Ropes - Import export

round wires for crane ropes, lift ropes, lifting systems, mining ropes, forestry applications, architectural ropes, ropes for automotive and aviation, special ropes for offshore technology, profile wires for special applications, fully locked / semi-locked ropes for tensioning systems, mountain railways, transport systems, profile wires for reinforcements in the offshore sector.

secutex protection also for wire ropes secutex protective sleeves in combination with Spanset lifting slings are always the best choice for lifting machinery elements and other loads. Because of the design, the lifting slings are wide, the load is distributed over a relatively large area. But sometimes secutex protective sleeves are also required for wire ropes. The wire ropes have an almost round diameter, the surface area to the load is rather small and the stress per area is high. In general, the use of wire rope sleeves can only be recommended for the lifting of large, round loads, i.e. without sharp or angular edges. There are slotted and also unslotted secutex wire rope protective sleeves available for one or two strands. The slotted variants can easily be assembled afterwards, the closed types, on the other hand, have to be installed during the manufacture of the wire ropes. Please note that the wire ropes often have a larger diameter than the nominal size

• For cutting wire ropes and steel wire without any burr or splaying • For wire ropes 1570 N/mm² • Cutting edges inductively hardened • With optimum leverage for easy and effortless work • Handles made of precision steel tube • Insulation according to DIN EN/IEC 60900

Because of their specifications governed by corresponding standards, these cable pull switches are used exclusively as safety command devices. These switches are available in metal enclosures as well as in insulation-enclosed versions. They are operated manually by pulling on the attached cable. The basic design of the standard rope pull switches is based on that of position switches. — Versions available in plastic and metal — With and without latching function — Max. span length: 2 x 75 meters — Protection class IP 65 according to IEC/EN 60529 — Ambient temperature -30°C to +80°

Item No.: 335023 Guy rope Specification Guy rope Braided elastic with buttonholes, with stitched-on plastic hook Model type: C (Customised) Dimension: approx. 20.0 mm wide Material: Rayon Colour: natural white Property: elastic Elastic Material: Natural rubber Packaging: in PE bag Note Features: Buttonholes made during braiding process, stitchable plastic

Demag rope hoists feature high handling rates, cost-effective operation and maximum safety. As basic hoist units for integration into plant and machinery or as lifting solutions with electronic controls that are optimized for crane applications, with our wide range of rope hoists we offer the optimum solution to meet our customers' specific requirements for efficiently lifting loads weighing up to 100 tonnes.

Simplex-, Duplex-clamps, wire rope clips, various turnbuckles, thimbles made from stainless steel

Wire rope clip similar DIN 741 Simplex-, Duplex-clamps, wire rope clips, egg shaoed wire rope clips, varous turnbuckles,thimbles, rope shortenings made from steel and ferrules made from aluminium

Wire rope clip similar DIN 1142 Simplex-, Duplex-clamps, wire rope clips, egg shaoed wire rope clips, varous turnbuckles,thimbles, rope shortenings made from steel and ferrules made from aluminium

Rope suspensions with wedge sockets in special design ATTENTION: The strength of the threaded rod must be in accordance to the strength of the wire rope. L2 =Standard lengths of the threaded rods are in mm, further lengths possible When ordering, the required length of the eye bolts is to be incorporated into the item-no as per following example: rope suspension type A for 8 mm rope diameter and a threaded rod of 310 mm: KG1 0800 A0 310 SSN

Rope suspensions with wedge sockets in special design ATTENTION: The strength of the threaded rod must be in accordance to the strength of the wire rope. L2 = Standard lengths of the eye bolts are in mm, further lengths possible When ordering, the required length of the eye bolts is to be incorporated into the item-no as per following example: rope suspension type A for 8 mm rope diameter and a threaded rod of 310 mm: KG1 0800 A0 310 SSN

Rope suspensions with wedge sockets acc. to DIN 43148 The wedge sockets acc. to DIN 43148 are not suitable for the use in areas liable to frost. ATTENTION: The strength of the eye bolt must be in accordance to the strength of the wire rope. L2 =Standard lengths of the eye bolts are in mm, further lengths possible When ordering, the required length of the eye bolts is to be incorporated into the item-no as per following example: rope suspension type A for 9 mm rope diameter and an eye bolts length of 800 mm: KK2 0912 A0 800 148

Rope suspensions with wedge sockets acc. to DIN EN 13411-6 ATTENTION: The strength of the eye bolt must be in accordance to the strength of the wire rope. L2 =Standard lengths of the eye bolts are in mm, further lengths possible When ordering, the required length of the eye bolts is to be incorporated into the item-no as per following example: rope suspension type A for 18 mm rope diameter and an eye bolts length of 800 mm: KK2 1800 A0 800 411

Rope suspensions with wedge sockets acc. to DIN 43148 The wedge sockets are not suitable for the use in areas liable to frost. ATTENTION: The strength of the eye bolt must be in accordance to the strength of the wire rope. L2 =Standard lengths of the eye bolts are in mm, further lengths possible When ordering, the required length of the eye bolts is to be incorporated into the item-no as per following example: rope suspension type A for 9 mm rope diameter and an eye bolts length of 800 mm: KK2 0912 A0 800 148

Rope suspensions with rope sockets acc. to DIN EN 13411-7 ATTENTION: The strength of the eye bolt must be in accordance to the strength of the wire rope. * Spring buffers only without collar, similar to picture L2 = Standard lengths of eye bolts are in mm, further lengths possible When ordering, the required length of the eye bolts is to be incorporated into the item-no as per following example: rope suspension type A for 8 mm rope diameter and an eye bolts length of 450 mm: SS1 0608 A0 450 315

Rope suspensions with rope sockets acc. to DIN EN 13411-7 ATTENTION: The strength of the eye bolt must be in accordance to the strength of the wire rope. * upon request only L2 =Standard lengths of the eye bolts are in mm, further lengths possible When ordering, the required length of the eye bolts is to be incorporated into the item-no as per following example: rope suspensions type A for 8 mm rope diameter and an eye bolts length of 450 mm: SS1 0608 A0 450 315

Rope sockets formerly acc. to DIN 15315 but made of stainless steel, polished (material no.:1.4571/inox) ATTENTION: The strength of the eye bolt must be in accordance to the strength of the wire rope. All dimensions similar to rope sockets for lifts acc. to DIN EN 13411-7. Please find instructions in our download area:

Rope sockets similar to DIN EN 13411-7 galvanized surface ATTENTION: The strength of the eye bolt must be in accordance to the strength of the wire rope. Casted symmetric rope sockets: These symmetric rope sockets for rope end terminations are only to be used when subordinate demands are made. The fulfilment of requirements are to be checked combined with the rope, which shall be used with the rope socket, whenever legal and/or safety technical demands for these rope sockets are made. The rope sockets are not appropriate for ropes of more than 1770 N/mm² single wire strength. Please find certificates and instructions in our download area:

Rope sockets for lifts acc. to DIN EN 13411-7 galvanized surface ATTENTION: The strength of the eye bolt must be in accordance to the strength of the wire rope. *cast design similar to DIN EN 13411-7 ** longer strap for a better assembly of ropes with a diameter of 24/25 mm Rope sockets acc. to DIN EN 13411-7 are not appropriate for ropes of more than 1770 N/mm² single wire strength Please find certificates and instructions in our download area:

Wire rope clips similar to DIN 741 for minor purposes * The nominal size corresponds to the maximum rope diameter. ** The minimum quantity refers to the required number (acc. to DIN) of wire rope clips.

Wire rope clips with shortened bracked to safe the dead end of ropes at asymetric wedge sockets * The nominal size corresponds to the maximum rope diameter.

Wire rope clips formerly acc. to DIN 1142 Have attention to the note in the download area. * The nominal size corresponds to the maximum rope diameter. ** The minimum quantity refers to the required number (acc. to DIN) of wire rope clips. *** similar to DIN

spring collars for rope suspensions with rope sockets acc. to DIN EN 13411-7 galvanized finish A B C D for spring item-no. item-no. FT1 0016 90 056 000 56 52 16,9 9,5 DF0 0608 D2 000 SSN DF0 0911 D3 000 SSN

Spring buffers for rope suspensions excellent buffering properties material: celled polyurethane-elastomer *spring buffer with collar F= maximum load in [N] If you do not explicitly require a different version, we always deliver suspensions with one buffer with collar. If several buffers are needed, the uppermost buffer is with collar.

BERNSTEIN AG manufactured SR and SRM safety cable pulling switch devices as per IEC 947-5-5, DIN EN 60947-5-5 and ISO 13850 standards. These technical demand that when 'actuation' or the act of the breakage of the cable, there is automatic lock out as the switch moves to stop position, and reset for further use.

Whether on the conveyor belt or on the machine – when maximum safety is required, BERNSTEIN rope pull switches provide a proven and reliable technical solution.The switches can be deployed flexibly, are easy to install and convenient to handle.And most importantly: they offer maximum safety when it is needed. The SR series of safety rope pull switching devices are designed and approved in accordance with the standards IEC 947-5-5, DIN EN 60947-5-5 and ISO 13850. On actuation or in the event of cable breakage, the emergency stop switching device locks automatically and can only be reset to its initial setting by using the resetting device on the switch. • Protection class IP67 • Stable and durable plastic housing (PA 6 GV) • Can be deployed at temperatures between –25 °C and +70 °C • Flexible handling with three M20 x 1.5 cable entries • Easy installation due to the maximum connection space • Up to four positively driven NC contacts

When it comes to maximum safety on the assembly line, in the production line, or directly at the machine, the Safety Rope Pull Switches from BERNSTEIN AG are a reliable and proven solution. BERNSTEIN has added a particularly small and compact version to the product family of safety rope pull switches. Thanks to its modular design, the SRO (Safety Rope Pull) is extremely space-saving as well as being highly versatile. The modular principle has the advantage of always being able to offer exactly the right product for a specific customer application.

Use one of these mobile kernmantle cable systems to temporarily install a horizontal lifeline system on a pitched or flat roof. This lanyard is equipped with freely-moving carabiner hooks and is available in 3 lengths: 15 m (1 hook), 23 m (2 hooks) and 30 m (3 hooks). EN 795:2012 & CEN/TS 16415:2017 EN 353-2:2002 & EN 358:2000 Sharp edge-tested kernmantle cable (Ø 12 mm) acc. RFU CNB/P/11.075 Incl. energy absorber and adjustable rope shortener Secures up to 4 individuals Incl. spliced carabiner hooks which move freely along the cable (15 m = 1 hook, 23 m = 2 hooks, 30 m = 3 hooks)

This guided-type fall arrester should be a permanent component of your PPE kit. This connector is based on a sharp edge-tested kernmantle cable (Ø 12 mm) and includes a rope shortener, energy absorber and 2 carabiner hooks. It has been specially designed for users who work high up and weigh less than 140 kg (incl. kit). EN 353-2:2002 & EN 358:2000 Sharp edge-tested kernmantle cable (Ø 12 mm) acc. RFU CNB/P/11.075 Incl. energy absorber and adjustable rope shortener Max. load-bearing capacity: 140 kg Available lengths: 5 m, 10 m, 15 m and 23 m (there is also an optional model available with specially-designed carabiners for temporary usage in a lifeline system) Our model with a DBI carabiner was designed for usage with our optional accessory ABS UP-System