Release - Import export

Release agent H1 (art. no. 9519000) is used to release patterns and moulds. Release agent H1 is applied in a thin coat with a brush or a soft sponge. After the solvent has evaporated, a release film is formed.

ALWA release wax (art. no. 9516000) is used to release patterns and moulds. ALWA release wax is applied in a thin coat with a brush or a soft sponge. After the solvent has evaporated, a polishable release film is formed.

ALWA release spray (art. no. 9515000) is used to release patterns and moulds. After the solvent has evaporated, a strong release film is formed. ALWA release spray may not be polished.

ALWA release lacquer (art. no. 9510000) is used to release patterns and moulds. ALWA release lacquer is applied in a thin coat with a brush or a sponge. A thin coat of ALWA release lacquer can also be sprayed on with a conventional spray gun. We recommend to spray on approx. 2 to 3 layers. After approx. 20 min. a strong release film is formed. The drying process can be accelerated by hot air.

Heat transfer films for easy to peel heat transfers. ✔ Easy peel ✔ High-gloss finish ✔ Great price ✔ Thermally stabilized ✔ Hot or cold peel! Our release film SHIELD SR is created to be used with toner based printing technologies. The 23um thick PET film is coated with our unique SHIELD SR release coating, which add gloss and protection to your prints. Furthermore, the transfer film leaves you to choose in-between a quick hot peel straight after application or to peel it with a delay. The SR version is designed as an all-rounder, combining good resistance against cremes, water and mechanical damage. The standard core size is a 6'' core with a film length of 3000m per roll. Custom rolls can be made.

Item No.: 685795 Release strap Specification Release strap Webbing, with narrow-wide transition, stitched into strap Model type: C (Customised) Dimensions: approx. 20.0 mm wide Material: Polyester Colour: black Property: non-elastic Packaging: loose in cardboard box Note Features: With narrow-wide transition

Master patterns must be treated with ALWA surface tension remover (art. no. 9500000), so that the ALWA release lacquer does not roll off. ALWA surface tension remover is applied in a thin coat with a brush or a sponge. After approx. 10 min. the solvent is evaporated and ALWA release lacquer can be applied.

Item No.: 985603 Webbing as release strap Specification Webbing PP webbing, flame-retardant finish Model type: C (Customised) Dimensions: approx. 25.0 mm wide Material: Polypropylene Colour: red Property: non-elastic Packaging: rolled

Item No.: 685621 Release strap with bowden cable Specification Release strap Webbing, with holes, stitched into strap, with bowden cable Model type: C (Customised) Dimensions: approx. 15.0 mm wide Material: Polyester Colour: black Property: non-elastic Packaging: loose in cardboard box

Item No.: 985601 Seat release strap Specification Seat release strap Combination of webbing and braided elastic with elongation limiter, with holes, stitched Model type: C (Customised) Dimension: approx. 20.0 mm wide Material: Polypropylene Colour: black Property: elastic/non-elastic Elastic Material: Natural rubber Packaging: loose in cardboard box

Item No.: 985603 Safety strap as release strap Specification Safety strap PP webbing, flame-retardant, length: approx. 260 mm +/– 5 mm Model type: C (Customised) Dimensions: approx. 25.0 mm wide Material: Polypropylene Colour: red Property: non-elastic Packaging: rolled Note Features: Holed and slotted by laser

Item No.: 985603 Pull strap as release strap Specification Pull strap Webbing, cut to length, with imitation leather handle, stitched into strap Model type: C (Customised) Dimensions: approx. 25.0 mm wide Material: Polypropylene/imitation leather Colour: red/black Property: non-elastic Packaging: loose in cardboard box

The swivel motors with attached hydraulically released spring-applied multi-disc brake are recommended if a swivel position must remain unchanged once it has been reached – even over an unlimited period of time – despite the effect of a load torque. The brake is used solely to hold the load. It should only be noted that large transmission delays in the lines can cause time differences between the switching off of the swivel motor and the application of the released brake caused by spring force. In order to provide our customers with the right drive for all areas of application, the HSB swivel motor is available in a total of 5 different versions. We have listed the most important data below. You can find all further details in our data sheet.

Material Carbon Steel Surface Finishing Zinc-Nickel Standard Seal Material(s) NBR (Buna-N®) Working Temperature -25° C ... +100° C / -13° F ... +212° F Valve Design Poppet Valve Connection Screw Disconnection Screw Connect Under Pressure not allowed Application Industrial Hydraulic ISO Interchange -

Material Stainless Steel V4A (AISI 316) Surface Finishing - Standard Seal Material(s) FKM (Viton®) Working Temperature -25° C ... +200° C / -13° F ... +392° F Valve Design Poppet Valve Connection Screw Disconnection Screw Connect Under Pressure Male Tip and Female Body allowed Application Industrial Hydraulic, Offshore, Rescue and Tensioning Hydraulics ISO Interchange -

Material Carbon Steel Surface Finishing Zinc-Nickel Standard Seal Material(s) NBR (Buna-N®), PTFE Working Temperature -20° C ... +100° C / -4° F ... +212° F Valve Design Flat Valve Connection Screw Disconnection Screw Connect Under Pressure not allowed Application Construction Machinery ISO Interchange -

Material Carbon Steel Surface Finishing Zinc-Nickel Standard Seal Material(s) HNBR, FKM (Viton®), PTFE Working Temperature -20° C ... +100° C / -4° F ... +212° F Valve Design Poppet Valve Connection Screw Disconnection Screw Connect Under Pressure not allowed Application Construction Machinery ISO Interchange -

Material Carbon Steel Surface Finishing Zinc-Plating and Thick-Film-Passivation (Chrome III) Standard Seal Material(s) NBR (Buna-N®) Working Temperature -25° C ... +100° C / -13° F ... +212° F Valve Design Poppet Valve Connection Screw Disconnection Screw Connect Under Pressure Male Tip/Female Body up to 33% of the Working Pressure with Tools Application Construction Machinery ISO Interchange ISO 14541 (BG 1-6)

Description The multi-coupling has been created for connecting and disconnecting several hydraulic lines at the same time. This is done by an operating lever the guide crank of which is designed for a minimum of operating force. The connection of the hydraulic lines is done with flat face couplings. Due to the secial sealing it is possible to couple against trapped pressure on the male halves (max. 4x100 bar/ 5802 PSI) The main features of the multi coupling are: · Safety against commutability of hydraulic lines · Quick connecting · Coupling against trapped pressure · Optimally minimized leakage during coupling process Working Pressure 250 bar / 25 MPa / 3626 PSI Material Steel Surface Finishing Zinc-Nickel Standard Seal Material(s) NBR (Buna-N®), PTFE, PU

Material Carbon Steel Surface Finishing Zinc-Plating and Thick-Film-Passivation (Chrome III) Standard Seal Material(s) Special compound Working Temperature -35° C ... +130° C / -31° F ... +266° F Valve Design Flat Face Connection Push and actuate Push Sleeve Disconnection Actuate Push Sleeve Connect Under Pressure not allowed Application Rescue and Tensioning Hydraulics ISO Interchange -

Material Carbon Steel Surface Finishing Zinc-Nickel Standard Seal Material(s) NBR (Buna-N®), PTFE Working Temperature -25° C ... +100° C / -13° F ... +212° F Valve Design Flat Face Connection Push and actuate Push Sleeve Disconnection Actuate Push Sleeve Connect Under Pressure not allowed Application Agricultural and Forestry Machinery ISO Interchange ISO 5676

Material Stainless Steel V4A (AISI 316) Surface Finishing - Standard Seal Material(s) FKM (Viton®) Working Temperature -25° C ... +200° C / -13° F ... +392° F Valve Design Poppet Valve Connection Push and actuate Push Sleeve Disconnection Actuate Push Sleeve Connect Under Pressure not allowed Application Industrial Hydraulic ISO Interchange ISO 7241-1, Series B

Material Brass Surface Finishing - Standard Seal Material(s) FKM (Viton®) Working Temperature -25° C ... +200° C / -13° F ... +392° F Valve Design Poppet Valve Connection Push and actuate Push Sleeve Disconnection Actuate Push Sleeve Connect Under Pressure not allowed Application Industrial Hydraulic ISO Interchange ISO 7241-1, Series B

Material Carbon Steel Surface Finishing Zinc-Nickel Standard Seal Material(s) NBR (Buna-N®) Working Temperature -25° C ... +100° C / -13° F ... +212° F Valve Design Poppet Valve Connection Push and actuate Push Sleeve Disconnection Actuate Push Sleeve Connect Under Pressure not allowed Application Industrial Hydraulic ISO Interchange ISO 7241-1, Series B

Material Stainless Steel V4A (AISI 316) Surface Finishing - Standard Seal Material(s) FKM (Viton®) Working Temperature -25° C ... +200° C / -13° F ... +392° F Valve Design Poppet Valve Connection Push and actuate Push Sleeve Disconnection Actuate Push Sleeve Connect Under Pressure not allowed Application Agricultural and Forestry Machinery, Industrial Hydraulic ISO Interchange ISO 7241-1, Series A

Material Carbon Steel Surface Finishing Zinc-Nickel Standard Seal Material(s) NBR (Buna-N®) Working Temperature -25° C ... +100° C / -13° F ... +212° F Valve Design Poppet Valve Connection Push and actuate Push Sleeve Disconnection Actuate Push Sleeve Connect Under Pressure not allowed Application Agricultural and Forestry Machinery ISO Interchange ISO 7241-1, Series A

Material Carbon Steel Surface Finishing Zinc-Plating and Thick-Film-Passivation (Chrome III) Standard Seal Material(s) NBR (Buna-N®), PTFE Working Temperature -30° C ... +100° C / -22° F ... +212° F Valve Design Poppet Valve Connection Push Disconnection Pull Connect Under Pressure not allowed Application Agricultural and Forestry Machinery ISO Interchange ISO 7241-1 Series A, Size 12,5

Material Carbon Steel Surface Finishing Zinc-Nickel, Zinc-Plating and Thick-Film-Passivation (Chrome III) Standard Seal Material(s) NBR (Buna-N®), PTFE Working Temperature -25° C ... +100° C / -13° F ... +212° F Valve Design Poppet Valve Connection Push (When mounting the Sleeve in Bulkhead), Push and actuate Push-Pull Sleeve Disconnection Pull (When mounting the Sleeve in Bulkhead), Actuate Push-Pull Sleeve Connect Under Pressure Male Tip Series HU up to the max. Working Pressure allowed Application Agricultural and Forestry Machinery ISO Interchange ISO 7241-1 A and ISO 5675 (for selected sizes)

Material Carbon Steel Surface Finishing Zinc-Nickel, Zinc-Plating and Thick-Film-Passivation (Chrome III) Standard Seal Material(s) NBR (Buna-N®), PTFE Working Temperature -25° C ... +100° C / -13° F ... +212° F Valve Design Poppet Valve Connection Push (When mounting the Sleeve in Bulkhead), Push and actuate Push-Pull Sleeve Disconnection Pull (When mounting the Sleeve in Bulkhead), Actuate Push-Pull Sleeve Connect Under Pressure not allowed (Male Tip Series HU up to the max. Working Pressure allowed) Application Agricultural and Forestry Machinery ISO Interchange ISO 7241-1 A and ISO 5675 (for selected sizes)