Screen - Import export

This stable partition offers flexibility and protection with the aim of screening standing persons and workstations from each other. The interplay of silver anodised aluminium uprights and transparent acrylic panel offers a simple exterior. At the same time, the panel can provide a high-quality barrier between your customers, patients, employees and areas. The crystal-clear acrylic panel ensures that daylight is retained in the room. It is attached to the standpipe with 3 sign grippers each. The silver anodized standpipe "Como" is held by silver powder-coated steel base plates. Such a partition wall is a practical article to provide protection at short notice and depending on the situation. By using the partition wall, the persons present can be separated not only physically. They can also be protected from each other. The wall is a separation and hygiene protection at the same time. In order to react to new situations, it can be quickly repositioned and still provide a firm stand.

Set up the aluminium partition wall including the partially printed banner at the desired location with a few easy-to-move steps. The partition consists of an aluminium frame, which is fixed on two stable angle feet. The room divider is delivered to you with a crystal clear banner made of PVC, which can be partially printed with an individual motif. Through the flat piping sewn all around the banner, the foil is inserted into the profile of the aluminium frame and stretched at the same time. The partition wall is ideal for implementing distance rules and separating areas from each other. At the same time, the partial transparency allows a view of the room. This is particularly advantageous where visual contact between staff and visitors is important.

In those areas where employees meet each other or where sales staff and customers are standing together, special hygiene regulations must be observed in the current situation. The "Construct" partition wall is ideal for protecting employees and customers. The silver anodised aluminium square tube provides the basis for setting up the plastic panel. It is crystal clear and, with a size of 1000 mm width and 800 mm height, offers exactly the right hygiene protection for separating the breathing areas of at least one person standing. For transport, the partition wall can be divided in height. The spitting protection wall has a total height of 2000 mm and offers optimal application possibilities, for example at cash registers or service counters. Adjoining workplaces can thus be easily separated from each other, while room brightness and atmosphere are only slightly affected. Documents or goods can be pushed through under the separating pane.

General Features Poster Series LED Signage that delivers truly captivating content in any indoor environment. Advanced High Brightness Black technology, Advanced High Refresh Rate, Fast installation of panel to Light Frame, Just Signal person to install/uninstall, savin labor cost Die-Casting Magnesim frame design. All Front Services Light Weight Faster Cooling Advenced and safety Lock Nova Star Controller indoor Space Black ​​ Mechanical / assembly features: ​ No noise, lower power consumption, good heat dissipation. Hot swapping of the back panel to replace PSU & electronics Fly bar for both hanging and ground stacking Corner protection for safe transport in case ​ Components/Electronic features: ​ Premium components​ Black mask for superior contrast and rentability Standart - Pro 16 Bit / Plus 18 bit+ greyscale (4x high than market average) Rotation function enabled IP powerCon in/out IP dataCon in/out CE, EMC, LVD approved

Type: R 60-100 Manufacturer: Nivoba Description: screens

These precision and small parts are used in printer accessories.

Precision and complex machining.mask the hole and thread and then procedure in anodize.

The extremely space-saving design of our screen changer allows a lot of creative freedom, both with new machines and in the case of retrofitting, since the structure of the extruder platform only needs to be adjusted a little. The screen changer is installed instead of a connection piece and can be equipped with a hydraulic or electric drive. The simplest way, however, is to use a cordless screwdriver, which makes changing bits a quick and easy endeavor. Screen changers are available for all common throughputs.

At our Innovation Lab, we develop entirely new processes when the desired results cannot be achieved with standard solutions. Our customers can practically watch over our shoulder and participate in the process to the extent they choose. The results are then put to the test in the adjacent Technical Centre. Sometimes this opens up whole new business areas for our customers. Getting more than they bargained for – that’s one more thing our customers appreciate.

Discover the TURBOTRAN 6.1, the fully automatic heat transfer machine for textile printing with up to 600 pcs./hour. ✔ Efficiency and speed: The machine does it all, from transfer placement to pressing, peeling and giving out the finished textile ✔ Reliable support: Dedicated service team by phone, email or on-site. ✔ Features: Automatic start, a panic button, membrane platens, laser guides, and more This fully automatic heat transfer carousel is the most modern heat press in the market. With 1 operator you can decorate up to 600 t-shirts per hour. Even the application of several transfers at once is possible. The easy to change platens come in any size you need. The TURBOTRAN can be used to apply any kind of transfer but works best with hot peel DTF or screen-printed ones. An outfeed conveyor belt allows an easy integration into your process. Speed up your textile printing business for work wear, sportswear, t-shirts, hoodies, bags and more.

Electric double heat press for textile transfers. ✔ Double platen ✔ Even temperature and pressure ✔ Opens and closes automatically ✔ Up to 40x50cm base plate ✔ No compressor ✔ Laser guides This fully electric double heat press is designed for medium size productions without compressed air. Due to its electric closing mechanism, it is easy to operate without exhausting your arm. And while one side is pressing, you have time to prepare the other for the next cycle. Furthermore, a small gap underneath the base plate allows you to thread the t-shirt onto the platen. Using a small display, you can adjust temperature and dwell time to your likings. In automatic mode, the machine will automatically close and open the press as well as move it from one platen to the other based on set timings. With a range of different base platens, this press can be used for t-shirts, hoodies, bags, sleeves, legs, bags, neck tags and a lot more.

Great TPU powder for heat transfer printing. ✔ High elasticity ✔ Safe to wash at 40°C ✔ Soft feel ✔ Great price ✔ Different particle sizes available ✔ Low activation temperature ✔ Cotton, Polyester and more Our hot melt powders are tailored for heat transfer printing. With a range of different particles sizes, we have the right powder for light fabrics like t-shirts as well as for heavy materials like sports bags. With great adhesion to many materials including cotton, polyester, blends, nylon and more, you won't need to switch powders in-between. Furthermore, these hot-melt powders can be used at 110°C, which makes that a great choice for heat sensitive materials including polyester. Just sprinkle the powder in the still wet ink of your DTF (Direct to Film) or screen-printed transfer. Compatible to most available inks in the market!

Heat transfer films for easy to peel heat transfers. ✔ High ink uptake ✔ Nice, matt finish ✔ Soft feel ✔ Great price ✔ Anti-static ✔ Thermally stabilized ✔ Hot or cold peel! Our instant-peel film for DTF (Direct to Film) printing is your best bet for a safe and easy process. It comes with many layers of coating which guarantee a great ink uptake and an easy release. Furthermore, the transfer film leaves you to choose in-between a quick hot peel straight after pressing or to peel it cold. The anti-static feature of this film makes sure that no hot-melt powder particle sticks to the unprinted area, giving you a clean transfer result. Additionally, the film is matt on both sides so that the print won't stick to the film once rolled up and to make sure, that it can be processed perfectly in your DTF printer and transfer press.

Discover the DIGITRAN FlexLine DTF600x3, a 3-head Direct-to-Film (DTF) printer for textile transfer production. ✔ Efficiency and speed: Fast, hassle-free startup with factory-tested machines and optional installation service. ✔ Reliable support: Dedicated service team by phone, email or on-site. ✔ Complete solution: One-stop shop - ink, adhesive, films, parts, etc. ✔ Spot Colors: Red, Green, Blue, Orange ✔ Fluorescent Colors: Red, Green, Yellow, Orange Equipped with 3 EPSON i3200-A1 print heads, it prints in CMYK, white and spot or fluorescent "neon" colors. On a print width of 600mm you can either increase the gamut size by adding spot color or create unique designs with neon color. Automatic cleaning cycles and ink recirculation ensure long print head life. Print high quality transfers for t-shirts, hoodies, bags and more and benefit from us as your one-stop-shop partner for equipment, consumables, and spare parts.

Heat transfer films for easy to peel heat transfers. ✔ Easy peel ✔ High-gloss finish ✔ Great price ✔ Thermally stabilized ✔ Hot or cold peel! Our release film SHIELD SR is created to be used with toner based printing technologies. The 23um thick PET film is coated with our unique SHIELD SR release coating, which add gloss and protection to your prints. Furthermore, the transfer film leaves you to choose in-between a quick hot peel straight after application or to peel it with a delay. The SR version is designed as an all-rounder, combining good resistance against cremes, water and mechanical damage. The standard core size is a 6'' core with a film length of 3000m per roll. Custom rolls can be made.

At cash points, receptions, kiosks, snack bars, and for talking with customers in the services field – this hygiene screen can be assembled in a flash and, thanks to the service hatch, is really versatile. Designed for: Bar counters (standing) Tables (seated) Ceiling mounted

Strong, water-based adhesive disperion for heat transfers. ✔ For many materials ✔ Different application temperature ✔ Low Viscosity ✔ Great price ✔ Clear coating Our water-based adhesive dispersions are made for heat transfer printing. With different base materials from PU to acrylics, we can create the right adhesive for your applications. Our main products are the MT-I adhesive, which adheres to many materials at temperatures from 50 - 100°C with great hot tack. The second is PPT-I, which adheres to untreated polypropylene at low temperatures. The main use if in combination with toner-based prints, but they can be used with other prints as well. Once we know the application, we can help you find the right adhesive for it!

Strong, water-based adhesive disperion for heat transfers. ✔ Flexible film ✔ Hydrophobic ✔ Low Viscosity ✔ Great price ✔ Clear coating ✔ Application temp.: 80 - 100°C ✔ All-purpose adhesie Our V-6 hot melt dispersions is tailored for heat transfer printing. With a medium activation temperatur it can be used also on lots of different materials. The adhesive forms very flexible film that make it a good partner to be used on flexible materials. It can be used well with toner-based prints. The formulations creates good adhesion on many materials, which makes it an all-rounder. It shows good overall resistance without any mayor strength or weakness. Furthermore, the particles in this dispersion are fine dispersed and result in even and repeatable results.

Strong, water-based adhesive disperion for heat transfers. ✔ Flexible film ✔ Hydrophobic ✔ Low Viscosity ✔ Great price ✔ Clear coating ✔ Application temp.: 50 - 80°C ✔ For untreated PP (polypropylene) plastics and PET Our PPT-I hot melt dispersions is tailored for heat transfer printing. The formulation is tailored for untreated PP plastics. It also provides a low activation temperatur and a good hot-tack. Due to this it is easy to achieve great bonds on this difficult material, even at higher speeds. It can be used well with toner-based prints. This adhesive is great for heat transfer printing onto cosmetic packaging as well as promotional and industrial products made of PP. It shows good resistance against water, alcohols and cremes. Furthermore, the particles in this dispersion are fine dispersed and result in even and repeatable results.

Strong, water-based adhesive disperion for heat transfers. ✔ Flexible film ✔ Hydrophobic ✔ Low Viscosity ✔ Great price ✔ Clear coating ✔ Strong hot-tack ✔ Application temp.: 50 - 100°C ✔ For ABS, SAN, PET and more Our MT-I hot melt dispersions is tailored for heat transfer printing. With a wide activation temperatur range it can be used also on materials like PET. Futhermore, the formulation creates and adhesive film which has a high hot tack. Due to this it is easier to achieve great bonds and to print at higher speeds. It shows good adhesion on many materials, which makes it a great adhesive to skip cleaning the coating equipment. It can be used well with toner-based prints. This adhesive is great for heat transfer printing onto cosmetic packaging as well as promotional like pens. It shows good resistance against water. Furthermore, the particles in this dispersion are fine dispersed and result in even and repeatable results.

Strong, water-based adhesive disperion for heat transfers. ✔ Very hard once dried ✔ Hydrophobic ✔ Low Viscosity ✔ Great price ✔ Clear coating ✔ Application temp.: 80 - 110°C ✔ For glas, ceramics, ABS, ... Our GK-I hot melt dispersions is tailored for heat transfer printing. With a rather high activation temperatur is results is very durable bonds once applied. It can be used well with toner-based prints. This adhesive is great for heat transfer printing onto glas or ceramic products like wine or spirits bottles as well as promotional or cosmetic products made from ABS. Furthermore, it offers self-crosslinking capabilities which increase the adhesion even further. It shows great resistance against water and heat. The particles in this dispersion are fine dispersed and result in even and repeatable results.

Discover the DIGITRAN FlexLine DTF300, an entry-lever 4-head Direct-to-Film (DTF) printer for textile transfer production. ✔ Efficiency and speed: Fast, hassle-free startup with factory-tested machines and optional installation service. ✔ Reliable support: Dedicated service team by phone, email or on-site. ✔ Complete solution: One-stop shop - ink, adhesive, films, parts, etc. Equipped with 2 EPSON i3200-A1 print heads, it prints opaque CMYK and white. The compact design makes this machine fit anywhere. With a film width of 300mm you can print designs as big as DIN-A3, leaving you no restrictions. Due to the digital printing technology it is perfect for small runs and multi-color designs. This makes this printer a perfect tool for small volume productions at low costs. Print high quality transfers for t-shirts, hoodies, bags and more and benefit from us as your one-stop-shop partner for equipment, consumables, and spare parts.

Discover the DIGITRAN FlexLine DTF600x4, a high-speed 4-head Direct-to-Film (DTF) printer for textile transfer production. ✔ Efficiency and speed: Fast, hassle-free startup with factory-tested machines and optional installation service. ✔ Reliable support: Dedicated service team by phone, email or on-site. ✔ Complete solution: One-stop shop - ink, adhesive, films, parts, etc. Equipped with 4 EPSON i3200-A1 print heads, it prints CMYK and white with 2 print heads each. This set-up almost doubles the output compared to a 2-head DTF printer. With a film width of 600mm you can fit any design you need. Automatic cleaning cycles and ink recirculation ensure long print head life. This makes this printer a perfect tool for large output productions at low costs. Print high quality transfers for t-shirts, hoodies, bags and more and benefit from us as your one-stop-shop partner for equipment, consumables, and spare parts.

Water based, pigment ink for DTF (direct to film) printing. ✔ Fine pigment dispersion ✔ OEKO-TEX certified ✔ Great prices ✔ Intense colors ✔ Low clogging ✔ Approved for EPSON i3200-A1 print heads Colors: CMYK+White, Spot colors, fluorescent colors Our DTF inks are tested and approved for DTF printing. With particles smaller than 0.3μm they can be used in a wide range of print heads. The unique formulation creates a perfect balance of color density and drying behavior. By this we make sure that your print heads stay open for as long as possible without sacrificing the opacity of your prints. With spot or fluorescent colors, you can run these inks in 2, 3 and 4 head printers to increase your color gamut or add special effects. The overall compatibility of these inks makes them a great and affordable partner for many adhesives powders and films.

Electric heat press for textile transfers. ✔ Singe platen ✔ Even temperature and pressure ✔ Opens and closes automatically ✔ 30 x 40cm base plate ✔ No compressor ✔ Pull out base plate This neat looking heat press is great for small businesses and DIY. The fully electric heat press is designed for small quantities. Due to its electric closing mechanism, it is easy to operate without exhausting your arm. Using a small display, you can adjust temperature and dwell time to your likings and save pre-sets for reoccurring applications. In automatic mode, a small sensor closes the press once the base plate is pushed in all the way. This press can be used for t-shirts, hoodies, bags, sleeves, legs, bags, neck tags and a lot more. Works perfectly with all kinds of transfers from DTF to screen printed or vinyl.

Manual clam shell type heat press for textile transfers. ✔ Singe platen ✔ Even temperature and pressure ✔ Opens automatically ✔ Up to 50 x 60cm base plate ✔ Magnetic closure ✔ Pull out base plate This quality heat press is great for small businesses. With a long lever it is easy to close this clam shell type heat press. Once closed, a magnet holds the press shut and automatically opens once the set dwell time is reached. The pull-out base makes it even easy to place the textile and transfer. Furthermore, a small gap underneath the base plate allows you to thread the t-shirt onto the platen. Using a small display, you can adjust temperature and a rotary know allows to set the pressure. Last, a special coating on the heated element avoids stains. With a range of different base platens, this press can be used for t-shirts, hoodies, bags, sleeves, legs, bags, neck tags and a lot more.

Pneumatic heat press for textile transfers. ✔ Singe platen ✔ Even temperature and pressure ✔ Opens automatically ✔ Up to 50 x 60cm base plate ✔ Swing away 90° ✔ Pull out base plate This heavy-duty heat press is great for small to medium businesses. Due to its pneumatic closing mechanism, it is easy to operate without exhausting your arm. The pull-out base and the rotatable head make it even easier to place the textile and transfer. Furthermore, a small gap underneath the base plate allows you to thread the t-shirt onto the platen. Using a small display, you can adjust temperature and dwell time to your likings and a valve controls the air pressure. To safely operate the press, two buttons need to be pressed on each side of the machine to lower the heated element. With a range of different base platens, this press can be used for t-shirts, hoodies, bags, sleeves, legs, bags, neck tags and a lot more.

Digitally printed heat transfers for beauty and cosmetic packaging - printed roll to roll. ✔ No MOQ ✔ up to 318mm printing width ✔ Easy to apply ✔ High gloss finish ✔ Photo-realistic prints ✔ Fastest shipping Digital heat transfers are the easiest way to get into digital printing for your products. Therefore, we print them on demand with any design you need. Make use of this product for your beauty and cosmetic primary packaging. From cosmetic tubes to airless dispensers or mascara bottles. Printed in less than 5 days, you will be ready to roll in no time. For the printing itself we use a high-end digital printing press based on toner and combine it with water-based adhesives without UV or VOCs. With this mix we can print details as tiny as 1-point small text. Personalized or serialized prints with safety features are also available. All you need to apply them is a heat transfer or hot stamping machine.

Digitally printed heat transfers for pens & pencils - printed roll to roll. ✔ No MOQ ✔ For all materials ✔ Easy to apply ✔ High gloss finish ✔ Photo-realistic prints ✔ Fastest shipping Digital heat transfers are the easiest way to get into digital printing for your products. Therefore, we print them on demand with any design you need. These transfers are made to adhere to a range of pens and pencils. From plain wood to coated pencils up to PP and ABS pen barrels. Printed in less than 5 days, you will be ready to roll in no time. For the printing itself we use a high-end digital printing press based on toner and combine it with water-based adhesives without UV or VOCs. With this mix we can print details as tiny as 1-point small text. Personalized or serialized prints with safety features are also available. All you need to apply them is a heat transfer or hot stamping machine.