Power packs - Import export

This high pressure water jetting unit is extremely flexible due to its usage as a trailer. Three versions of the MK3 with operational pressure of up to 2500 – 3000 bar are available and is ideal for the removal of coating and concrete refurbishment, as well as for the separation and cutting of various materials. The easy to understand WOMATIC 4Control with operational status monitoring, pressurerpm regulation and pressureless circulation ensures high operational safety, low wear and tear, long service life, and last but not least, minimal fuel consumption.

The submerged waste water pump TWP 7025 E is a compact power pack mastering virtually every task brilliantly. With a power consumption of 750 W the high-suction pump transports up to 13,000 litres of contaminated water per hour. Due to this enormous conveying capacity of the TWP 7025 E, flooded basements and living spaces are quickly rendered accessible again, and pumping water out of building and waste water pits as well as withdrawing water from lakes, rivers and ponds can be done easily and without any problems. Even the water volumes of larger ponds or swimming pools can be circulated or disposed of quickly and easily. This power pack pumps water containing dirt particles sized up to 25 millimetres up to a pump height of 9 metres reliably and smoothly. This way it is able to transport water from a flooded basement to the next higher floor and thus out of the house.

with pneumatic pressing station for the xed design of palletizable packs for products with 2,200mm, hood opening 800x350mm, hood length 1,600mm, heating power 18KW, speed < 10 pack per mintue

T BEND SERVO-HYDRAULIC Stable, flexible and economical. Our DB 3A-CNC series will win you over with its special stability and performance. A real power pack of a machine For pipes with diameters from 1/4" to 12 3/4". Innovative Servo-Hydraulic System - Energy savings up to 70% by control of the hydraulic pump via a servo motor. On demand system only runs when hydraulic pressure is required; reducing the overall duty cycle and increasing lifecycle of all hydraulic components. The DB 3A-CNC mandrel bending machine performs tight radius bends with the highest quality. The machine meets all industry standards and exceeds customer expectations. The Software – Simple and intuitive manual input by machine operator with 3D graphical display. Import module allows easy import of step files from Tekla and other detailing systems.

T BEND SERVO-HYDRAULIC Stable, flexible and economical. Our DB 3A-CNC series will win you over with its special stability and performance. A real power pack of a machine For pipes with diameters from 1/4" to 12 3/4". Innovative Servo-Hydraulic System - Energy savings up to 70% by control of the hydraulic pump via a servo motor. On demand system only runs when hydraulic pressure is required; reducing the overall duty cycle and increasing lifecycle of all hydraulic components. The DB 3A-CNC mandrel bending machine performs tight radius bends with the highest quality. The machine meets all industry standards and exceeds customer expectations. The Software – Simple and intuitive manual input by machine operator with 3D graphical display. Import module allows easy import of step files from Tekla and other detailing systems.

T BEND SERVO-HYDRAULIC Stable, flexible and economical. Our DB 3A-CNC series will win you over with its special stability and performance. A real power pack of a machine For pipes with diameters from 1/4" to 12 3/4". Innovative Servo-Hydraulic System - Energy savings up to 70% by control of the hydraulic pump via a servo motor. On demand system only runs when hydraulic pressure is required; reducing the overall duty cycle and increasing lifecycle of all hydraulic components. The DB 3A-CNC mandrel bending machine performs tight radius bends with the highest quality. The machine meets all industry standards and exceeds customer expectations. The Software – Simple and intuitive manual input by machine operator with 3D graphical display. Import module allows easy import of step files from Tekla and other detailing systems.

T BEND SERVO-HYDRAULIC Stable, flexible and economical. Our DB 3A-CNC series will win you over with its special stability and performance. A real power pack of a machine For pipes with diameters from 1/4" to 12 3/4". Innovative Servo-Hydraulic System - Energy savings up to 70% by control of the hydraulic pump via a servo motor. On demand system only runs when hydraulic pressure is required; reducing the overall duty cycle and increasing lifecycle of all hydraulic components. The DB 3A-CNC mandrel bending machine performs tight radius bends with the highest quality. The machine meets all industry standards and exceeds customer expectations. The Software – Simple and intuitive manual input by machine operator with 3D graphical display. Import module allows easy import of step files from Tekla and other detailing systems.

COMMERCIAL DEHUMIDIFIER TTK 105 SThis robust lightweight makes a good impression even in rough surrounding conditions As to be expected from such a high-quality device of German manufacturing, the TTK 105 S impresses with a perfect combination of robust exterior and progressive interior. The hard-wearing power pack is provided with a stackable aluminium housing. This eases transport enormously – and handling, too: Instead of using unreferenced adjustment levels between minimum and maximum operation, with the TTK 105 S you can directly enter the desired humidity value via the digital display where the current temperature and humidity values of the room air can be read at all times. An integrated hygrostat implements the selected target fully automatically and adjusts the performance of compressor and two-staged fan.

TTK 125 S COMMERCIAL DEHUMIDIFIER"Nobody can offer as many litres at this weight" The TTK 125 S combines advanced detail solutions for powerful drying applications with a weight-optimized construction in a tried and tested German industrial design – protected prototype. The inner values are in no way inferior to the impressive enclosure: All electric components are specially enclosed to protect the electronic equipment from anything dangerous which may enter and impair the functionality and durability. Thus, the TTK 125 S is also perfectly suitable for drying in rough conditions. Good things come in small packages: Power pack TTK 125 S Due to its extremely low-maintenance design, the TTK 125 S is easy to clean and thanks to its low power to weight ratio and its clever mobility features, it is easy to transport. Nevertheless, in terms of dehumidification capacity, it is no lightweight:

T BEND SERVO-HYDRAULIC Stable, flexible and economical. Our DB 3A-CNC series will win you over with its special stability and performance. A real power pack of a machine For pipes with diameters from 1/4" to 12 3/4". Innovative Servo-Hydraulic System - Energy savings up to 70% by control of the hydraulic pump via a servo motor. On demand system only runs when hydraulic pressure is required; reducing the overall duty cycle and increasing lifecycle of all hydraulic components. The DB 3A-CNC mandrel bending machine performs tight radius bends with the highest quality. The machine meets all industry standards and exceeds customer expectations. The Software – Simple and intuitive manual input by machine operator with 3D graphical display. Import module allows easy import of step files from Tekla and other detailing systems.

T BEND SERVO-HYDRAULIC Stable, flexible and economical. Our DB 3A-CNC series will win you over with its special stability and performance. A real power pack of a machine For pipes with diameters from 1/4" to 12 3/4". Innovative Servo-Hydraulic System - Energy savings up to 70% by control of the hydraulic pump via a servo motor. On demand system only runs when hydraulic pressure is required; reducing the overall duty cycle and increasing lifecycle of all hydraulic components. The DB 3A-CNC mandrel bending machine performs tight radius bends with the highest quality. The machine meets all industry standards and exceeds customer expectations. The Software – Simple and intuitive manual input by machine operator with 3D graphical display. Import module allows easy import of step files from Tekla and other detailing systems.

T BEND SERVO-HYDRAULIC Stable, flexible and economical. Our DB 3A-CNC series will win you over with its special stability and performance. A real power pack of a machine For pipes with diameters from 1/4" to 12 3/4". Innovative Servo-Hydraulic System - Energy savings up to 70% by control of the hydraulic pump via a servo motor. On demand system only runs when hydraulic pressure is required; reducing the overall duty cycle and increasing lifecycle of all hydraulic components. The DB 3A-CNC mandrel bending machine performs tight radius bends with the highest quality. The machine meets all industry standards and exceeds customer expectations. The Software – Simple and intuitive manual input by machine operator with 3D graphical display. Import module allows easy import of step files from Tekla and other detailing systems.

T BEND SERVO-HYDRAULIC Stable, flexible and economical. Our DB 3A-CNC series will win you over with its special stability and performance. A real power pack of a machine For pipes with diameters from 1/4" to 12 3/4". Innovative Servo-Hydraulic System - Energy savings up to 70% by control of the hydraulic pump via a servo motor. On demand system only runs when hydraulic pressure is required; reducing the overall duty cycle and increasing lifecycle of all hydraulic components. The DB 3A-CNC mandrel bending machine performs tight radius bends with the highest quality. The machine meets all industry standards and exceeds customer expectations. The Software – Simple and intuitive manual input by machine operator with 3D graphical display. Import module allows easy import of step files from Tekla and other detailing systems.

T BEND SERVO-HYDRAULIC Stable, flexible and economical. Our DB 3A-CNC series will win you over with its special stability and performance. A real power pack of a machine For pipes with diameters from 1/4" to 12 3/4". Innovative Servo-Hydraulic System - Energy savings up to 70% by control of the hydraulic pump via a servo motor. On demand system only runs when hydraulic pressure is required; reducing the overall duty cycle and increasing lifecycle of all hydraulic components. The DB 3A-CNC mandrel bending machine performs tight radius bends with the highest quality. The machine meets all industry standards and exceeds customer expectations. The Software – Simple and intuitive manual input by machine operator with 3D graphical display. Import module allows easy import of step files from Tekla and other detailing systems.

ELECTRIC HEATER FAN TDS 755-10-15 – solid three stage heating power up to 15 kW A true power pack, the electric heater fan TDS 75 cuts a remarkably fine figure even with large-volume heating tasks. And not by chance, but exclusively made by Trotec. And since our distinctive logo has been printed on the outside, we have also incorporated convincing extras inside, which make all the difference to conventional standard electric heater fans. In addition to common equipment features such as a fan motor provided with thermal protection or a reliable overheating protection, the electric heater fan TDS 75 comes equipped with further practice-oriented features, e.g. an integrated air baffle, which optimally leads the warm air flow outside and initiates maximum efficiency, or trapezoidally mounted carrying handles, on which the electric heater fan can be stably stacked a number of times.

Latest information. Maysun Solar's new limited time winter sale is on! Several European warehouses now have stock in stock!!! Don't hesitate to contact us to enquire and join the pre-order and purchase queue!!! For a quicker response, send a message to maysunsolarmiddleeast@gmail.com Product details Supplier: Maysun Solar Product number: MS(495-520)MB-50H Power: 510W Packing: Pallet: 31 pieces Solar cell: monocrystalline silicon Cells: 100 cells cut in half Dimension: 2185 x 1098 x 35mm Weight: 26,5kg Glass: 3.2mm (0.13 inch), high transmission rate, AR coated and heat strengthened glass Encapsulation material: EVA Back: White Frame: 35mm (1.38 inch) anodised aluminium alloy Junction Box: IP68 rated Cable: PV technology cable 4.0 sq. mm (0.006 sq. in.) N 300 mm/P 300 mm (11.8/11.8 in.) length can be customised. Connector: MC4

Latest information. Maysun Solar's new limited time winter sale is on! Several European warehouses now have stock in stock!!! Don't hesitate to contact us to enquire and join the pre-order and purchase queue!!! For a quicker response, send a message to maysunsolarmiddleeast@gmail.com Product Details Product number: MS(440-460)MB-60H Power: 455W Packing: 37 pcs/pallet Solar cell: monocrystalline silicon Cells: 120 cells cut in half Dimension: 1910×1134×30mm weight: 24.2 kg Glass: 3.2mm (0.13 inch), high transmission rate glass, AR coated and heat strengthened glass Encapsulation material: EVA/POE Back: White Frame: 30mm (1.18 inch) anodised aluminium alloy Junction Box: IP68 rated (3 bypass diodes) Cable: PV technology cable 4.0 sq. mm (0.006 sq. in.) N 300 mm/P 300 mm (11.8/11.8 in.) length can be customised. Connector: Corresponds to model MC4 Pallet: 37 pcs