System cables - Import export

PMA cable protection systems are used wherever the mechanical protection of electrical lines and cables is needed. Highly flexible cable protection tubes are specifically suited for the additional protection of cable guides in e-chain® systems. Due to the combination of technical knowhow and the strictest international safety guidelines, PMA fulfils the worldwide requirements of industrial markets in application areas like mechanical engineering, automotive construction, fiber optics, solar systems as well as applications in the robot sector with high speeds and millions of alternate bending cycles.

The chainflex® bus cables are available for all well-known industrial bus systems such as Profibus, Interbus, Profinet, Ethernet, CAN-Bus, DeviceNet, ASi or CC link. Depending on the cable family, they can be used for torsion, for severe climatic conditions, for narrow radii, or particularly long travel distances, at high speeds and accelerations. Tested in the igus® laboratory with millions of cycles in e-chains®, they provide guaranteed safety against failure. -Bending radii up to 7,5xd -Jacket materials: PVC, iguPUR, PUR or TPE -For flexing applications -For medium duty applications -For extremely heavy duty applications -For twistable use -For heaviest duty applications in rail vehicles -For increased tensile load -Overall shield Flame retardant

- Requirements: For extremely heavy duty applications - Outer jacket: TPE - Hydrolysis and microbe-resistant - Silicone-free - UV-resistant - Oil resistance: Oil-resistant according to DIN EN 60811-404, resistant to organic oils according to VDMA 24568 with Plantocut 8 S-MB by DEA

Safe energy and data transmission The igus® Chainflex® cable range offers a choice of over 850 different cables, available from stock. A main focus of the range are the data and bus cables. Solutions based on copper, glass or plastic fiber optic cables are provided for almost all bus systems in industrial use. We continue to provide you with all supply cables for your drive systems such as motor cables with and without brake/tacho cables and the matching feed cables. Ready assembled with plugs and sockets on request. Cost-reducing assembly The use of pre-assembled E-ChainSystems® enables expensive assembly hours at the place of installation to be considerably reduced. Functionally tested systems guarantee that plant components are soon put into operation. Assembly service We would be pleased to send you an offer for complete solutions, including all assembly services. You do not tie up your own resources and you have a trouble-free energy supply system for the future at a fixed price. LBT FLIZZ® - High speeds and accelerations Travel distances up to 120m, travel speed up to 8 m/s Suitable for moving or stationary controls, ideal for all bus systems When light weight is required When quiet, maintenance-free operation is required When rust-proof property is required At -10°C to +60°C constant temperature At accelerations over 10 m/s² Energy supply system for all media, not only electrical Also suitable for outdoor use (with reduced load data) Your benefit from LBT FLIZZ® Guaranteed service life Cost-effective compared with conventional energy supply systems Cable protected against dirt, rain, sun, ice, snow and leaves Insensitive to wind and motion Good resistance to chemicals, solvents, etc. Use of special cables possible, e.g. servo drive cables, fiber optic cables, bus systems etc. almost maintenance free Quick and easy installation due to delivery as a ready-assembled system Easy integration with existing plants Cable length 50% of the travel distance No central cable junction No effort required to maintain carriages Sewage treatment plant Longitudinal scrapers Sand traps Rain water overflow reservoir Galvanizing equipment Cranes Plant construction Space-saving and compact energy supply with LBT FLIZZ® - low maintenance system, delivered pre-fitted with ready-assembled igus® E-Chain Energy supply system protected from wind and weathering. The used materials are weather-resistant, as well as resistant against most chemicals, oils, fats, coolants and solvents Solid plastic with powder-coated support tubes Modular assembly: the system can be enclosed with intermediate panels! Can be delivered pre-fitted Variable fields, which are simply screwed on top of each other Glide rail integrated in the profile

The cable channels feature a cover that can either be removed by lifting it upwards or pivoted open by up to 90° along the length of the channel. Order made easy. In addition to the pivoting cover, installers also value the optional plastic separating strips, which ensure that the individual hoses, signal lines and power cables in the cable channel can be easily separated and well structured. The separating strips also facilitate overhead assembly. When inserted in the cable channel, they prevent the installed cables and channels from falling out. The separating strips can be opened at any time to allow the installation of further cables. They are also available with mounting holes, which is a new feature for aluminium cable channels. These can be very quickly attached to a BLOCAN profile slot by means of a pivoting mounting clip. Here too, the RK Rose+Krieger product philosophy takes hold – connection without drilling! Simply cut the aluminium profiles to length and assemble them.

Fast assembly and perfect organisation Modern machines contain countless power, data and control cables, along with pneumatic hoses. In large systems, the total length of these can quickly add up to several thousand metres. Cable channels make it easier to organise and assemble these cables. The BLOCAN® cable channel system made from anodised aluminium impresses not only with its attractive design, but also through a multitude of well thought out details, which offer the customer considerable added value and greatly facilitate their work. The cable channels in sizes 40, 40x20, 40x80, 80x40 and 80x80 can be supplied as 6 metre bars or cut to length. They are also available with mounting holes, which is a new feature for aluminium cable channels. These can be very quickly attached to a BLOCAN® profile slot by means of a pivoting mounting clip.

The PFLITSCH CABseal is used to feed pre-assembled and non-assembled cables, as well as pneumatic and hydraulic lines, simply and reliably into control cabinets, primarily, but also into enclosures and machines. To this end, their sizes and dimensions of the frames are compatible with the common standard cut-outs and hole patterns in control cabinets so that just a single CABseal frame is required per cut-out. The CABseal cable entry system consists of four different sized frames and a number of cable grommets that can be equipped in various constellations. The grommets are slotted at the sides to make it easier to insert cables. While the frame is made of hard and robust polyamide, we use a flexible elastomer for the cable grommets and their special sealing lips. To ensure the cables are properly sealed, the grommets are positioned in the frame and compressed when the upper part of the frame is screwed down.

For preassembled cables and simple maintenance PFLITSCH brought the first completely splittable plastic single cable gland to the market in the form of the UNI Split Gland. This product allows preassembled cable to be fed through a hole or the replacement of old or defective cable glands, without having to interfere with the existing cable installation or switch off the affected machine. Your advantages: Split cable gland body, pressure screw and counter nut in size M20, M25 and M32 for over 100 different sealing inserts For cable cross sections of 2.0 mm to 20.5 mm Ingress protection rating IP 67 Superior strain relief values to EN 62444 class A Ambient temperatures of -20 °C to +80 °C

Splittable plastic and metal versions seal preassembled cables The splittable flange variants UNI Flange in plastic and UNI Flange HD (Heavy Duty) in metal have been well-designed by PFLITSCH as product solutions for use in harsh industrial environments to provide reliable cable entries for preassembled cables. A two-part frame manufactured from high-quality grey or black PA plastic or die-cast zinc can be inserted into standard 112 mm x 36 mm sheet metal cut-outs for 24-pin rectangular heavy-duty plug-in connectors and provides the cable entries with a reliable seal. Your advantages: Three integrated cable glands for over 100 different sealing inserts Cable cross sections from 2.0 mm to 20.5 mm Ingress protection rating IP 66 Superior strain relief values to EN 62444 class A Ambient temperatures of -20 °C to + 80 °C

Safely carries single cables Where single cables are to be routed in a group and supported firmly without the use of trunking, the Single Wire System SWS from PFLITSCH offers a better alternative to cable ties, clamps, hoses or hook and eye fastener tape. Your advantages: Bendable VA stainless steel rod for robust, flexible cable routing support Corrosion-resistant system Easy to clean, open cable routing Easy installation with VA stainless steel or plastic mounts SWS consists of bendable and yet robust 5 mm support rods with open routeing rings into which the cable is simply laid. Lines and hoses up to 16 mm can be safely accommodated – on straight sections or around corners. The support rods are attached with bolted-on plastic mounting plates or VA stainless steel mounts welded on to the machine body for example.

Variable cable routeing with superior strength and durability Open, robust wire-tray trunking systems offers excellent cable routeing solutions in challenging industries such as telecommunications and IT, the food industry and chemical industry as well as machinery and equipment. The system is approved in accordance with UL and DNV for offshore use. Your advantages: Open, easy to manage cable layouts Safe, very strong and corrosion-resistant construction Easy assembly and installation with two tools and two types of connectors Easy to clean, good ventilation Wire-tray Trunking is available in various cross sections from 53 mm x 46 mm to 620 mm x 110 mm and in heights of 60 mm and 100 mm, as mini-trunking from 40 mm x 20 mm in U-, C- and G-formats and as flat trays.

Junction systems are used anywhere sensor and actor signals need to be extended quickly and easly for connection to their superordinate control systems. Individual signals are either connected directly to the superordinate system via a homerun cable or via a connection interface. Optional LED displays for signal and power reduce the effort required to track down errors.

Junction systems are used anywhere sensor and actor signals need to be extended quickly and easly for connection to their superordinate control systems. Individual signals are either connected directly to the superordinate system via a homerun cable or via a connection interface. Optional LED displays for signal and power reduce the effort required to track down errors.

Junction systems are used anywhere sensor and actor signals need to be extended quickly and easly for connection to their superordinate control systems. Individual signals are either connected directly to the superordinate system via a homerun cable or via a connection interface. Optional LED displays for signal and power reduce the effort required to track down errors.

Junction systems are used anywhere sensor and actor signals need to be extended quickly and easly for connection to their superordinate control systems. Individual signals are either connected directly to the superordinate system via a homerun cable or via a connection interface. Optional LED displays for signal and power reduce the effort required to track down errors.

Custom-designed clamping systems for pipes, tubes, hoses, cables and other components according to customer`s specifications or based on STAUFF developments, made of Polypropylene, Polyamide and other thermoplastics. Accessories such as weld plates, cover plates, bolts as well as rubber inserts are available on request.

Use this fall protection roller glider in lifeline systems and in temporary kernmantle cable lifeline solutions. Designed for kernmantle cables up to Ø 14 mm Suitable for use in a lifeline system (Ø 8 mm or Ø 6 mm) Detachable glider

Use one of these mobile kernmantle cable systems to temporarily install a horizontal lifeline system on a pitched or flat roof. This lanyard is equipped with freely-moving carabiner hooks and is available in 3 lengths: 15 m (1 hook), 23 m (2 hooks) and 30 m (3 hooks). EN 795:2012 & CEN/TS 16415:2017 EN 353-2:2002 & EN 358:2000 Sharp edge-tested kernmantle cable (Ø 12 mm) acc. RFU CNB/P/11.075 Incl. energy absorber and adjustable rope shortener Secures up to 4 individuals Incl. spliced carabiner hooks which move freely along the cable (15 m = 1 hook, 23 m = 2 hooks, 30 m = 3 hooks)

Very robust constructions to protect supply lines - Cable bridge - Hose and cable bridge - Rubber ramp system - Protection mat for events - Ramp system - End piece without adapter - End piece with adapter - Angle 45º with adapter

TKD | 05 Servo-drives, measurement & system cables Flexible & high flexible Servo-drives, measurement & system cables for fixed istallation, flexible use and for use in drag chains & robotic applications. - Cables for servo-drives 0,6/1kV - Measurement & System cables (feedback, encoder, resolver, speedo sensor, signal) - for DriveCliq applicationss - for harsh operating conditions - 3D - suitable in case of torsional stress Excerpt of versions: > shielded, unshielded > UV-resistant, Oil-resistant > UL/CSA recognized > fixed installation, limited flexible, flexible & high flexible > compatible systems for example: B&R, Baumüller, Berger Lahr, Control Techniques, ELAU, Fagor, FANUC, Heidenhain, Jetter, Lenze, LTi DRiVES, NUM, Omron, Rexroth, SEW, Siemens, Sick, Stöber, a.o. Excerpt of products: KAWEFLEX® Servo - KAWEFLEX® 5... Series - KAWEFLEX® Allround - KAWEFLEX® KINEMATICS 3D

TKD | 02 Electronic (LF), telecommunication & intrinsically safe systems cables Electronic cables, versatile for low-frequency data transmission systems in electronics and electrical engineering. Telephone cables for indoor and outdoor use in communications technology as well as for fire alarm systems. - PVC- & Halogen-free electronic cables - Electronic & control cables for intrinsically safe circuits - Approved electronic & data cables - Low-capacity data cables - Hook up & installation cables - Halogen-free installation cables - Instrumentation cables - Telecommunication cables Excerpt of versions: > double shielded, shielded, unshielded > stranded in layers, pairs, triples, quads > UV-resistant, Oil-resistant > UL/CSA recognized Excerpt of products: ELITRONIC® - PAARTRONIC® (PVC & FRNC) - DATATRONIC®-CY (UL/CSA) - DATEX-CY - DATEX-PIMF-CY - INDUCOM® RE-2X(St)Yv-fl - INDUCOM® RE-2X(St)Yv-fl PIMF