Results for
CARL FRIEDRICH USBECK KG
Germany
zinc diecasting*for rods up to 16 mm Ø*nickel plated brass screws*location hole 10 mm Ø
Request for a quoteSPANSET SECUTEX GMBH
Germany
This protective sleeve sits firmly on the lifting strap and therefore stays in its position when the lifting strap is in contact with the load. The contact side is coated with secutex which is extremely tearresistant and reduces the formation of creases in the textile strap. The reverse side is coated with Powerflex and protected against abrasion and penetrating dirt. The very flat form and resistance to bending in a longitudinal direction make it simple to insert the SFXequipped strap into small gaps. The firm grip prevents unintentional slipping.
Request for a quoteSPANSET SECUTEX GMBH
Germany
The Clipon sleeve easyClip [ESC] can be quickly mounted thanks to mounting slots on the backside. On a case to case basis, it is preferably used in places where round slings or protective sleeves are required. Important The clipon sleeve easyClip [ESC] offers simple handling and quick setup times. The secutex protective layer can be placed softly and flexibly on the load, increasing the radius on critical edges. Leverage force can be extensively distributed and the load remains undamaged.
Request for a quoteSHENZHEN PROMOSTAR HARDWARE CO.,LTD
Germany
Mechanical parts.
Request for a quoteNOVELIS DEUTSCHLAND GMBH OHLER® - FLEXROHRE
Germany
Heat protection sleeves and mats extend our expertise in protective aluminum flexible tubing to other shapes and uses. Layers of aluminum foil are combined with fiberglass for products that can withstand temperatures up to 750°C.
Request for a quoteJÄGER & FRESE GMBH
Germany
mushroom head sleeve nut with hex socket
Request for a quoteJÄGER & FRESE GMBH
Germany
flat head sleeve nut with hex socket
Request for a quoteJUMBO-TEXTIL GMBH & CO. KG
Germany
Item No.: 685633 Protective sleeve Specification Protective sleeve Webbing set, stitched Model type: C (Customised) Dimensions: approx. 50 x 45 mm Material: Polyester Colour: black Property: non-elastic Packaging: loose in cardboard box Note Features: Laser-cut contoured cutting
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Bentley-Harris® Textalu 1202 is an insulative fiberglass sleeving with a heavy aluminum coating designed to protect components in high temperature areas. It provides superior insulation to components that must maintain stable temperatures to assure performance efficiency. Textalu 1202 is used on wire harnesses, sensor control wiring and cable assemblies in close proximity to engines and exhaust systems. Due to its elastic structure, Textalu 1202 conforms well to the variable profiles of the components it protects. Its braided construction allows good flexibility in temperatures as low as -50°C. The infra-red emissivity rating of Textalu 1202 heavy aluminum coating, combined with its fiberglass braid, ensures temperature stability inside the Textalu sleeving despite frequent external temperature fluctuations due to radiant heat.
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
TEXTALU® E is a thin wall glass fibre braid made of glass fibres with heat-reflecting aluminium coating. Its reflecting surface guarantees that the protective sleeve made of this high-performance material maintains a nearly constant interior temperature even under strongly fluctuating ambient temperatures. This non-ductile braid sleeve is ideal for protecting lines, cables and cable sets against radiation heat.
Request for a quoteSPANSET SECUTEX GMBH
Germany
The secutex chain sleeve protects the chain (sandblasting) and the slinger. The protective hose is not well suited for the intensive use and transport of sharpedged parts due to the high surface pressure and the lack of reinforcement. Please note The chain hoses are designed for chains of quality class 8 that conform to standards.
Request for a quoteSPANSET SECUTEX GMBH
Germany
When lifting machinery components, there are always edges and surfaces which are insufficiently protected by regular edgeprotectors and protective sleeves. Textile load lifting accessories cannot always be used, as the cables or chains being used press against the load with extreme pressure. Damage to the often expensive and highlymachined components is often unavoidable and the edges must be reworked at great cost. The secuPad is DIN A4 size and can easily be placed at critical locations by hand. It consists of multiple textile layers joined together on every side. It adapts flexibly even to difficult contours. The surface is coated in Powerflex and protected against abrasion and the penetration of shavings and lubricants.
Request for a quoteSPANSET SECUTEX GMBH
Germany
While the stiffness of regular protective sleeves often makes lifting easier, it can be rather uncomfortable when handling smallersized loads. Small gaps and limited contact areas make handling the stiff protective sleeve more difficult in this situation. The secutex “veloxClip“ is made with a slit along the reverse side. This makes it very flexible in the bending direction. In the longitudinal direction, on the other hand, the protective sleeve keeps its valued properties and remains stiff. This makes it a very simpletouse alternative when lifting loads with more limited contact areas. It is easy to insert through lower gaps and adapts flexibly to loads during lifting.
Request for a quoteSPANSET SECUTEX GMBH
Germany
The secutex clip [SC] can be quickly mounted thanks to mounting slots on the backside. On a case to case basis, it is preferably used in places where round slings or protective sleeves are required. Important The clip [SC] offers simple handling and quick setup times. The secutex protective layer can be placed softly and flexibly on the load, increasing the radius on critical edges. Leverage force can be extensively distributed and the load remains undamaged.
Request for a quoteSPANSET SECUTEX GMBH
Germany
The Powerflex protective sleeve helps to effectively increase the friction values of smooth surfaces or to protect the lifting strap against rough surfaces. The particularlyrobust Powerflex penetrates deep into the fibres and also protects the protective sleeve against the penetration of fluids or dirt particles.
Request for a quoteFRIEDR. FREEK GMBH
Germany
Characteristics of our HotMicroCoils with reflection tube are easy mounting and variable heat distribution. Because of its direct touch and toleranced fit, the sleeve coil heater allows a very good heat transmission to the nozzle. In all our HotMicroCoil heaters with reflection sleeve the assembly of a thermocouple is possible and recommended for bigger diameters and power.
Request for a quoteSPANSET SECUTEX GMBH
Germany
This protective sleeve is particularly robust and has two contact sides in this version for work on both sides. Both contact sides are coated with secutex. They are extremely resistant and minimize the buildup of wrinkles in the textile. Use of the protective sleeve is no longer necessary.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
JÄGER & FRESE GMBH
Germany
sleeve nut made of stainless steel M8 x 20mm head Ø20mm with hex socket SW5
Request for a quoteJÄGER & FRESE GMBH
Germany
sleeve nuts made of stainless steel M6x9, M6x12, M6x15 and M6x18 head Ø15mm with hex socket SW5
Request for a quoteJÄGER & FRESE GMBH
Germany
slotted mushroom head sleeve nut
Request for a quoteSPANSET SECUTEX GMBH
Germany
secutex protective sleeves are vital when turning over coils. The lifting strap is attached to a crane hook and attached to the load with the secutex protective sleeve. During lifting, the strap moves freely through the protective sleeve while the latter remains motionless against the load. This means that turning the load 90° is possible without any problem whatsoever. If the load is paced to the other side according to the same principle, it can be also be turned by 180°. The lifting strap can slide through the protective sleeve during the turning process. The protective sleeve and load, however, remain in constant contact. Our tips for safe turning – The lifting strap is exactly at „12 o‘clock“ over the centre of the coil. – Only individual, unpackaged and cleanlywrapped coils may be turned. – A nonslip surface, such as the secutex turning mat (cf.p. 102] must be used. – The coil must be prevented from rolling in or sliding perpendicularly to the lifting strap.
Request for a quoteSPANSET SECUTEX GMBH
Germany
secutex protection also for wire ropes secutex protective sleeves in combination with Spanset lifting slings are always the best choice for lifting machinery elements and other loads. Because of the design, the lifting slings are wide, the load is distributed over a relatively large area. But sometimes secutex protective sleeves are also required for wire ropes. The wire ropes have an almost round diameter, the surface area to the load is rather small and the stress per area is high. In general, the use of wire rope sleeves can only be recommended for the lifting of large, round loads, i.e. without sharp or angular edges. There are slotted and also unslotted secutex wire rope protective sleeves available for one or two strands. The slotted variants can easily be assembled afterwards, the closed types, on the other hand, have to be installed during the manufacture of the wire ropes. Please note that the wire ropes often have a larger diameter than the nominal size
Request for a quoteSPANSET SECUTEX GMBH
Germany
The secutex protective sleeve is optimally coordinated from a technical standpoint for the spanset lashing belt programme or the spanset round slings. The contact side is coated with secutex. It is extremely resistant and minimizes the buildup of wrinkles in the textile. The secutex protective sleeve with singlesided coating can be easily pushed over lifting equipment and protects against damage caused by “sharp edges” and the rough edges of the lifting equipment and the load at the same time.
Request for a quoteFRIEDR. FREEK GMBH
Germany
The Freek heat transfer nozzle heating system especially addresses manufacturers and users who operated their hotrunner nozzles with cast-in heaters in the past and would like to stick to their engineering know-how without paying the high price of this former heater design. The standard material of our Freek heat transfer nozzle heater alternative is brass, with or without coating, preferably with a slit. The slit allows the assembly of an external bendable thermocouple and facilitates the disassembly, e.g. in case of a revision and can be coiled over. This is not possible at competitor's nozzle heater solutions. Freek's tight coiling at the heater's ends provides a maximum possible power concentration (patented).
Request for a quoteDURABLE HUNKE & JOCHHEIM GMBH & CO. KG
Germany
Document sleeve with permanent adhesive strips for labelling items such as plastic containers. • Document sleeve in A4 format with two permanent adhesive strips on the back • Use on plastic containers, wood and cardboard boxes • Blue rear foil and transparent front foil made of heavy-duty polypropylene • Suitable for scanners and indelible • Inserts can be exchanged quickly • Internal dimensions: A4 portrait / 210 x 297 mm (W x H) • Suitable printable insert labels: Article number 485602
Request for a quoteDURABLE HUNKE & JOCHHEIM GMBH & CO. KG
Germany
Document sleeve with permanent adhesive strips for labelling items such as plastic containers. • Document sleeve in A6 landscape format with two permanent adhesive strips on the back • Use on plastic containers, wood and cardboard boxes • Blue rear foil and transparent front foil made of heavy-duty polypropylene • Suitable for scanners and indelible • Inserts can be exchanged quickly • Internal dimensions: A6 landscape / 148 x 105 mm (W x H) • Suitable printable insert labels: Article number 485102
Request for a quoteDURABLE HUNKE & JOCHHEIM GMBH & CO. KG
Germany
Document sleeve with a magnetic strip on the back for use on metal surfaces. • Document sleeve in A6 landscape format with two magnetic strips on the back • Perfect for use on metallic surfaces, such as warehouse shelves, racking and metal containers • Coloured rear foil and transparent front foil made of heavy-duty polypropylene • Suitable for scanners and indelible • Inserts can be exchanged quickly • Internal dimensions: A6 landscape / 148 x 105 mm (W x H) • Suitable printable insert labels: Article number 485102
Request for a quoteDURABLE HUNKE & JOCHHEIM GMBH & CO. KG
Germany
Extra strong, magnetic document sleeve for metal surfaces. With protective flap to prevent documents from getting dusty or damp. • Magnetic document sleeve with strong adhesive force through two heat-sealed neodymium strong magnets • Use on metallic surfaces, such as meshed containers, pipes and moveable transport containers • Coloured rear foil and transparent front foil made of heavy-duty polypropylene • Protective flap protects inserts against dust and moisture • Suitable for scanners and indelible • Inserts can be exchanged quickly • Internal dimensions: A5 landscape / 210 x 148 mm (W x H) • Suitable printable insert labels: Article number 485502
Request for a quoteDURABLE HUNKE & JOCHHEIM GMBH & CO. KG
Germany
Document sleeve with a magnetic strip on the back for use on metal surfaces. • Document sleeve in A5 landscape format with two magnetic strips on the back • Perfect for use on metallic surfaces, such as warehouse shelves, racking and metal containers • Coloured rear foil and transparent front foil made of heavy-duty polypropylene • Suitable for scanners and indelible • Inserts can be exchanged quickly • Internal dimensions: A5 landscape / 210 x 148 mm (W x H) • Suitable printable insert labels: Article number 485502
Request for a quoteResults for
Sleeving - Import exportNumber of results
68 ProductsCompany type
Category