Support - Import export

Crane Plates with carry Loop All dimensions possible.

The parts used in building,Stainless steel makes the building stronger.

These are the parts made by aluminum,after machining then doing anodized Golden.

Aluminum support processing.

This parts is made by aluminum, after 3-4 axis machining, then, going golden anodize,it is used in the external support of the machine.

Speedy Rail is the special self-supporting and self-aligning rail in extruded aluminum with a deep hard anodized surface treatment that offers exceptionally high performance and load capacity, with no maintenance and lubrication required, total reliability even in dirty environments with uniquely quiet operation. It is available with v-shaped rollers or cylindrical rollers, both covered in a plastic compound, and can be used as a linear rail or actuator. High reliability up to 80,000 Km Self-supporting for greatest design freedom Self-aligning system Uniquely quiet High technical performance High load capacity of over 3,000 Kg Optimal reliability in dirty environments Absence of lubrication Potentially infinite strokes with jointed versions Ideal for making 2 or 3-axis Cartesian systems for several applications Use as a linear guide or actuator thanks to belt or rack and pinion drives Main fields of application: Self-supporting linear rails for welding machines Self-supporting...

DryLin® R shafts and supported shafts - Technical data DryLin® R - AWMP Precision aluminum shaft, mm DryLin® R - AWMP DryLin® R - AWMU Supported aluminum shaft, mm DryLin® R - AWMU DryLin® R - SWM/EWM An steel or stainless steel precision shaft, mm DryLin® R - SWM/EWM DryLin® R - SWUM/EWUM Supported steel shaft orstainless steel shaft, mm DryLin® R - SWUM/EWUM DryLin® R - SWUMN/EWUMN Low supported steel shaft orstainless steel shaft, mm DryLin® R - SWUMN/EWUMN DryLin® R - EWUM Partially supported stainless steel shaft, mm DryLin® R - EWUM-Ø DryLin® R - CWM Carbon-fiber shaft, mm DryLin® R - CWM DryLin® R - AWMP Precision aluminum shaft, mm DryLin® R - AWMP DryLin® R - AWMU Supported aluminum shaft, mm DryLin® R - AWMU DryLin® R - SWM/EWM An steel or stainless steel precision shaft, mm DryLin® R - SWM/EWM DryLin® R - SWUM/EWUM Supported steel shaft orstainless steel shaft, mm DryLin® R - SWUM/EWUM DryLin® R - SWUMN/EWUMN Low supported steel shaft orstainless steel shaft, mm DryLin® R - SWUMN/EWUMN DryLin® R - EWUM Partially supported stainless steel shaft, mm DryLin® R - EWUM-Ø DryLin® R - CWM Carbon-fiber shaft, mm DryLin® R - CWM Aluminum Low weight Lower wear of the plain bearing Corrosion resistant Ideal in combination with liners made of iglidur® J/J 200 Delivered off the shelf Steel Low-priced standard High load capacity Application in dry area Hard chrome-plated also available Lower coefficient of friction against plastic bearing Stainless steel High corrosion-resistance High resistance to chemicals Ideal solution for the wet area V4A for extreme chemical intensive applications Female thread, axial male thread Pins Groove cut-in Spanner flat Female thread, radial Special machining All shafts can be individually machined. Please send us your drawing. We'll submit an offer to you in a short time. Shaft request

Cost effective slab support with dimpled base for an ideal drainage of surface water. More than 60 versions available for different joint sizes and bond types. Choose VOLFI Basic Supports made from rubber-coated high performance elastomer for additional benefits.

The MBS hydraulic cylinders of the MZR-1002 series are direct support cylinders for vehicle construction. A robust cylinder connection is made possible by welding blocks. The support plates are ± 15 ° swivel. The cylinder connections have threaded holes for pipe connections according to BSPP ISO 1179-2. Hub and piston rod overhang are variably selectable. Control of the cylinders is possible on both sides via integrated hydraulically operated check valves in plate construction. With the exception of the piston rod, all surfaces are protected against corrosion with a black primer. On request alternative surface treatments are possible. The surface of the piston rod is hard chromed, ground and polished. The cylinders are suitable for hydraulic fluids of types H, HL and HLP according to DIN 51524/51525. If you have questions about areas of application or other options, we are happy to answer them. Download the data sheet for detailed information:

With our velcro supporters FAPI-M14, FAPI-TRIM, FAPI-150 and FAPI-250 you can mount all kinds of velcro-backed grinding discs easily. Due to the different mountings and diameter they are usable for many purposes. On handmachines as well as on stationary grinding and deburring machines. Dimensions Diameter: 115 mm / 150 mm / 250 mm Mountings: M14 thread (115 mm) Quick-release system/TRIM (115 mm) Quick-release system/FIT (150 mm) 25 mm hole (150 mm) 30 mm hole (250 mm) We would be pleased to advise you on which velcro supporter can be used in your processing, in order to achieve top process results.

Market leader with OEM quality In principle, metals can be melted on numerous occasions and reworked. This is, therefore, conventional recycling, , as a new product with similar properties and of identical quality comes from a starter material. In addition to hammer axes, the scrap shearing knives used in this industry are in our product range. Since the beginning of scrap recycling, our clients have relied on our highly accurate and extremely robust shearing knives and, even today, we are, with our 100 years of experience, a market leader in this sector. You find our Webshop https//shop.buchholzgruppe.eu/shop We also supply you the necessary machine parts (knife seat and knife holder) for the overhaul of your shear.

Universal Adapter between VOLFI Stackable Support or Twist Pedestal and VOLFI Basic Support. Can be used in all VOLFI systems to achieve varying joint widths.

For patio projects with only few installation-height differences fixed-height supports get used often for clever sparing as an alternative to more complex adjustable pedestals. The components can be combined with each other to flexibly create raised-floors from 10 to above 250mm height. For universal use as high-quality stackable supports or also for elevations of various VOLFI System components.

shelf support type 2 Ø5 x 16mm long "Duplo"

This watch holder "Linum" is made from clear acrylic and is available in both ladies' and men's watches. Select the watch stand with an adjustable height or in a rigid version

Vibration dampers of the series GAB are especially used to stabilize your pipe system. You can use these elements to absorb thermal expansion of the pipes, too. These elements are often used in the field of plant engineering. Depending on the chosen series you are able to couple your system with this elements by a welding profile or a fork head. RG+ offers these suspensions in the following designs: GAB-( )-2 with one fork head on each site GAB-( )-5 with one fork head on one site and a welding profile on the other

Depending on type, multi-directional dampers can be loaded in every axis. In our standard vibration dampers of the GDZ series two all-metal cushions are installed. Depending on the assembly, these cushions are load with pressure or tension. Vibration dampers of the series 7 have another cushion obstructed which allows them to absorb load in horizontal direction additionally. Because of this, GDZ dampers are perfectly suitable for applications in the fields of plant engineering and rail vehicle construction. Our product range includes three different types of these multi-directional dampers: GDZ series 1 for a fixation with bolts for pressure and tension load GDZ series 5 for a welding fixation for pressure and tension load GDZ series 7 for a fixation with bolts for pressure, tension and horizontal load

shelf support type 8 with one peg Ø5mm

shelf support type 7 with 2 pegs Ø6mm and Ø8mm

shelf support type 6 with 1 peg Ø5mm

shelf support type 5 with 2 pegs Ø5mm

shelf support type 3 with one peg Ø5mm, 22mm long

shelf support type 1 with one peg Ø6mm, 20mm long

shelf support type 4 with 2 pegs Ø6mm and Ø8mm

Connecting tubes which have been cut to size can be connected to one another using ITAS tube connectors made of cast aluminium via a simple plug-in principle. No further mechanical processing is necessary, which reduces assembly costs to a minimum. An internal clamping mechanism and the tightening of the special clamping screws guarantee a positive connection with smooth transitions, which are pleasant to the touch and also ensure enhanced safety – injuries due to getting caught up are an impossibility. The result is a simple and stable system which fulfils all safety guidelines.

Vibration damper of the series GMF are especially designed for machine tools. The elements GMF-( )-4 are made to mount small presses or cutters. Depending on the size of the elements they have a load range between 250 and 10.000 kg. Vibration damper of the series GST have an own levelling integrated, so they can compensate small unevenness on the floor. Our product range includes three different types of machine feet: GMF-( ) as a vibration damper especially for machine tools GMF-( )-4 as a vibration damper especially for small presses GST-( ) as a vibration damper with integrated levelling

Damping cushions made of stainless steel are knitted and pressed in a special process. Depending on size, density and design it can be loaded in a range between 5 and 20.000 kg. It can be pressed in cylindrical or rectangular shape. Versions with bunches and steps are available. Standard materials are 1.4301 and 1.4404. Additional materials and special designs are on demand. RG+ offers the following damping cushions as standard elements: GKK as a vibration damper in cylindrical form GKR as a vibration damper in rectangular form GKB as a vibration damper with a bunch

Monitor swivel arms for ergonomic workstation design The monitor mountings from RK Rose+Krieger allow for an optimal view of the monitor or a control panel. The range of action can be increased even further by using a swivel arm. This may be useful for carrying out set-up work on machinery for example, or if the monitor is having a disruptive impact on the working environment. There is also the option of expanding the support arm with two support tubes (twin version) to include a sturdy keyboard tray. The modular design of the RK swivel arm/support arm system allows for varied combination options and helps to adapt workstations to the most ergonomic arrangement.

Monitor swivel arms for ergonomic workstation design The monitor mountings from RK Rose+Krieger allow for an optimal view of the monitor or a control panel. The range of action can be increased even further by using a swivel arm. This may be useful for carrying out set-up work on machinery for example, or if the monitor is having a disruptive impact on the working environment. There is also the option of expanding the support arm with two support tubes (twin version) to include a sturdy keyboard tray. The modular design of the RK swivel arm/support arm system allows for varied combination options and helps to adapt workstations to the most ergonomic arrangement. Different support arms, swivel arms and telescopic support arms are available, based on the load to be supported (monitor weight, torque support). The basic version has one support tube for loads of up to 10 kg , and the twin version has two support tubes for loads of up to 25 kg.