Safety equipment - Import export

• The face shield is made of 1 mm thick Polycarbonate • Excellent optical quality • High resistance to temperature extremes approx. -50°C bis +135°C • Good UV protection • High impact strength • Additional protection of neck an chin due to fully enclosed face shield • Also available with non-fogging treated inner side

• Face shield to protect against class 1 arcing faults (4 kA / 135 kJ/m²) • Tested in accordance with DIN EN166, as well as the GS-ET-29 test principle and is VDE-approved • The electrician´s face shield is made entirely of plastic • The flexible plastic profile fits on many helmets • The visor is manufactured from 1,5mm-thick Polycarbonate • It has excellent optical qualities, and its light transmittance VLT (D65) according to ISO 10527:2007 i ≥75% • The visor can be folded up and can be locked in place in any position by means of a screw connection • The electrician´s face shield is attached in a non-slip manner by means of a wide, adjustable elastic band

• Face shield to protect against class 2 arcing faults (7 kA / 423kJ/m²) • Tested in accordance with DIN EN166, as well as the GS-ET-29 test principle and is VDE-approved • The visor is manufactured from 2,0mm-thick green Polycarbonate • It has excellent optical qualities, and its light transmittance VLT (D65) according to ISO 10527:2007 i ≥75% • For better protection of the ears, the visor is extended toward the back • The visor can be folded up and can be locked in place in any position by means of a screw connection • For protection against heat entering through the bottom edge of the shield, the visor has a chin protection with a Nomex bib

• The face shield is made of 1 mm thick Polycarbonate • Excellent optical quality • High resistance to temperature extremes approx. -50°C to +135°C • Good UV protection • High impact strength • 94% of the radiant heat is reflected by the gold layer • IR-protection shade 4-4

• The face shield is made of 1 mm thick polycarbonate • Excellent optical quality • High resistance to temperature extremes approx. -50°C bis +135°C • Good UV protection • Additional protection of the forehead due to the extended face shield • The face shield fits on the GFKKH100 headgear

• The face shield is made of 1,25 mm thick Cellulose-Acetate • Excellent optical quality • Resistance to temperature extremes up to +90°C • Available with welding protection shade 5 • Good resistance to chemicals • Lower notched impact strength

• The face shield is made of 2 mm thick Polyphenylsulphone (PPSU) • Excellent optical quality • High resistance to temperature extremes up to approx. +220°C • Good UV protection • High impact strength

• This face shield is made of 1 mm thick Polycarbonate • Excellent optical quality • High resistance to temperature extremes approx. -50°C to +135°C • Good UV protection • High impact strength • The face shield has recesses on the side and is a perfect fit on the ear protection hard hat bracket • Also available with non-fogging treated inner side

• The laminated glass is curved and designed for the aluminium window frame 250x150mm (BFKFE003G) • The glass is gold-coated and therefore provides effective protection against radiant heat • The laminated glass protects against splinters if the glass breaks • The glass is extremely heat resistant

• Inspection glass for flip-down goggles with dimensions 59x49mm • Fit into the window of flip-down goggles GFKBR003 / 005 / 007 • Available with various protective filters: • Inspection glass, blue, shade 4-7 • Welding glass, green, in shades 3 to 12 • Clear glass • Polycarbonate • All protective flters are also available as laminated glasses (SPFR) and gold-coated (GBD)

• The face shield is made of 1 mm thick Polycarbonate • Excellent optical quality • High resistance to temperature extemes approx. -50°C to +135°C • Good UV protection • High impact strength • IR-protection shade 4-6 • Additional protection of neck and chin due to fully enclosed face shield

• The wire cloth shield has the dimensions 200x135mm and 2 windows with Ø 50mm • Lenses with Ø of 50mm fit into the sturdy window frames • The lenses are securely clamped in the frame by two steel springs and are easy to change • The wire cloth is surrounded by an aluminium frame • The inside of the goggles is blackened so that the wearer is not blinded by glare from the inside • The Bochumer Brille can be attached to the hard hat by means of a hinge or an aluminium rail

• The wire cloth shield has the dimensions 300x180mm and a window opening • Lenses with the dimensions 60x120mm fit into the sturdy window frames • The lenses are securely clamped in the frame by two steel springs and are easy to change • The wire cloth is surrounded by an aluminium frame • The inside of the goggles is blackened so that the wearer is not blinded by glare from the inside • The Bochumer Brille can be attached to the hard hat by means of a hinge or an aluminium rail

• The wire cloth shield has the dimensions 200x135mm and a window opening • Lenses with Ø of 50mm fit into the sturdy window frames • The lenses are securely clamped in the frame by two steel springs and are easy to change • The wire cloth is surrounded by an aluminium frame • The inside of the goggles is blackened so that the wearer is not blinded by glare from the inside • The Bochumer Brille can be attached to the hard hat by means of a hinge or an aluminium rail

• The goggles are mounted on an aluminium hard hat bracket • The brim of the hard hat does not need to be drilled to attach the goggles • The goggles are easy to attach to the hard hat • Secure fit on the hard hat due to a powerful tension spring • With a hinge and a slotted sliding mechanism, the goggles can be individually adjusted • The side basket are fixed in place so that they do not obstruct the view when the goggles are folded up • The hinged parts are made of galvanized hardened steel • The flip-down goggles are available in two lens sizes: 59x49mm and 62x52mm • In addition to the protective goggles, a face shield can also be attached

• Face shield to protect against class 2 arcing faults (7 kA / 423kJ/m²) • Tested in accordance with DIN EN166, as well as the GS-ET-29 test principle and is VDE-approved • The visor is manufactured from 2,0mm-thick Polycarbonate • It has excellent optical qualities, and its light transmittance VLT (D65) according to ISO 10527:2007 i ≥75% • For better protection of the ears, the visor is extended toward the back • The visor can be folded up and can be locked in place in any position by means of a screw connection • For protection against heat entering through the bottom edge of the shield, the visor has a chin protection with a Nomex bib

• The laminated glass is curved and designed for the aluminium window frame 220x100mm (BFKFE001) • The glass is gold-coated and therefore provides effective protection against radiant heat • The laminated glass protects against splinters if the glass breaks • The glass is extremely heat resistant

• Inspection glass for flip-down goggles with dimensions 62x52mm • Fit into the window of flip-down goggles GFKBR002-1 / 004-1 / 006-1 • Available with various protective filters: • Inspection glass, blue, shade 4-7 • Welding glass, green, in shades 3 to 12 • Clear glass • Polycarbonate • All protective flters are also available as laminated glasses (SPFR) and gold-coated (GBD)

• Lenses with dimensions 60x120mm • Fit into the window of Bochumer Brille BFKBB001 and BFKBB004, as well as the wire mesh visor with window BFKHI008-ALU • Available with various protective filters: • Inspection glass, blue, shade 4-7 • Welding glass, green, in shades 3 to 12 • Clear glass • Polycarbonate • All protective flters are also available as laminated glasses (SPFR) and gold-coated (GBD)

• The goggles are attached to the brim of the hard hat with two screws • With a hinge and a slotted sliding mechanism, the goggles can be individually adjusted • The side baskets are fixed in place so that they do not obstruct the view when the goggles are folded up • The hinged parts are made of galvanized hardened steel • The flip-down goggles are available in two lens sizes: 59x49 mm and 62x52 mm

• The goggles are mounted on an aluminium U-profile • The brim of the hard hat does not need to be drilled to attach the goggles • The goggles are easy to attach to the hard hat • Secure fit on the hard hat due to a powerful tension spring • With a hinge and a slotted sliding mechanism, the goggles can be individually adjusted • The side basket are fixed in place so that they do not obstruct the view when the goggles are folded up • The hinged parts are made of galvanized hardened steel • The flip-down goggles are available in two lens sizes: 59x49mm and 62x52mm

• The face shield is made of 1 mm thick Polycarbonate • Excellent optical quality • High resistance to temperature extemes approx. -50°C to +135°C • Good UV protection • High impact strength • IR-protection shades 4-4 and 4-5 available • Additional protection of neck and chin due to fully enclosed face shield

• The leather mask is suitable for use in welding work, particulary in forced positions • The mask is made of soft cowhide • The welding glasses can be lifted up if needed • The glass holding frame is designed for removable lenses with 50mm diameter • A spring-loaded catch makes it easy to change the lenses • Also available as a version with additional neck protection

• The face shield is made of 1 mm thick Polycarbonate • Excellent optical quality • High resistance to temperature extemes approx. -50°C to +135°C • Good UV protection • High impact strength • IR-protection shades 4-4 and 4-5 available • Additional protection of neck and chin due to fully enclosed face shield

Impressive development of the SHS series is assured with the design of the SHS3 switch. Having to replace the safety hinge switch whenever the equipment is bumped or damaged due to mechanical stress is unnecessary thanks to the solution offered by the SHS series. The hinge setting can be corrected even after the switching point is set. This process can be done with the assistance of the integrated adjustment system. The hinge switch is also reusable even when the system itself needs to be converted. Thanks to change kits, the operator can redefine the switching point without compromising the IP 67 protection rating.

The magnetic Lifter /crane (magnetic hoist) uses high performance magnetic materials to make it smaller, lighter and more attractive. Unique magnetic circuit design, remanence is almost zero. The safety factor is high and the maximum pullout force is 3.5 times the rated lifting force. The handle switch is equipped with safety button, which can be operated by one hand and is convenient and safe. The bottom of the crane has a "V" groove design. The corresponding round steel and steel plate can be hoisted. No electricity, permanent magnetic force, safe use. It can be widely used in field operation, lifting and handling of steel, installation and handling of flat mechanical parts and various moulds. It is mainly used in the process of lifting, connecting, loading and unloading and handling of magnetic conductive materials of block, column and other parts. Especially for other lifting tools because of the inconvenience of fixed and laborious objects

Scope of application Magnetic filter rod (magnetic rod) is mainly used to remove ferromagnetic impurities in powder, granular and liquid or slurry. It is widely used in ceramics, power, mining, plastics, chemical industry, rubber, pharmaceuticals, food, environmental protection, pigments, dyes, electronics, metallurgy and other industries. Working Principle The magnetic rod is made of high quality stainless steel pipe and high B value rare earth alloy NdFeB, and is made by special manufacturing method. The magnetic filter can be assembled on a fixed frame to form a magnetic filter. When the material containing iron passes through, it is attracted by the magnetic rod, and the material containing iron is firmly adsorbed on the wall of the magnetic rod. To ensure the integrity of equipment and product safety. Product features energyfree, pollutionfree, can be installed in any position on the production line with material contact, saving space, easy installation.

Very robust constructions to protect supply lines - Cable bridge - Hose and cable bridge - Rubber ramp system - Protection mat for events - Ramp system - End piece without adapter - End piece with adapter - Angle 45º with adapter

Email : trasmme@gmail.com SKYPE : TRAS MM ============================== LEAD INGOTS Often lead ingots are purchased by enthusiasts who wish to cast their own items, such as lead bullets and lead fishing sinkers and other lead ballast applications. Care should be taken when casting with lead. Melting lead and casting lead objects can expose you and others in the area to lead, which is known to be a health hazard. Protect yourself by using all available safety equipment. The fumes coming off the melting lead can be a significant health issue; therefore you should never melt lead without strong ventilation. Lead ingots can be manufactured to required purity levels or as alloys of Antimony and Tin with defined properties. This can be specified so that the lead ingots meet the application requirements.