Quick couplings - Import export

We supply IBK folding clamp couplings in brass, stainless steel, aluminium and PP. Our couplings have proved their worth under hard conditions in steel works and are regarded as standard. Material: - Couplings made of brass - Seals made of NBR (optionally of EPDM or Viton) - Clamp made of stainless steel Attribute: - Vacuum sealed for suction lines - No danger of icing - Interchangeable with systems of the same kind (MIL C-27450) - Suitable for closing male and female parts Temperature: - Working temperature from – 40°C to + 120°C, for higher temperature inquire suitable seal Pressure: - Max. 16 Bar working pressure –> Safety Factor 4 - Vacuum – 0,8 Bar Benefits of these couplings 1. perfect flow 2. No eddies form in the flow 3. the nozzles cannot fall out 4. the shells cannot slide about. 5. Precise fl ow control, impact-resistant, nonrusting 6. firm fit Special models on request! The dimensions stated are approximations. Subject to technical alterations

Quick click-shut coupling (QuickLock) without threads, no lubrication or elaborate screwing required Fast rod insertion and removal Approximately 40 % quicker installation than screwed rods Absolute stable connection Works around offset pipe bends and joints Minimal deformations Made from one piece of steel Rigid, low wear, as no clamping jaws required No slipping back of the bursting rods due to elastic pulling forces Bursting rod system with practical bursting rod accessories

WATER SEPARATOR WA 4I MULTIQUBEWater separator WA 4i for combination with MultiQube insulation layer dryers The new WA 4i is provided with an integrated micro filter system with low-maintenance magnetic lock filter compartment to take in micro filter cartridges with a threefold filter element. This makes the WA 4i a versatile integral solution with all pre-HEPA filter stages in only one device. Advantage: improved flow-optimized filter technology, quicker setup, decreased material and space requirements – no separate additional micro filter housings required. With respect to insulation drying of surfaces sized up to 40 m², no other model is quite fit to hold a candle to this separator, for despite its ultra-compact dimensions the WA 4i comes fully equipped with numerous practice-oriented detailed solutions, such as a construction yet easier to maintain, TTKwic quick couplings, cable holder, residual water drainage and much more.

Material Carbon Steel Surface Finishing Zinc-Plating and Thick-Film-Passivation (Chrome III) Standard Seal Material(s) NBR (Buna-N®) Working Temperature -25° C ... +100° C / -13° F ... +212° F Valve Design Poppet Valve Connection Screw Disconnection Screw Connect Under Pressure Male Tip and Female Body up to max. 100 bar / 1450 PSI allowed Application Industrial Hydraulic ISO Interchange -

Material Brass and Carbon Steel Surface Finishing Carbon Steel: Zinc-Plating and Thick-Film-Passivation (Chrome III) Standard Seal Material(s) NBR (Buna-N®) Working Temperature -25° C ... +100° C / -13° F ... +212° F Valve Design Flat Valve Connection Screw Disconnection Screw Connect Under Pressure not allowed Application Industrial Hydraulic ISO Interchange -

Material Carbon Steel Surface Finishing Zinc-Nickel Standard Seal Material(s) NBR (Buna-N®) Working Temperature -25° C ... +100° C / -13° F ... +212° F Valve Design Poppet Valve Connection Screw Disconnection Screw Connect Under Pressure not allowed Application Industrial Hydraulic ISO Interchange -

Material Carbon Steel Surface Finishing Zinc-Nickel Standard Seal Material(s) NBR (Buna-N®), PU Working Temperature -25° C ... +100° C / -13° F ... +212° F Valve Design Ball Valve Connection Screw Disconnection Screw Connect Under Pressure not allowed Application Industrial Hydraulic, Rescue and Tensioning Hydraulics ISO Interchange ISO 14540

Material Stainless Steel V4A (AISI 316) Surface Finishing - Standard Seal Material(s) FKM (Viton®) Working Temperature -25° C ... +200° C / -13° F ... +392° F Valve Design Poppet Valve Connection Screw Disconnection Screw Connect Under Pressure Male Tip and Female Body allowed Application Industrial Hydraulic, Offshore, Rescue and Tensioning Hydraulics ISO Interchange -

Material Carbon Steel Surface Finishing Zinc-Nickel Standard Seal Material(s) NBR (Buna-N®) Working Temperature -25° C ... +100° C / -13° F ... +212° F Valve Design Poppet Valve Connection Screw Disconnection Screw Connect Under Pressure Male Tip and Female Body allowed Application Industrial Hydraulic, Rescue and Tensioning Hydraulics ISO Interchange -

Material Carbon Steel Surface Finishing Zinc-Plating and Thick-Film-Passivation (Chrome III) Standard Seal Material(s) NBR (Buna-N®) Working Temperature -25° C ... +100° C / -13° F ... +212° F Valve Design Poppet Valve Connection Screw Disconnection Screw Connect Under Pressure Male Tip and Female Body up to max. 100 bar / 1450 PSI allowed Application Construction Machinery ISO Interchange -

Material Carbon Steel Surface Finishing Zinc-Nickel Standard Seal Material(s) NBR (Buna-N®), PTFE Working Temperature -25° C ... +100° C / -13° F ... +212° F Valve Design Flat Face Connection Screw Disconnection Screw Connect Under Pressure Male Tip up to the max. Working Pressure allowed Application Construction Machinery, Industrial Hydraulic ISO Interchange -

Material Carbon Steel Surface Finishing Zinc-Nickel Standard Seal Material(s) NBR (Buna-N®), PTFE Working Temperature -20° C ... +100° C / -4° F ... +212° F Valve Design Flat Valve Connection Screw Disconnection Screw Connect Under Pressure not allowed Application Construction Machinery ISO Interchange -

Material Carbon Steel Surface Finishing Zinc-Nickel Standard Seal Material(s) HNBR, FKM (Viton®), PTFE Working Temperature -20° C ... +100° C / -4° F ... +212° F Valve Design Poppet Valve Connection Screw Disconnection Screw Connect Under Pressure not allowed Application Construction Machinery ISO Interchange -

Material Stainless Steel V4A (AISI 316) Surface Finishing - Standard Seal Material(s) FKM (Viton®) Working Temperature -25° C ... +200° C / -13° F ... +392° F Valve Design Poppet Valve Connection Screw Disconnection Screw Connect Under Pressure Male Tip/Female Body up to 33% of the Working Pressure with Tools Application Agricultural and Forestry Machinery, Construction Machinery, Industrial Hydraulic ISO Interchange ISO 14541 (BG 1-6)

Material Carbon Steel Surface Finishing Zinc-Plating and Thick-Film-Passivation (Chrome III) Standard Seal Material(s) NBR (Buna-N®) Working Temperature -25° C ... +100° C / -13° F ... +212° F Valve Design Poppet Valve Connection Screw Disconnection Screw Connect Under Pressure Male Tip/Female Body up to 33% of the Working Pressure with Tools Application Construction Machinery ISO Interchange ISO 14541 (BG 1-6)

Description The multi-coupling has been created for connecting and disconnecting several hydraulic lines at the same time. This is done by an operating lever the guide crank of which is designed for a minimum of operating force. The connection of the hydraulic lines is done with flat face couplings. Due to the secial sealing it is possible to couple against trapped pressure on the male halves (max. 4x100 bar/ 5802 PSI) The main features of the multi coupling are: · Safety against commutability of hydraulic lines · Quick connecting · Coupling against trapped pressure · Optimally minimized leakage during coupling process Working Pressure 250 bar / 25 MPa / 3626 PSI Material Steel Surface Finishing Zinc-Nickel Standard Seal Material(s) NBR (Buna-N®), PTFE, PU

Material Carbon Steel Surface Finishing Zinc-Nickel Standard Seal Material(s) NBR (Buna-N®) Working Temperature -40° C ... +106° C / -40° F ... +223° F Valve Design Poppet Valve Connection Push Disconnection Actuate Push Sleeve Connect Under Pressure Male Tip/Female Body Application Construction Machinery, Industrial Hydraulic ISO Interchange -

Material Carbon Steel Surface Finishing Zinc-Plating and Thick-Film-Passivation (Chrome III) Standard Seal Material(s) Special compound Working Temperature -35° C ... +130° C / -31° F ... +266° F Valve Design Flat Face Connection Push and actuate Push Sleeve Disconnection Actuate Push Sleeve Connect Under Pressure not allowed Application Rescue and Tensioning Hydraulics ISO Interchange -

Material Carbon Steel Surface Finishing Zinc-Nickel Standard Seal Material(s) NBR (Buna-N®), PTFE Working Temperature -25° C ... +100° C / -13° F ... +212° F Valve Design Flat Face Connection Push and actuate Push Sleeve Disconnection Actuate Push Sleeve Connect Under Pressure not allowed Application Agricultural and Forestry Machinery ISO Interchange ISO 5676

Material Carbon Steel Surface Finishing Zinc-Nickel Standard Seal Material(s) NBR (Buna-N®) Working Temperature -25° C ... +100° C / -13° F ... +212° F Valve Design Poppet Valve Connection Push and actuate Push Sleeve Disconnection Actuate Push Sleeve Connect Under Pressure not allowed Application Industrial Hydraulic ISO Interchange -

Material Stainless Steel V4A (AISI 316) Surface Finishing - Standard Seal Material(s) FKM (Viton®) Working Temperature -25° C ... +200° C / -13° F ... +392° F Valve Design Poppet Valve Connection Push and actuate Push Sleeve Disconnection Actuate Push Sleeve Connect Under Pressure not allowed Application Industrial Hydraulic ISO Interchange ISO 7241-1, Series B

Material Brass Surface Finishing - Standard Seal Material(s) FKM (Viton®) Working Temperature -25° C ... +200° C / -13° F ... +392° F Valve Design Poppet Valve Connection Push and actuate Push Sleeve Disconnection Actuate Push Sleeve Connect Under Pressure not allowed Application Industrial Hydraulic ISO Interchange ISO 7241-1, Series B

Material Carbon Steel Surface Finishing Zinc-Nickel Standard Seal Material(s) NBR (Buna-N®) Working Temperature -25° C ... +100° C / -13° F ... +212° F Valve Design Poppet Valve Connection Push and actuate Push Sleeve Disconnection Actuate Push Sleeve Connect Under Pressure not allowed Application Industrial Hydraulic ISO Interchange ISO 7241-1, Series B

Material Stainless Steel V4A (AISI 316) Surface Finishing - Standard Seal Material(s) FKM (Viton®) Working Temperature -25° C ... +200° C / -13° F ... +392° F Valve Design Poppet Valve Connection Push and actuate Push Sleeve Disconnection Actuate Push Sleeve Connect Under Pressure not allowed Application Agricultural and Forestry Machinery, Industrial Hydraulic ISO Interchange ISO 7241-1, Series A

Material Carbon Steel Surface Finishing Zinc-Nickel Standard Seal Material(s) NBR (Buna-N®) Working Temperature -25° C ... +100° C / -13° F ... +212° F Valve Design Poppet Valve Connection Push and actuate Push Sleeve Disconnection Actuate Push Sleeve Connect Under Pressure not allowed Application Agricultural and Forestry Machinery ISO Interchange ISO 7241-1, Series A

Material Carbon Steel Surface Finishing Zinc-Plating and Thick-Film-Passivation (Chrome III) Standard Seal Material(s) NBR (Buna-N®), PTFE Working Temperature -30° C ... +100° C / -22° F ... +212° F Valve Design Poppet Valve Connection Push Disconnection Pull Connect Under Pressure not allowed Application Agricultural and Forestry Machinery ISO Interchange ISO 7241-1 Series A, Size 12,5

Material Carbon Steel Surface Finishing Zinc-Nickel, Zinc-Plating and Thick-Film-Passivation (Chrome III) Standard Seal Material(s) NBR (Buna-N®), PTFE Working Temperature -25° C ... +100° C / -13° F ... +212° F Valve Design Poppet Valve Connection Push (When mounting the Sleeve in Bulkhead), Push and actuate Push-Pull Sleeve Disconnection Pull (When mounting the Sleeve in Bulkhead), Actuate Push-Pull Sleeve Connect Under Pressure Male Tip Series HU up to the max. Working Pressure allowed Application Agricultural and Forestry Machinery ISO Interchange ISO 7241-1 A and ISO 5675 (for selected sizes)

Material Carbon Steel Surface Finishing Zinc-Nickel, Zinc-Plating and Thick-Film-Passivation (Chrome III) Standard Seal Material(s) NBR (Buna-N®), PTFE Working Temperature -25° C ... +100° C / -13° F ... +212° F Valve Design Poppet Valve Connection Push (When mounting the Sleeve in Bulkhead), Push and actuate Push-Pull Sleeve Disconnection Pull (When mounting the Sleeve in Bulkhead), Actuate Push-Pull Sleeve Connect Under Pressure not allowed (Male Tip Series HU up to the max. Working Pressure allowed) Application Agricultural and Forestry Machinery ISO Interchange ISO 7241-1 A and ISO 5675 (for selected sizes)

Material Stainless Steel V4A (AISI 316) Surface Finishing - Standard Seal Material(s) FKM (Viton®) Working Temperature -25° C ... +200° C / -13° F ... +392° F Valve Design Flat Face Connection Push Disconnection Actuate Push Sleeve Connect Under Pressure not allowed Application Offshore ISO Interchange -