Repair & maintenance - Import export

If the service is right, every production plant will work economically for many years. We offer you a qualified repair and maintenance service, even for older machines and third-party products. Our service technicians will look after you quickly and anywhere with fully equipped vehicles. We pay attention to the good training of our personnel. Experienced mechanics, locksmiths or electronics specialists offer you every support to ensure the perfect functioning of the delivered systems. Our plant service – also for older machines and other manufactures!

Save time when ascending to carry out maintenance and repair work to your turbine. With a Gservicelift you can complete a 100 meters ascent in approx. 5 minutes. Without a Gservicelift on the other hand, the arduous climb requires very much more time and demands a lot of strength. But this is not the only argument which clearly speaks for itself. Heavy tools and loads up to 400 kg can be transported comfortably with a Gservicelift, and all this with automatic transport, which does not take up the costly time of your personnel for the ascent. It is well proven, that wind power plants with an integrated ascent system have a higher level of availability and that the quality of your turbine maintenance will increase enormously.

Discover the easy handling of our Pressure Transmitter and Reader of the PT-RF series. The PT-RF series of pressure transmitters are an alternative solution for universal pressure measurements for fluid technology applications, which will provide benefits for system operators, maintenance personnel and repair technicians as well as for original equipment manufacturers. The advantages resulting from the use of the new technology for system operators, maintenance personnel and repair technicians are clear: Measurements can be carried very easily, without extensive training and within a few seconds at the press of a button and then documented in a reliable process. Unscrewing and re-installing pressure gauges or other measuring and display devices – practically a temporary opening of the system – is not required. Potential hazards for people, machines and the environment, for example from emitted residual oil in the test hose or leaks at the measuring point, as well as ingress of...

Repair or maintenance of fans. Repairs Fan impellers are often subject to high degrees of wear due to the solids in the conveying medium. Preventative maintenance helps to save costs, because a completely destroyed impeller can only be replaced by a new one. An impeller that is only partly damaged can easily be repaired and is comparable to a new impeller with regard to its subsequent service life. Naturally we also repair fans not made by us. Balancing and inspection of bearings The increasing demands on the performance, smooth running, weight, quality and life span of machines mean that increasing importance is also attached to mechanical vibrations. Balancing helps in most cases to eliminate the vibrations or at least to reduce them to an acceptable level. The fact that mechanical vibrations are not only unpleasant but also damaging is shown by a drastic shortening of the lifetime of gearboxes and roller bearings as well as the occurrence of fatigue fractures or unacceptable noise. The diagnosis is imbalance or bearing damage. Both causes result in elaborate repair work. While the bearings can be exchanged by the user’s service technicians, external services are required for the balancing of a fan impeller, since a balancing machine and special know-how are needed for this. Rippert uses state-of-the-art balancing machines in accordance with DIN ISO 1940 for this. Stationary balancing Rotor size: max. DN 4,000 mm Rotor weight: max. 10,000 kg Measuring procedure: force measurement Balancing quality: Q 6.3* * other qualities on request On-site balancing In addition to stationary balancing in the factory, Rippert also offers on-site balancing. This saves elaborate disassembly and assembly work as well as time-consuming and, depending upon size of the impeller, expensive transport.

The safe and efficient construction and operation of gas transmission systems calls for complex decisions; there are a number of prerequisites that must be met. This applies to many areas such as material selection, component design and sizing, well-founded assessments of the condition of pipelines and facilities based on various test procedures, the determination of the repair and maintenance work required as well as quality assurance for materials, procedures and personnel. We offer a comprehensive service portfolio in this area, based on the experience and know-how gained from the operation of our pipeline network and the technical infrastructure available for this purpose.

-sturdy construction made of round pipes -nonslip access safety platform -number of persons permitted: 2 -through fork sleeves with safety mechanism to prevent slipping -underrun protection device ensures pick-up via fork sleeves -with galvanized tool deposit -approved by the german technical inspection agency “TÜV”, in compliance with the "BGV" (German accident prevention regulations) Types available -Type SIKO picked up lengthwise by a forklift truck -Type SIKO/L picked up crosswise by a forklift truck Accessory -2 swivel + 2 fixed polyamide castors Ø 180 mm, one swivel castor with brake - construction height 220 mm

-sturdy construction made of round pipes -nonslip access safety platform -number of persons permitted: 2 fork sleeves with safety mechanism to prevent slipping -with galvanized tool deposit -approved by the german technical inspection agency “TÜV”, in compliance with the "BGV" (German accident prevention regulations)

VENTAPP radial fans are used in wood-processing plants where air or loaded air is conveyed under increased pressure. They convey gases, bres, and particles; they are used for wetting, drying or ltering of media. In energy plants, in bre drying, for mat formers and dust extraction systems they form integral parts of Siempelkamp plants. Features Pressures beyond 20,000 Pa Temperatures up to 700 °C Impeller wheel diameters up to 3,150 mm Circumferential speed up to 200 m/s Gas-tight and pressure-resistant design ATEX Advantages High eciency Smooth operation Robust design Low caking, high wear resistance High dependability and operational safety Diverse accessories Maintenance and repair service Variants Drive type Casing positioning Size of all components Angular position Material Colour

The implementation of impact absorber stations provides effective protection against damage to the conveyor belt in the loading area. The belt is often pierced by sharp, large and bulky goods. Specially manufactured stations supporting impact bars absorb the impact speed. Repair and maintenance costs are thus reduced. In addition, the life expectancy of the conveyor belt and conveyor system is extended as well as the operating conditions significantly improved. Further advantages no jammed rollers causing belt misalignment absorb the drop energy, support the conveyor belt instead of the conveyor rollers in the transport area of the conveyor system and make a reliable running of the belt possible whilst ensuring the least possible friction. infinitely variable alignment to the angle of inclination by means of spindle displacement possible better material sealing due to adjustment of the material guide to within a millimetre

Practical system push fittings with safe and innovative lock function from copper alloys for use in a system with SANHA MultiFit®-Flex and MultiFit®-PEX multi layer plastic tubes for hygienic drinking water and reliable heating installations.  Due to their sophisticated construction, SANHA system push fittings offer an especially safe and durable connection and are just as tight as press fittings. The push connection is easy to make and has the distinct advantage that no tools are required. In this way, using 3fit®-Push fittings incurs no cost for buying, repairing or maintenance of press machines. 3fit®-Push system fittings are ideally suited in narrow spaces where it might be difficult to press fittings with jaws or slings such as during the renovation of buildings.