Power-tools - Import export

Special tools: The greatest possible flexibility for individual custom-made products is a matter of course for us. According to your sketch, demand-oriented solutions are created that are precisely tailored to your requirements.

ENGRAVING TOOLS For engraving plastics and non-ferrous metals. The width must be ground by you, to suit your requirements.Engraving cutter and engraving stylus: For engraving plastics and non-ferrous metals. The ""typeface width"" must be sanded down in-house. Engraving cutter 60 °, point angle 60 °, number of teeth 1, spiral angle 30 ° r."

Hard reamers 58 to 65 HRC, 1/100 rising, right-hand cutting, straight groove.

The question of the ideal milling cutter is dependent upon the material to be machined. A single-tooth cutter is often an advantage for ""soft"" materials (PVC, Perspex, Kömacel, etc), wooden materials (chip- or flakeboard) and non-ferrous metals (soft aluminium, Alcubond, etc.), as the problem of cutting erosion in comparison to clogging recedes. A double flute is better suited to very hard plastics and harder types of aluminium (short chipping). Milling cutters with 4 or more flutes are predominantly used to mill metals. SINGLE-TOOTH MILLING CUTTERS Single-tooth milling cutters are mainly used for machining ""soft"" materials. Their extra large chipping space guarantees an ideal chipping removal and high stock removal rate. MULTI-TOOTH MILLING CUTTERS Multi-tooth milling cutters are used for machining ""harder"" materials. Smoother running is achieved, as several cutting edges are always in contact. The more flutes the tool has, the smaller the individual chippings will be.

DE-BURRERS Specially developed for processing contours on CNC machines. To de-burr and chamfer metals and plastics. The de-burrers are also suitable for hard machining. Deburrer for contouring. Designed for use on CNC machines, especially for contour machining. For deburring and chamfering of metals and plastics. The de-burrers are also suitable for hard machining. Stocked by default is a point angle of 90 °. 4 - 6 mm de-burrer with 4 cutting edges, from 8 mm with 5 cutting edges.

In form, double strength. For the optimum processing of your individual requirements we simply combine our transfluid forming techniques, as simple as that, in particular the axial forming and the rollforming. The additional clamping unit makes even extreme forming feasible in one work sequence. The cutting before the axial tube forming is also possible, as well as the rollforming of a preformed geometry. That saves you valuable time. A strong partnership axial forming and rollforming. Our t form combination machines is the perfect union of axial and rolling tube processing, with up to 6 axial forming steps, two rollforming stations, two powered tool holders for flange orientation and an additional clamping unit. The horizontal clamping system makes the processing of bent tube geometries possible.

• Smooth inside jaws for bending fine loops • Tight-fit joint movement • With box-joint and opening spring • Handles with ergonomically shaped ESD multi-component sleeves, electrically conductive • Made of tool steel, forged, oil-hardened

• For slotted screws • The ergonomic multi-component design with integrated soft zones and pronounced quick driving area makes it possible to work quickly without getting tired thanks to the optimum and hand-friendly power transmission • Blades hardened and chrome-plated with black tip • Blades made of molybdenum vanadium steel

• Containing pressing pliers and the most popular non-insulated end-sleeves • For establishing solderless, electrical connections according to DIN • Handle strip pushed in flush • Sortimo L-BOXX Mini, plastic system case made of shock and impact proof ABS-plastic for more mobility

• For cutting wire ropes and steel wire without any burr or splaying • For wire ropes 1570 N/mm² • Cutting edges inductively hardened • With optimum leverage for easy and effortless work • Handles made of precision steel tube • Insulation according to DIN EN/IEC 60900

• For allen keys • The ergonomic multi-component punch handle with rotating cap and soft fine precision zone makes it possible to transfer the smallest torques • Blades hardened and chrome-plated with black tip • Blades made of chrome vanadium steel

— For Pozidriv cross-recess screws — Ergonomic multi-component hole handle with integrated soft zones and distinctive fast-turning zone enables optimum, hand-friendly power transmission and fast, low-fatigue working — The handle core made of impact-resistant hard plastic is coated with various soft components and embedded highly flexible pads that adapt optimally to the hand and ensure maximum power transmission. — The flexibility of the material and the pleasant feel of the fast-turning zone additionally increase sensitivity and support the precise application of force. — Bit holder for driving with e.g. a ratchet or cordless screwdriver — Insulation according to DIN EN/IEC 60900 — SlimLine with reduced blade diameter and integrated protective insulation, for low-lying screw and spring elements

• Most popular shape for assembly work, trimming printed circuit boards, also for radio and telephone work • For gripping small parts and forming wires • Tips bent 45°, smooth inside jaws, edges rounded • Tight-fit joint movement • With box-joint and opening spring • Handles with ergonomically shaped ESD multi-component sleeves, electrically conductive • Made of tool steel, forged, oil-hardened

• Containing quality tools, insulated and tested according to DIN EN/IEC 60900 • The ergonomic multi-component design with integrated soft zone and pronounced quick driving area makes it possible to work quickly without getting tired thanks to the optimum and hand-friendly power transmission • Sortimo I-BOXX, plastic system case made of shock and impact proof ABS-plastic with lockable transparent cover • Insulation according to DIN EN/IEC 60900 • Blades hardened and black with injected insulation • Blades made of molybdenum vanadium steel / chrome vanadium steel

• Containing quality tools, insulated and tested according to DIN EN/IEC 60900 • Handles with 1000V multi-layered insulation according to DIN EN/IEC 60900 • Sortimo I-BOXX, plastic system case made of shock and impact proof ABS-plastic with lockable transparent cover

• In practical tool holder for easy removal and storage of the key • For Torx screws • Nickel-plated • Made of vanadium-molybdenum steel

• Containing quality tools, partially insulated and tested according to DIN EN/IEC 60900 • Tool bag made of durable cowhide with circumferential aluminium edge protection

• Strong design • With long flat jaws • Serrated inside jaws • With lap-joint and strong handles • Handles coated with plastic • Made of tool steel, forged, oil-hardened

• American pattern • For holding, gripping, bending and cutting work • For cutting hard and soft wires • For shortening screws M 3.5 • Cutting edges inductively hardened • With Nail- & wire holder • Gripping zones for flat and round materials • Asymmetric inside jaws for better grip on the workpiece • Integrated ring spanner • Power transmission with optimum leverage for easy and effortless work • Handles with ergonomically shaped SoftGripp multi-component safety sleeves according to DIN EN/IEC 60900 • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of tool steel, forged, oil-hardened

• Containing quality tools • The ergonomic multi-component design with integrated soft zone and pronounced quick driving area makes it possible to work quickly without getting tired thanks to the optimum and hand-friendly power transmission • Insulation according to DIN EN/IEC 60900 • In practical sales packaging • Blades hardened and black with injected insulation • Blades made of molybdenum vanadium steel / chrome vanadium steel

• For fitting snap rings and retainer rings without finger holes for shaft retainers of any description • With opening spring • Made of tool steel, forged, oil-hardened

• For fitting internal circlips in holes • With straight jaws • With exchangeable tips made of special steel • Anti-slip, twisted precision tips • With retainer • Handles made of solid rolled steel

• With protection cap • Blade with narrow, straight blade for fine cable work • With fixed blade • Ergonomically designed multi-component safety handle made of tough elastic, impact-resistant plastic with integrated soft zone • Insulation according to DIN EN/IEC 60900 • Blade made of stainless steel, hardened

• For gripping and bending • With long round jaws • Serrated inside jaws • Handles with 1000V multi-layered insulation according to DIN EN/IEC 60900 • Made of tool steel, forged, oil-hardened

• Universal key for almost all common switch cabinets & closures • Key profile for these applications: electrical engineering, heating and sanitary installations, air-conditioning and ventilation, industry, building technology, e.g. switch cabinets, mains switchboards, locking systems, technical installations, for venting heating systems and many more • Universal 1/4" bit holder for standard bits, with permanent magnet to hold bit in place • With bottle-opener • Made of zinc casting (GD-Zn)

• Cutting edges inductively hardened • Precision cutting edge for piano wire (D2 quality) • Power transmission with optimum leverage for easy and effortless work • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of special tool steel, forged, oil-hardened

• The indestructible water pump pliers, with safety box joint for highest stress • Double-toothed jaws • Cogs additionally induction hardened • Optimum jaw geometry with self-locking serration • Gripping capacity 40% above ISO by means of arch-shaped pitch adjustment • Ideal fulcrum, minimum effort • Finger trap protection for safe work, prevents injuries caused by squeezing • Box joint with wide guide surfaces • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of chrome vanadium steel, forged, oil-hardened

• Containing quality tools • The ergonomic multi-component design with integrated soft zone and pronounced quick driving area makes it possible to work quickly without getting tired thanks to the optimum and hand-friendly power transmission • Insulation according to DIN EN/IEC 60900 • In practical sales packaging • Blades hardened and black with injected insulation • Blades made of molybdenum vanadium steel / chrome vanadium steel

• For cutting hard and soft wires • Cutting edges inductively hardened • Precision cutting edge for the finest wires • Cutting edge hardness approx 62 HRC • Power transmission with optimum leverage for easy and effortless work • Handles with ergonomically shaped SoftGripp multi-component safety sleeves according to DIN EN/IEC 60900 • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of special tool steel, forged, oil-hardened