Rolled steels - Import export

Hot rolled steel products are rolled from casting slab and produced as a coil. We are supplying materials with thicknesses between 1-25mm and width up to 2000mm as a coil, slitted or cut to length sheets. Our stock includes hot rolled sheet materials produced according to EN 10025-2, EN 10028-2, EN 10149-2, SAE J403, ASTM A283, EN 10083-2, ASTM A1011, EN 10111, EN 10025-4, DIN 1614- 1 and others.

Cold rolled steel sheets are produced by re-rolling process of hot rolled steel sheets in order to provide precise thickness distribution across the coil. The surface roughness of the cold rolled materials is lower compared to hot rolled steels and suitable for painting and coating applications. According to the customers demands, it can be supplied in coil, slitted and cut to length sheet form. Our stock includes cold rolled steel sheet materials produced according to EN 10130, EN 10268, EN 10338, EN 10209 and others.

Hot rolled steel is a type of steel that is formed by the hot rolling process at a temperature above its recrystallization temperature. Steel is easier to form at this elevated temperature. Compared to cold rolled steel, hot rolled steel does not usually require heat treatment after forming. Hot rolled steel usually has more mill scale than cold rolled steel.

Cold rolled steel is low carbon steel produced by a "cold rolling" process and processed at near normal room temperatures. Cold rolled steel offers superior strength and machinability. Cold rolled steel sheets are often used for engineering products where close tolerances, concentricity, surface smoothness and coated surfaces are required.

EN 10149-2 Thermomechanically Rolled Steels : S315MC, S460 MC, S 500MC, S 700MC EN 10149-3 Normalized or Normalizing Rolled Steels : S260NC – S 420 NC

EN 10025 1-2-5 Non Alloyed Steel Products for Structural uses S 185 JR, S 185 JO, S 185J2, S 185 K2, S 235JR, S235JO, S235J2, S 235K2, S 275JR, S 275JO, S 275J2, S 275K2, S 355JR, S 355JO, S 355J2, S 355K2, S 355JOW, S 355JOWP EN 10149 1-2-3 / SEW 092 Hot Rolled Steel Products with a High Yield Quality for Cold Forming S315MC, S 355MC, QSTE380TM, S 420MC, S 460MC, S 500MC, S 550MC, S 600MC, S 700MC, S 260NC, S 315NC, S 355NC, S 420NC EN 10111 Hot Rolled Steel Products with a Low Carbon Content for Cold Forming DD11, DD12, DD13, DD14 Non Alloyed Steel Products with Surface in Relief (tear-drop and chequered pattern sheets)

Flat steel products in roll or sheet forms obtained by cold-rolling of hot-rolled flat steel, with thicknesses ranging from 0.20 to 2.00 mm. meeting the expectations concerning the surface flatness and the width and thickness variation and the physical properties of the produced materials fully remain homogenous. Common Grades; As per EN 10130 DC01/DC03/DC04 , ASTM A619/DQ, SAE 1010 /1008/1006

We supply the following I beams in various dimensions and qualities acc. to DIN 1025-2 IPB (HEB) 100-1000 IPB I (HEA) 100-1100 IPBV (HEM) 100-1100 IPB IL (HEA A) 100-1100 DIN 1025-2: Hot rolled I-beams - Part 2: Wide flange I-beams, IPB-serie; dimensions, masses, sectional properties EN 10163-3: Delivery requirements for surface condition of hot rolled steel plates, wide flats and sections; part 3: Sections CHANNELS ( UNP /UPE) Sizes ; UPE 80-400 UNP 50-400 We supply the following channels in various dimensions and qualities with surface condition: according to EN 10163-3: 2004, class C, subclass 1

direct mounting to our Gripper Feeds, series ZVTMB or similar products with mounting bracket very costeffective flattening of the coil set best results through adjustment of both top straightening rolls rolls made of special steel and hardened and ground

Our universal cranes give you the certainty of quality, efficiency and reliability at the highest level. Every crane and every crane component reflects decades of crane expertise and reliability as a partner for the industry. Our product portfolio includes single and double-girder overhead travelling cranes and suspension cranes. Besides universal cranes with welded box-section girders, we also offer solutions with rolled steel sections. Our wall-mounted travelling cranes and crane sets, which are tailored to meet specific customer needs, round off our range. With our assistance and convenience functions, our cranes provide safety and support during operation.

Unalloyed structural steel according to DIN EN 10025-2 (S 235/S275/355 JR/JO/J2/K2 +N/M/AR ) Fine grained structural steel according to DIN EN 10025-3 (S275/355/420 /460 N/NL …) EN 10025-4 Thermo-mechanical Rolled Structural Steels (S 275/355/420/460 ML ) EN 10025-5 Structural Steels with Improved Atmospheric Corrosion Resistance (S 235/355 JOW/JOWP/J2W/J2WP/K2W) EN 10025-6 High Yield Quenched and Tempered Fine Grain Steel (S 460/690/890/960 Q/QL/QL1)

• For fixing reinforcement steel with binding wire from a roll • Fast, reliable and cost-effective drilling and cutting of the wire in a single operation • Cutting edges inductively hardened • Handles coated with plastic • Made of tool steel, forged, oil-hardened

• For fitting extarnal circlips on shafts • With 90° angled jaws • With exchangeable tips made of special steel • Anti-slip, twisted precision tips • With retainer • Handles made of solid rolled steel

• For fitting internal circlips in holes • With straight jaws • With exchangeable tips made of special steel • Anti-slip, twisted precision tips • With retainer • Handles made of solid rolled steel

• For short, straight and figure cuts, small radii • Special cutting geometry and precision cutting for a clean cut without any burrs • Cutting edge hardness 60-62 HRC • Micro-serrated cutting edge prevents slipping off during cutting • Re-adjustable screw-joint • With optimum leverage for easy and effortless work • With opening spring and catch • Handles made of solid rolled steel • Ergonomically multi-component safety handle for better handling • Made of tool steel, forged, oil-hardened

• For short, straight and figure cuts, large radii • Special cutting geometry and precision cutting for a clean cut without any burrs • Cutting edge hardness 60-62 HRC • Micro-serrated cutting edge prevents slipping off during cutting • Re-adjustable screw-joint • With optimum leverage for easy and effortless work • With opening spring and catch • Handles made of solid rolled steel • Ergonomically multi-component safety handle for better handling • Made of tool steel, forged, oil-hardened

-suitable for charging retention basins, depots for hazardous materials, drum stacking pallets etc. -with a towing bar -swivel castors Ø 180 mm, fixed castors Ø 80 mm -Type FHR 600 G for steel bunghole drums, steel drums with a lid, steel rolling hoop drums, plastic l-ring drums, plastic double l-ring drums, plastic drums with a lid, rectangular drums and conical drums with a lid ranging from 110 to 220 litres also open drums -individual construction on request: e.g. stainless steel for “ex”-zones in compliance with “ATEX 95”

Form: sheet Material: 1.4404 (X2CrNiMo17-12-2) Manufacturing method: cold-rolled, 2B Surface finish: pickled Norm: EN 10088 eClass 9.1: 35010511 UNSPSC 11.2: 30102505 Dimensions: Gauge (mm): 0.8 - 6 Length (mm): 2,000 - 4,000 Width (mm): 1,000 - 2,000

Shape: sheet Material: 1.4301 (X5CrNi18-10) Type of manufacture: cold-rolled, 2G Surface finish: ground Standard: EN 10088-2 Grain: Grit 320 Ground sides: one-sided eClass 9.1: 35010511 UNSPSC 11.2: 30102505 Dimensions: Thickness (mm): 0.8 - 2 Length (mm): 2,000 - 3,000 Width (mm): 1,000 - 1,500

Form: sheet Material: 1.4828 (X15CrNiSi20-12) Manufacturing method: hot-rolled, 1D Surface finish: pickled Norm: EN 10095 eClass 9.1: 35010511 UNSPSC 11.2: 30102505 Dimensions: Gauge (mm): 4 - 15 Length (mm): 2,000 - 3,000 Width (mm): 1,000 - 1,500

Shape: sheet Material: 1.4462 (X2CrNiMoN22-5-3) Method of manufacture: hot-rolled, 1D Surface finish: pickled Standard: EN 10088-2 eClass 9.1: 35010511 UNSPSC 11.2: 30102505 Dimensions: Thickness (mm): 4 - 10 Length (mm): 2,000 - 3,000 Width (mm): 1,000 - 1,500

Form: sheet Material: 1.4828 (X15CrNiSi20-12) Manufacturing method: cold-rolled, 2B Surface finish: pickled Norm: EN 10095 eClass 9.1: 35010511 UNSPSC 11.2: 30102505 Dimensions: Gauge (mm): 1 - 3 Length (mm): 2,000 - 3,000 Width (mm): 1,000 - 1,500

Shape: sheet Material: 1.4301 (X5CrNi18-10) Type of manufacture: cold-rolled, 2G Surface finish: ground Standard: EN 10088-2 Grain: Grit 240 Ground sides: one-sided Dimensions: Thickness (mm): 0.6 - 8 Length (mm): 2,000 - 6,000 Width (mm): 1,000 - 2,000 Factory filming: Film 4228, Standard film, Laser protection film

Shape: sheet Material: 1.4016 (X6Cr17) Type of manufacture: cold-rolled, 2R Surface condition: bright annealed Standard: EN 10088 Dimensions: Thickness (mm): 0.5 - 3 Length (mm): 2,000 - 3,000 Width (mm): 1,000 - 1,500 Factory filming: Standard film, no film, Laser protection film/without stamp, no paper

Form: sheet Material: 1.4571 (X6CrNiMoTi17-12-2) Manufacturing method: hot-rolled, 1D Surface finish: pickled Norm: EN 10088-2 eClass 9.1: 35010511 UNSPSC 11.2: 30102505 Dimensions: Thickness (mm): 3 - 12 Length (mm): 2,000 - 4,000 Width (mm): 1,000 - 2,000

Shape: round Material: 1.4571 (X6CrNiMoTi17-12-2) Type of production: hot-rolled Surface: untreated Standard: EN 10095 eClass 9.1: 35010312 UNSPSC 11.2: 30102405 Dimensions: Diameter (mm): 25 - 400 Length (mm): 5,000

Shape: round Material: 1.4841 (X15CrNiSi25-21) Type of production: hot-rolled Surface: untreated Standard: EN 10095 eClass 9.1: 35010312 UNSPSC 11.2: 30102405 Dimensions: Diameter (mm): 60 - 75 Length (mm): 5,000

Shape: round Material: 1.4541 (X6CrNiTi18-10) Type of production: hot-rolled Surface: untreated Standard: EN 10088 eClass 9.1: 35010312 UNSPSC 11.2: 30102405 Dimensions: Diameter (mm): 30 - 120 Length (mm): 5,000

Shape: round Material: 1.4404 (X2CrNiMo17-12-2) Type of production: hot-rolled Surface: peeled Standard: EN 10088 eClass 9.1: 35010312 UNSPSC 11.2: 30102405 Dimensions: Diameter (mm): 160 - 250 Length (mm): 5,000