Results for
CBG COMPOSITES GMBH
Germany
Anti-corrosion flexible one-sided self-adhesive butyl sealing strip, made of highly elastic, synthetic rubber (butyl) of soft rubber-like texture. It adheres reliably without heating. The butyl sealing strip is driven apart by the contact pressure, but due to its elasticity and plastic properties it penetrates into the smallest joints and unevenness and thus provides an optimum sealing. It can be drawn out to wafer-thin films by hand. Even high contact pressure level is not able to destroy the film. Non-ageing, UV-resistant, watertight, non-shrink, tight towards water vapour, seawater resistant. A sealant between metal, wood, plastics, organic glass and silicate glass with and among each other. It seals rivet and screw joints, flanged and folded connections. Sealing between metals prevents galvanic /electrolytical corrosion. Does not corrode Plexiglas, metal, wood, oil- and synthetic resin paints and does not contain any corroding ingredients.
Request for a quoteCBG COMPOSITES GMBH
Germany
fako® Sealing putty 3765, made of butylrubber, has been developed as a supplement to the fako® Sealing strip 3714, for most sealing purposes where absolute resistance to ageing is required and for which an intermediate layer of 0.8 mm to 1 mm has to be used. In combination with the Sealing strip 3714 most desired thickness’s can be obtained for seals. The putty does not become hard but remains plastic and elastic. To fulfil its requirements the putty has not only to be elastic but also plastic so that, when pressed, it will penetrate into any gaps and remain, thus forming a complete seal. Technically this is only possible through a combination of two basic materials with the same chemical composition but with different molecular weights. With two components the above requirement is met for both sufficient penetration depth and stability of the kit at the same time. By simple filling with a putty knife, you can obtain a min. thickness of approx. 0.2 to 0.3 mm. Priming is not required.
Request for a quoteABS SAFETY GMBH
Germany
These particularly long sealant collars were specially designed for sealing up anchorage points on a bitumen roof surface. They are 300 mm long and available in two models: For anchors with or without an additional supporting tube (Ø 16 oder Ø 42 mm). The discs are 420 mm in diameter. The collars have also been marked with a series of practical notches which make it easier to shorten them. Sanded or slated - for bitumen roof surfaces Suitable for Ø 16 and 42 mm supports Extra-long: 300 mm Notches cut into the surface every 20 mm allow the tube to be shortened in a straight line Incl. shrink tubing Disc diameter: Ø 420 mm
Request for a quoteABS SAFETY GMBH
Germany
Use one of these collars to seal up an anchorage point with or without an additional supporting tube (Ø 16 und Ø 42 mm). This sealant collar is available in two finishes for use on a bitumen roof surface: Sanded or slated. The disc is 420 mm in diameter. We supply this collar with matching shrink tubing. Seal for bitumen roof surfaces Sanded or slated For Ø 16 mm and Ø 42 mm rods Shrink tubing included Disc diameter Ø 42 cm
Request for a quoteABS SAFETY GMBH
Germany
This extra-long collar can be used to seal up an anchorage point on a synthetic roof surface. The collar is 300 mm long and available in two models - for anchors with or without an additional supporting tube (Ø 16 oder Ø 42 mm). The disc is 420 mm in diameter. Practical notches make light work of shortening it. Suitable for PVC, PP and PE roof surfaces Suitable for Ø 16 and 42 mm supports Extra-long: 300 mm Notches cut into the surface every 20 mm allow the tube to be shortened in a straight line Incl. shrink tubing Disc diameter: Ø 22 cm
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
ABS SAFETY GMBH
Germany
This sealant collar was designed for anchorage points with a diameter of 16 or 42 mm and is cold-bonded onto the subsurface. Special notches allow it to be flexibly shorted. The disc of the collar is 420 mm in diameter. A tube clamp is included in the package. Specially designed for cold-bonding, e.g. on corrugated roofs Not suitable for EPDM sheeting Designed for Ø 16 mm and Ø 42 mm rods Tube clamp included Disc diameter Ø 42 cm
Request for a quoteABS SAFETY GMBH
Germany
This shrink tubing is specially designed for anchorage points (Ø 16 mm) and supports that have been reinforced using a supporting tube (Ø 42 mm). It is available in 3 different lengths (300, 600 and 1200 mm) and can be individually shortened. When you heat the tubing up using a hot air gun it shrinks to fit snugly around your sealant collar and anchor. Extension for ABS LockSeal sealant collars Designed for Ø 16 mm posts Available in 3 different lengths: 300, 600 and 1200 mm Simply shorten the tubing to the required length
Request for a quoteResults for
Sealant - Import exportNumber of results
8 ProductsCompany type
Category