, socket, bare wire ends, etc.). Temperature range: -100 °C to +260 °C, continuous Wire type: Teflon with CU shielding, Tmax: +200 °C, continuous

Temperature range: -100 °C to +260 °C continuous Wire type: Teflon with CU shielding, Tmax: +200 °C continuous

Temperature range: -100 °C to +450 °C continuous Wire type: Fibreglass with VA braid, Tmax: +450 °C continuous

Temperature range: -100 °C to +180 °C continuous Wire type: Silicone, Tmax: +180 °C continuous

THA 200 THA 400 THA 1000 THA 1250 Compatible with any thermocouple probe type K, J or T (selection) fitted with a miniature plug. The thermocouple probe wires must be isolated from supply ground.

THK 200 THK 400 THK 1250 Compatible with any thermocouple probe type K, J, T or R/S (selection) fitted with a miniature plug. The thermocouple probe wires must be isolated from supply ground.

THN 200 THN 400 THN 1250 Compatible with any thermocouple probe type K fitted with a miniature plug. The thermocouple probe wires must be isolated from supply ground.

USB temperature converter - including free readout software - efficient and flexible measurement without additional measuring system - mobile and directly on site - for all common thermocouples.USB stick with software for direct reading and further processing on the PC Plug connection - flexibly connect the USB stick to the temperature sensor Processing of the measured values, transfer to the software Different temperature sensors and thermocouples possible Various cable types , lengths and types of connections can be selected

Format 96 x 96 mm Two/three step, continuous controller Sensor monitoring Up to 5 outputs 1 Analogue input (universal) 1 Binary input 1 Relay output (closing contact) Self-optimization (autotuning) for exact PID control Manual/automatic mode Configurable limit monitoring (alarms) Setpoint switching Level/keyboard locking RS485 interface (Modbus RTU) Ramp and timer function Firing curve for ceramic furnaces Plug-in controller module Setup interface (USB Mini-B)

Format 48 x 96 mm, portrait Two/three step, continuous controller Sensor monitoring Up to 5 outputs 1 Analogue input (universal) 1 Binary input 1 Relay output (closing contact) Self-optimization (autotuning) for exact PID control Manual/automatic mode Configurable limit monitoring (alarms) Setpoint switching Level/keyboard locking RS485 interface (Modbus RTU) Ramp and timer function Firing curve for ceramic furnaces Plug-in controller module Setup interface (USB Mini-B)

Format 48 x 48 mm Two/three step, continuous controller Sensor monitoring Up to 5 outputs 1 Analogue input (universal) 1 Binary input 1 Relay output (closing contact) Self-optimization (autotuning) for exact PID control Manual/automatic mode Configurable limit monitoring (alarms) Setpoint switching Level/keyboard locking RS485 interface (Modbus RTU) Ramp and timer function Firing curve for ceramic furnaces Plug-in controller module Setup interface (USB Mini-B)

The adhesive kapton foil as accessory to our self-adhesive thermocouples. Temperatur range: +150°C continuous, +260 °C temporary GoodUV-, aging- and solvent resistance

Helpfully for quick installation of temperature probes. These zipties are temperature resistant up to +195°C (temporary), especially to fasten our dipstick-thermocouples on a hot tub. Temperatur range: -40 °C bis +150 °C permanent, +195 °C temporary

Helpfully for quick installation of temperature probes. Our zipties are temperature resistant up to +195°C, especially to fix our dip in a hot. Temperatur range: -40 °C bis +150 °C permanent, +195 °C temporary

Helpfully for quick installation of temperature probes. These zipties are temperature resistant up to +195°C (temporary), especially to fasten our dipstick-thermocouples on a hot tub. Temperatur range: -40 °C bis +150 °C permanent, +195 °C temporary

With the sharp needle the thermocouple easily can be stickinto tubes. It allows a fast and easy measurement of the medium inside of thetube. One possible application can be the cooling water tube of an engine. The stainlesssteel plate is made to be tighten by zipties.

With the sharp needle the thermocouple easily can be stickinto tubes. It allows a fast and easy measurement of the medium inside of thetube. One possible application can be the cooling water tube of an engine. The stainlesssteel plate is made to be tighten by zipties.

With the sharp needle the thermocouple easily can be stickinto tubes. It allows a fast and easy measurement of the medium inside of thetube. One possible application can be the cooling water tube of an engine. The stainlesssteel plate is made to be tighten by zipties.

Temperature range: -100 °C to +260 °C continuous Wire type: Teflon with CU shielding, Tmax: +200 °C continuous

This surface thermocouple is made solely for screwing on. The placement of the measurement point the surface to be screwed-on guarantees optimum temperature detection. We kept the most common thread sizes in mind for fastening. Temperature range: -100 °C to +550 °C continuous Wire type: Fibreglass with VA braid, Tmax: +450 °C continuous

This surface thermocouple is made solely for screwing on. The placement of the measurement point the surface to be screwed-on guarantees optimum temperature detection. We kept the most common thread sizes in mind for fastening. Temperature range: -100 °C to +350 °C continuous Wire type: Teflon with CU shielding, Tmax: +200 °C continuous

This self-adhesive thermocouple is ideal for surface temperature measurements. For both curved and flat objects. The extremely thin wire, not even 1 mm in diameter, facilitates highly flexible installation. The thin probe tip guarantees very rapid response. Temperature range: -100 °C to +150 °C continuous, +260 °C short-duration Adhesive foil: Fibreglass, approx. 19 x 25 mm

This self-adhesive thermocouple is ideal for surface temperature measurements. For both curved and flat objects. The extremely thin wire, not even 1 mm in diameter, facilitates highly flexible installation. The thin probe tip guarantees very rapid response. Temperature range: -100 °C to +150 °C continuous, +260 °C short-duration Adhesive foil: Kapton, approx. 9 x 20 mm

Sheathing thermocouples can be used anywhere due to their ruggedness and small design. Whether in industry, development or in the lab. The measurement point comes insulated as standard to exclude any falsification of the measurement evaluation through superposition of the offsets. The connection lead permits simple routing up to the measured-data acquisition. Options are available for the probe diameter and wire length as well as the type of connection configuration (plug, socket, bare wire ends, etc.). Temperature range: -100 °C to +800 °C, continuous, depending on selected sheathing diameter and measuring medium or atmosphere Wire type: Teflon with CU shielding, Tmax: +200 °C, continuous

Sheathing thermocouples can be used anywhere due to their ruggedness and small design. Whether in industry, development or in the lab. The measurement point comes insulated as standard to exclude any falsification of the measurement evaluation through superposition of the offsets. The connection lead permits simple routing up to the measured-data acquisition. Options are available for the probe diameter and wire length as well as the type of connection configuration (plug, socket, bare wire ends, etc.). Temperature range: -100 °C to +1.100 °C, continuous, depending on selected sheathing diameter and measuring medium or atmosphere Wire type: Silicone, Tmax: +180 °C, continuous

Sheathing thermocouples can be used anywhere due to their ruggedness and small design. Whether in industry, development or in the lab. The measurement point comes insulated as standard to exclude any falsification of the measurement evaluation through superposition of the offsets. The connection lead permits simple routing up to the measured-data acquisition. Options are available for the probe diameter and wire length as well as the type of connection configuration (plug, socket, bare wire ends, etc.). Temperature range: -100 °C to +1.100 °C, continuous, depending on selected sheathing diameter and measuring medium or atmosphere Wire type: Fibreglass with VA braid, Tmax: +450 °C, continuous

Sheathing thermocouples can be used anywhere due to their ruggedness and small design. Whether in industry, development or in the lab. The measurement point comes insulated as standard to exclude any falsification of the measurement evaluation through superposition of the offsets. The connection lead permits simple routing up to the measured-data acquisition. Options are available for the probe diameter and wire length as well as the type of connection configuration (plug, socket, bare wire ends, etc.). Temperature range: -100 °C to +1.100 °C, continuous, depending on selected sheathing diameter and measuring medium or atmosphere Wire type: Teflon with CU shielding, Tmax: +200 °C, continuous