Pumping systems - Import export

Filltech's most advanced pumping technology: High-end CO 2/N 2O pump designed for automatic redundancy and fail-over Highlights Intelligent interoperability with any Filltech filling station Optimized energy consumption Complete plug & Play system ready for instant connection Safe operation through intelligent monitoring: pressure, temperature, leakage Low noise emission Application ready: filling, dozing, transfer, supply Joint pumps for flow-rates up to 6 tons Remote operations: Monitoring, remote control, power control Technical Data Capacity: 400 - 1500 kg/h, 6-25 lpm, 1.7 -6.6 gpm Power supply: 3 x 400V / 50 Hz, opt 120 / 208V, opt. 277 / 480V/60Hz, 3-phase Power consumption: 1.5 to + 4 kW/h (dep. on pump size) Dimensions (LxWxH): 900 x 900 x 1670 mm / 35 x 35 x 66 in. Pump Triplex plunger pump NP 25/50 – 25/70 Motor: Belt drive Construction characteristics CO 2 supply: liquid from tank system Ring- or stub lines Automatic start cycle Pressure supply needed for valve: 8 b

Our experience in filling cylinders has enabled us to develop our own pump technology which has proved its worth in a number of fields in addition to filling cylinders. Pump aggregate NP 10/15 Performance Min./Max.: 150-300 kg/h 0.6-1.2 gal/min Power cons.: 1,5 kW Motor: 3x400 V, 50/60 Hz Drive: V-Belt Dimensions (LxWxH): 600x400x500mm Weight: 40 kg Pump aggregate NP 25/50 Performance Min./Max.: 400-1000 kg/h Power cons.: 3,0 kW Motor: 3x400 V, 50/60 Hz Drive: V-Belt Dimensions (LxWxH): 800x600x500mm Weight: 85 kg Pump aggregate NP 25/70 Performance Min./Max.: 600-1500 kg/h Power cons.: 4,0 KW Motor: 3x400 V, 50/60 Hz Drive: V-Belt Dimensions (LxWxH):800x600x500mm Weight: 85 kg The following stats are valid for all pumps: Materials Valve casing: Special brass / cast bronze Valves: High grade stainless steel Plunger: Ceramic Sleeves: CO 2/N 2O – resistant compound; fabric reinforced Support rings: Teflon with graphite, run-dry-proof Crankshaft: Drop-forged and case hardened Pump

Merecs develops individual test systems for heat pumps, gas, fluid and water systems. Our engineers & fitters for electronics, installation technology and mechanics build the systems completely from one source at our location in Steinfurt. The systems are then delivered and commissioned at home and abroad. Our range of products includes - Development test benches - Life time test benches - End-of-line test benches (production) - Retrofit of existing systems (software / hardware) - Climate & temperature test systems - Leakage test benches - Software development LabVIEW, TestStand, Python, C/C++ (Embedded), Microsoft PowerBI, SQL - Electronics development - Mechanical 3D CAD design

Quick and uncomplicated hand disinfection for maximum protection. Be it in kitchens, laboratories or public buildings – the cartridge-free pump system with the elbow-operated dispenser ensures optimum hygiene conditions.

TOPAZ differential valves are the ideal valve for water tanks in pressurised systems. The float valve with diaphragm offers a high flow rate of up to 200 l/min. Furthermore, an adjustable level control from 50 mm up to 2500 mm is possible. This minimises the number of start-stop operations of the pump system and ensures minimal pump operation.

This insert frame is fitted with adhesive tape on the underside making it perfect for attaching to petrol pumps, shelving systems or similar. The frame profile is compatible with various clips and holders can so can be adapted easily to become an offer or information sign.

Preformed silicone heaters are useful for diamters as small as 12 mm and up to 100 mm. Rounded silicone heaters are not possible with self-adhesive foil. Spiral Wrap Pre-Formed Silicone Rubber Heaters are suitable for tubes and flexible pipes and hoses with Ø 6,35 mm (1/4"). Spiral formed flex heaters can be used up to Ø 12 mm (the length of the stretchable silicone spiral wrap heater is reduced accordingly). The thickness of our spiral-wrapped silicone strip heaters is 2,2 mm. Also our gas and pump line heaters, most frequently used in the semi-conductor process, are shaped and pre-formed according to the object geometry to be heated. They are designed to regulate temperatures in order to prevent condensation in the line. Current applications here are Semi Conductors, Vacuum Chambers, Wafer Chucks, Valves, Exhaust & Pump Systems.

The Geck disinfection system Aguarico is an optional mobile display to enable mobile disinfection use and to protect you and your customers or employees in highly frequented locations. Our product portfolio includes disinfection systems with pump dispensers for manual operation and SensorTouchcontrolled systems that can be operated without contact. Both systems are currently available, we look forward to your inquiry. Contact us at any time via gesundheit@geck.de or visit our website https//www.geck.de/en/healthpreventionsystems.

AUTOSOL® CLEANER FOR DRILLING AND CUTTING OILS Special cleaner for cleaning metal surfaces after processing with drilling and cutting agents. Used corrosion inhibitors offer best material compatibility. Depending on pump pressure and system, the cleaner is sprayable for drilling and cutting oils from 50°C.

Chain Magnetic Separator are used for the cleaning of liquids contaminated with magnetizable solid particles and foreign oils. F.E.S. separator systems can be used in full-flow or bypass cleaning applications. The separation performance varies depending on the level of contamination and the volume flow rate. Note: The separator systems can be supplied via a separate supply pump, existing system pumps (with sufficient reserve capacity within the existing system components), or a free inlet (with sufficient geodetic height difference). Advantages: No filter aids required High separation efficiency Large throughput capacity Large active separation surface due to favorable separation geometry and optimal arrangement of magnets Low wear and tear Operating Principle: The contaminated liquid is supplied to the separator through the flange (1) located at the bottom.

Automatic Precoat Filter are used for the cleaning of contaminated cutting fluids in metal processing and rolling mill applications. Clean cutting fluids lead to longer tool life, improved surface quality of workpieces or rolled goods, and efficient heat dissipation at the processing or forming point. Advantages: Fully automatic operation Excellent filtration results Compact size Low maintenance requirements Full-flow filtration Dry cake discharge with minimal carryover of cutting fluid No fleece consumption Maximum lifespan of cutting fluid Operating Principle: The cleaned cutting fluid is supplied to the filter system pump (1) from the clean tank (2) of the processing machine. The contaminated cutting fluid is introduced into the dirt tank (3) of the cake filtration system through inlet channels or lifting stations. The internal processing of the system consists of four steps: “Cake Formation,” “Filtration,” “Regeneration,” and “Sludge Treatment.”

Free Flow-Immersion Pumps series SFT are designed to lift coolant for filtering. Coarse shreds can be transported together with liquids. The SFT serie offers a flange with pressure gauge connection port. The flange can be rotated for either horizontal or vertical pipe connections. Impellers: semi-open Fluids: coolants, emulsions, oils Volumetric delivery: up to 2350 l/min Delivery head: up to 28 m Examples of applications: — Water based coolant and chips — Pump back system — Pump back for various chip materials Please contact us for delivery quantity

Free Flow-Immersion Pumps series FT/FTA are provided to lift coolant for filtering. Middle shreds can be transported together with liquids. Impellers: semi-open Fluids: coolants, emulsions, oils Volumetric delivery: up to 200 l/min Delivery head: up to 6,5 m Examples of applications: — Water based coolant and chips — Pump back system — Pump back for various chip materials Please contact us for delivery quantity

A complete centralised cooling plant, including the required peripherals, can be set up in the absolute shortest possible time at the subsequent place of installation and is immediately ready for use by means of prefabrication and installation in a container. This way, the otherwise high investments for an operating building, the costs for installation and start-up of the plant are reduced. Container cooling plants almost have no limitations in terms of their capacity and variety of possible combinations. They are supplemented by peripheral systems such as water treatment and water preparation systems or compressed air compressors. A series of different cooling systems and the combined systems composed of these units are primarily available: Chiller Heat pump systems for heat recovery Cooling tower combined with a KU system as a closed, clean cooling circuit Air heaters for direct recovery of heat hermeticool-units hermeticool hybrid-units

The EFS 12 enables complex control tasks, MES/ERP connections and remote maintenance. Thanks to its modular design, it can be expanded into a fully automatic filling line at any time, including automatic container conveying, capping and labelling. It is suitable for viscous to pasty liquids such as paints and varnishes and offers automatic container transport options as well as an electronic scale. The station supports coarse/fine over-level filling and can be connected directly to storage tanks via inclines or pumps. The system offers you: ■ a calibratable oversize filling system ■ quick cleaning of the valve (the area in contact with the product consists of 3 parts) ■ quick changeover to other container dimensions and changing products ■ Filling, capping and palletising by one person ■ Can be used immediately: just connect the power supply (electricity and/or compressed air) and product supply and filling can begin

Industrial parts cleaning with the Perkute Toploader Series The PERKUTE rotating basket cleaning machine from the Toploader series is used wherever effective and inexpensive cleaning of parts of any kind is necessary. The rotating basket, designed for large weights, is powered by means of a low-wear friction wheel drive and the aqueous cleaning in the spray process takes place by means of a nozzle pipe system with special flat-spray nozzles that is arranged on 3 sides. A powerful washing pump supplies the system with the necessary pressure and volume flow. The parts cleaning machines, made completely of non-rusting special steel, istinguish themselves by their compact and robust construction as well as simple handling. They are mobile to deploy and designed to be space-saving. Customisation for individual cleaning tasks can be optimised through a comprehensive range of accessories.

The patented one shaft crusher with automatic ejector of large parts. Especially suitable for use in machine pump back systems for chips and coolants. Compact and robust design with the Mayfran high quality features. Maximum security for the user, since no manual intervention is necessary. Large parts can no longer block the crusher and interrupt the operation.

The function of the flow sensor is based on the calorimetric principle. The probe is heated up from the inside a few degrees Celsius in relation to the flow medium, in which it protrudes. When the medium flows, the heat generated in the probe is dissipated through the medium. The temperature within the sensor is measured and compared with the likewise measured medium temperature. From the obtained temperature difference the flow state of each medium can be derived. These sensors are applied in areas such as monitoring of cooling systems, ventilation systems, pump dry running by checking the presence of liquid or gas flows.