Straps - Import export

Item No.: 685226 Strap Specification Elastic cord Braided elastic cord ring, rape yellow Model type: S (Standard) Dimension: approx. 60.0 mm wide Material: Polyester Colour: black Property: elastic Elastic Material: Natural rubber Packaging: 50m, rolled, with core

Item No.: 685632 Strap Specification Strap Webbing set Model type: C (Customised) Dimensions: approx. 31.5 mm wide Material: Polyester Colour: ceramique Property: non-elastic Packaging: in cardboard box Note Features: Multiple holes, stitchable plastic

Item No.: 685631 Strap Specification Strap Webbing cuts Model type: C (Customised) Dimension: approx. 50.0 mm wide Material: Polyester Colour: black Property: non-elastic Packaging: loose in cardboard box Note Features: Cut and holed by ultrasonic cutter (multiple holes)

Item No.: 685226 Strap Specification Strap Strap threaded into injection-moulded fasteners, ends with multilayer stitching Model type: C (Customised) Dimension: approx. 60.0 mm wide Material: Polyester Colour: black Property: elastic Elastic Material: Natural rubber Packaging: packed in cardboard box

Item No.: 685204 Strap Specification Strap Woven elastic with stitched straps, wire hook and injection-moulded fastening set Model type: C (Customised) Dimension: approx. 40.0 mm wide Material: Polyester Colour: black Property: elastic Elastic Material: Natural rubber Packaging: loose in cardboard box

We recommend against turning stacked coils upright on the stack. The first choice for the raising of packages delivered in a horizontal position with split straps is therefore always a coil turning seat. However, there is not always a fixed installation for raising narrow coils. The secutex splitband turning strap has two different attachment ends. One end loop of the secutex lifting strap is flat, and can be easily threaded through the gap between the split bands. The flat end loop can then be easily hooked into the forged Cshackle. The protective sleeve is positioned against the “sharp edges“ of the coil. During lifting, the strap moves freely through the protective sleeve while the latter remains motionless against the load. There is no movement, and therefore no wearing against the “sharp edges“. The solution An end loop of secutex lifting slings for slit strips is flat and can easily be pushed into the gap between the slit strips.

The Powerflex protective sleeve helps to effectively increase the friction values of smooth surfaces or to protect the lifting strap against rough surfaces. The particularlyrobust Powerflex penetrates deep into the fibres and also protects the protective sleeve against the penetration of fluids or dirt particles.

This very compact thin layer surrounds the lifting strap either on a single side or completely. It is extremely wearresistant and ideal for very rough surfaces. The Powerflex coating provides additional protection to the textile against dirt and the penetration of foreign particles.

Item No.: 985603 Safety strap as release strap Specification Safety strap PP webbing, flame-retardant, length: approx. 260 mm +/– 5 mm Model type: C (Customised) Dimensions: approx. 25.0 mm wide Material: Polypropylene Colour: red Property: non-elastic Packaging: rolled Note Features: Holed and slotted by laser

Item No.: 985603 Pull strap as release strap Specification Pull strap Webbing, cut to length, with imitation leather handle, stitched into strap Model type: C (Customised) Dimensions: approx. 25.0 mm wide Material: Polypropylene/imitation leather Colour: red/black Property: non-elastic Packaging: loose in cardboard box

Item No.: D43190040 Shoulder strap Specification Shoulder strap, flame-retardant finish Model type: C (Customised) Dimensions: approx. 38–40 mm wide Material: Polyester/Polyamide Colour: black Property: elastic Elastic Material: Natural rubber Packaging: rolled, with core Note Features: Flame-retardant finish

Item No.: 685616 Pull strap Specification Pull strap Webbing, stitched into strap Model type: S (Standard) Dimensions: approx. 20.0 mm wide Material: Polyester Colour: Veneto beige Property: non-elastic Packaging: loose in cardboard box

Item No.: 985601 Seat release strap Specification Seat release strap Combination of webbing and braided elastic with elongation limiter, with holes, stitched Model type: C (Customised) Dimension: approx. 20.0 mm wide Material: Polypropylene Colour: black Property: elastic/non-elastic Elastic Material: Natural rubber Packaging: loose in cardboard box

Item No.: 685086 Mobile phone strap Specification Mobile phone strap Woven elastic set, flame-retardant finish, length: 148 mm +/– mm Model type: C (Customised) Dimension: approx. 60 x 148 mm Material: Polyester Colour: black/grey Property: elastic Elastic Material: Natural rubber Packaging: loose in cardboard box Note Features: With stitched-on label with stitched border

Item No.: 585630 Tubular strap Specification Tubular strap Woven tubular strap set with plastic slides Model type: C (Customised) Dimension: approx. 40.0 mm wide Material: Polypropylene Colour: black Property: non-elastic Elastic Material: Polyamide Packaging: loose in cardboard box

Item No.: 985774 Seat lifting strap Specification Seat lifting strap Webbing, looped, crimped with two eyes Model type: S (Standard) Dimensions: approx. 20.0 mm wide Material: Polypropylene Colour: black Property: non-elastic Packaging: loose in cardboard box

Item No.: 685795 Release strap Specification Release strap Webbing, with narrow-wide transition, stitched into strap Model type: C (Customised) Dimensions: approx. 20.0 mm wide Material: Polyester Colour: black Property: non-elastic Packaging: loose in cardboard box Note Features: With narrow-wide transition

Economical and durable A perfect combination Excellent handling, as the loops of the wear strap are extremely flat and can be easily inserted under the load. The rigid wear strap can be easily pushed even through narrow gaps. Improved efficiency, as the crane does not have to be lowered as far. Experience has shown, lifting processes have been significantly improved. Extra light, as the textile material of the sling offers a clear weight advantage over steel cables or chains. Economical, as only the lowcost wear strap has to be replaced! Durable, as the loop of the wear strap is coated and is therefore protected against wear.

The form and surface of the edge have a significant effect on the durability of the lifting accessory. Very rough surfaces, such as tsleeve of precast concrete products, can quickly damage the lifting strap or cable. If nothing moves, there can be no wear. The cutresistant secutex protective sleeve sits firmly against the edge and the textile lifting strap runs reliably through the protective sleeve.

In addition to loads with rightangled edges, there are also transportable goods with different geometry. These include loads with projecting spines and with sharp or jagged external contours such as gearwheels, turbine blades, etc. These edges are not addressable using normal approaches. The secuwave protective sleeve was developed for components with extremely critical edges. secuwave increases the deflection radius. The „sharp edge“ has no contact with the protective sleeve and thus cannot cut it.

If the edge radius is smaller than the thickness of the lifting strap, the edge is considered „sharp“. Lateral motion or pressure alone may be enough to cut through the textile fibres of the lifting strap. The 56 mm secutex coating sits between the load and the textile load lifting accessory. The edge radius is increased by this layer. The edge is no longer sharp against the lifting strap and lift forces are directed away from the edge.

The protection against „sharp edges“ Alongside other factors such as temperature, chemical environment and mechanical loads, the „sharp edge“ remains one of the main causes of damage to the lifting accessory itself and frequent cause of accidents. Most damage on sharp or rough edges is the result of load movement perpendicular to the load lifting accessory. If the edge is „sharp“ it can, in a worstcase scenario, cut through the lifting accessory. If the load moves laterally, a cutting movement takes place at the edge. Much like the blade of a knife, the edge can cut through the fibres of the textile lifting accessory. For loads with a „sharp edge“ or with a rough surface, a protective sleeve or fixed coating is recommended to protect the textile lifting strap.

For particularly heavy loads, normal secutex protective sleeves can only be used for larger edge radii because the heavyload round slings under load are up to 80 mm thick. According to the technical definition, this creates a “sharp edge“. Both the loadbearing round slings as well as the protective sleeve will be destroyed by the forces which occur here. The secuwave edge protector increases the load’s edge radius. The wave profile helps the edge protector adapt to the load. The castin perforated plate then permanently keeps the shape. The additional secutex protective sleeve reliably prevents the edge protector from moving through the heavyload round sling. Possible applications bridge elements, machinery, gear segments etc.

If the load has sharp edges or has a rough outer surface, a suitable abrasion or edge protector must be used. secutex edgeprotectors are easy and versatile to use. The extremely robust secutex edgeprotectors protect the load and the lashing belts. They increase the radius of the edge and prevent “sharp edges”. The corner edgeprotector SWH for lashing belts considerably increases the radius on the corners. It is particularly robust and durable thanks to the perforatedplate reinforcement. An optional magnetic version can be easily attached to the magnetic load.

By means of a hinge, the edge protector SKB can be optimally suited to fit any load geometry. It can be optionally equipped with magnets to better retain its position on the magnetic load. The edge protector can be quickly secured to the edge of the lashing belt by means of mounting slits. The lashing belt slides through the secutex clip which remains on the lashing belt despite collisions. Optionally available Magnets for easy fixation of the magnetic load

Even when securing the load, the lashing material must be protected against the „sharp edge“. Highvalue loads may not be damaged by lashing chains or ropes. The SKBE secutex simple edge protector has a low deadweight and is easy to handle thanks to the flexible textile reinforcement. It is simply pushed onto the lashing material via the fulllength opening on the reverse side and is thereby impossible to lose. Important note the secutex simple edge protector SKBE is not suitable for prolonged use.

Even when securing the load, the wire cable must be protected from the “sharp edge“. Highvalue loads may not be damaged by wire cables. The secutex simple edgeprotector SKDE is easily pushed over the backside of the mounting slit and over the wire cable. It is affixed and can no longer be detached. The edgeprotector is simple and versatile. The corner protector has a low deadweight and is quick and easy to handle thanks to the flexible textile reinforcement.

When lifting machinery components, there are always edges and surfaces which are insufficiently protected by regular edgeprotectors and protective sleeves. Textile load lifting accessories cannot always be used, as the cables or chains being used press against the load with extreme pressure. Damage to the often expensive and highlymachined components is often unavoidable and the edges must be reworked at great cost. The secuPad is DIN A4 size and can easily be placed at critical locations by hand. It consists of multiple textile layers joined together on every side. It adapts flexibly even to difficult contours. The surface is coated in Powerflex and protected against abrasion and the penetration of shavings and lubricants.

This protective sleeve is particularly robust and has two contact sides in this version for work on both sides. Both contact sides are coated with secutex. They are extremely resistant and minimize the buildup of wrinkles in the textile. Use of the protective sleeve is no longer necessary.