Sealants - Import export

Anti-corrosion flexible one-sided self-adhesive butyl sealing strip, made of highly elastic, synthetic rubber (butyl) of soft rubber-like texture. It adheres reliably without heating. The butyl sealing strip is driven apart by the contact pressure, but due to its elasticity and plastic properties it penetrates into the smallest joints and unevenness and thus provides an optimum sealing. It can be drawn out to wafer-thin films by hand. Even high contact pressure level is not able to destroy the film. Non-ageing, UV-resistant, watertight, non-shrink, tight towards water vapour, seawater resistant. A sealant between metal, wood, plastics, organic glass and silicate glass with and among each other. It seals rivet and screw joints, flanged and folded connections. Sealing between metals prevents galvanic /electrolytical corrosion. Does not corrode Plexiglas, metal, wood, oil- and synthetic resin paints and does not contain any corroding ingredients.

fako® Sealing putty 3765, made of butylrubber, has been developed as a supplement to the fako® Sealing strip 3714, for most sealing purposes where absolute resistance to ageing is required and for which an intermediate layer of 0.8 mm to 1 mm has to be used. In combination with the Sealing strip 3714 most desired thickness’s can be obtained for seals. The putty does not become hard but remains plastic and elastic. To fulfil its requirements the putty has not only to be elastic but also plastic so that, when pressed, it will penetrate into any gaps and remain, thus forming a complete seal. Technically this is only possible through a combination of two basic materials with the same chemical composition but with different molecular weights. With two components the above requirement is met for both sufficient penetration depth and stability of the kit at the same time. By simple filling with a putty knife, you can obtain a min. thickness of approx. 0.2 to 0.3 mm. Priming is not required.

AUTOSOL® CERAMIC SERIES - POLYMER PROTECTION SEALANT The hydrophobic booster for surfaces sealed with AUTOSOL® CS - Ceramic Coating. Even more protection, even more colour depth, even smoother. Use as a topcoat after the ceramic coating has cured or as a care product in between. Also suitable for non-pre-sealed surfaces.

These particularly long sealant collars were specially designed for sealing up anchorage points on a bitumen roof surface. They are 300 mm long and available in two models: For anchors with or without an additional supporting tube (Ø 16 oder Ø 42 mm). The discs are 420 mm in diameter. The collars have also been marked with a series of practical notches which make it easier to shorten them. Sanded or slated - for bitumen roof surfaces Suitable for Ø 16 and 42 mm supports Extra-long: 300 mm Notches cut into the surface every 20 mm allow the tube to be shortened in a straight line Incl. shrink tubing Disc diameter: Ø 420 mm

Use one of these collars to seal up an anchorage point with or without an additional supporting tube (Ø 16 und Ø 42 mm). This sealant collar is available in two finishes for use on a bitumen roof surface: Sanded or slated. The disc is 420 mm in diameter. We supply this collar with matching shrink tubing. Seal for bitumen roof surfaces Sanded or slated For Ø 16 mm and Ø 42 mm rods Shrink tubing included Disc diameter Ø 42 cm

This extra-long collar can be used to seal up an anchorage point on a synthetic roof surface. The collar is 300 mm long and available in two models - for anchors with or without an additional supporting tube (Ø 16 oder Ø 42 mm). The disc is 420 mm in diameter. Practical notches make light work of shortening it. Suitable for PVC, PP and PE roof surfaces Suitable for Ø 16 and 42 mm supports Extra-long: 300 mm Notches cut into the surface every 20 mm allow the tube to be shortened in a straight line Incl. shrink tubing Disc diameter: Ø 22 cm

Use one of these sealant collars to seal up an anchorage point installed on a PVC, PP or PE roof surface. This seal solution is suitable for Ø 16 and 42 mm posts. The disc is 220 mm in diameter. Shrink tubing is included in the package. Suitable for PVC, PP and PE roof surfaces Specially designed for Ø 16 mm and Ø 42 mm posts Shrink tubing included Disc diameter Ø 22 cm

This sealant collar was designed for anchorage points with a diameter of 16 or 42 mm and is cold-bonded onto the subsurface. Special notches allow it to be flexibly shorted. The disc of the collar is 420 mm in diameter. A tube clamp is included in the package. Specially designed for cold-bonding, e.g. on corrugated roofs Not suitable for EPDM sheeting Designed for Ø 16 mm and Ø 42 mm rods Tube clamp included Disc diameter Ø 42 cm