Plastic fittings - Import export

The 700 VA series float valve allows infinite adjustment of the level and has a flat float rod for mounting variable floats. It is suitable for use at high and low pressure and high temperatures up to 120°C, but not for use in drinking water. The stainless steel float model is suitable for simple mechanical regulation of levels in the food, pharmaceutical and chemical industries due to the VA materials and silicone seals.

These are the accessories mainly used in water sports accessories.

"very strong adhesion to the sub-material high resistance to UV rays toxicologically harmless with normal use Vibration-inhibiting when used in the machine area Millions of people hold plastic products in their hands every day without being aware of this fact. Regardless of whether they are used on sports equipment, medical equipment or work equipment: What is certain is that the pleasant haptic impression - the ""experience of access"" - is an important purchase criterion for the buyer, along with design and functionality. "

A.E.T. is one of the few German companies that co-extrude heat-shrink tubing. In addition to the required order information, all that is required is a production sample for precise dimensions. From prototype development to high-volume series production, A.E.T. offer all quantities. An A.E.T. customer advisor will be happy to answer any further questions with you in a telephone conversation.

Sheathing of e.g .: roof rack rails, impact protection for Kettcars, spring protection and much more.

• Face shield to protect against class 1 arcing faults (4 kA / 135 kJ/m²) • Tested in accordance with DIN EN166, as well as the GS-ET-29 test principle and is VDE-approved • The electrician´s face shield is made entirely of plastic • The flexible plastic profile fits on many helmets • The visor is manufactured from 1,5mm-thick Polycarbonate • It has excellent optical qualities, and its light transmittance VLT (D65) according to ISO 10527:2007 i ≥75% • The visor can be folded up and can be locked in place in any position by means of a screw connection • The electrician´s face shield is attached in a non-slip manner by means of a wide, adjustable elastic band

Telecommunication pipe – cable conduits made of PE-HD on drums or in coils Z.I.S. cable conduits made of PE-HD, manufactured acc. to DIN 16874 with external supervision by MPA, Darmstadt or DIN 16876 Standard design: Material: PE-HD according to DIN requirements Colour: black Inner surface: inside grooves, to reach max. pulling-in and blowing-in length Delivery type: on rental drums or in coils Labelling: to DIN requirements Possible designs: Material: PE80/PE100 acc. to DIN 8074/8075 Coloured: coextruded stripes Outer surface: coloured co-extruded or solid dyed Inner surface: smooth Type: composite pipes – side by side, parallel, loose wound on reel Delivery type: one-way-drums Individual length: on drums or in coils Labelling: acc. to customer specifications SDR types: SDR 33 – SDR 11

Cable conduits made of PE-HD with plug-in sleeve Manufactured acc. to DIN 16876 Standard design: Sleeve type: integrally moulded plug-in sleeve (SM) Sealing ring: compression lip sealing ring, type “SX” (inserted in the factory) Sharp end: with plug-in depth marking and chamfer Length: 6 m Colour: black Inner surface: smooth Possible designs: Quality: DIN 16874 Length: 1 m to 6 m Coloured stripes: co-extruded Colour: on request Outer surface: coloured co-extruded or solid dyed Inner surface: inner grooves for reducing the cable pull-in forces Labelling: acc. to customer specifications

Composite cable conduit made of PE-HD with outer corrugation Manufactured acc. to DIN EN 61386-24 Standard design: Type: with outer corrugation and inner pipe Type: 450 N Sleeve type: double plug-in sleeve, sand-tight design Material: PE-HD Length: 6 m Colour outer surface: black Possible designs: Sleeve type: double plug-in sleeve, water-tight design Length: on request Colour: red, yellow, blue, green or orange

Composite cable conduit made of PE-HD with outer corrugation in coils Manufactured acc. to DIN EN 61386-24 Standard design: Type: with outer corrugation and inner pipe Typ: 450 N Sleeve type: double plug-in sleeve, sand-tight design Material: PE-HD Length: 50 m in coils, with inside cable pull-in aid Colour outer surface: black Possible designs: Sleeve type: double plug-in sleeve, water-tight design Length: on request Colour: red, yellow, blue, green or orange

Cable conduits made of PVC-U with adhesive sleeve Manufactured acc. to DIN 16875 Standard design: Sleeve type: adhesive sleeve Sharp end: onesided with chamfer Length: 6 m Colour: black/anthracite Possible designs: Length: 1 m to 6 m Colour: special colours are available in request Labelling: acc. to customer specifications

Cable conduits made of PVC-U with plug-in sleeve Manufactured acc. to DIN 16875 Standard design: Sleeve type: plug-in sleeve Sealing ring: inserted in the factory Sharp end: with plug-in depth marking and chamfer Length: 6 m Colour: black/anthracite Possible designs: Länge: 1 m to 6 m Farbe: special colours are available on request Labelling: acc. to customer specifications

Split pipes made of PVC-U with snap-on locking For the subsequent protection of cables, which have already been laid, or for repairing damaged pipe systems. - sealed against fine sand - reusable - extandable to any length - the joining of the split pipes does not require any tools - a continuous pipeline is achieved by offsetting the top split pipe (no sleeves required) Use as a repair split pipe: Our split pipe is constructed in a way that the locking mechanism is on the outside of the pipe, which means that the inner diameter of 100 mm is fully usable without dimensional limitations. Therefore, the split pipe can be clamped over the defective cable conduit like a plaster over a wound. Standard design: Material: PVC-U Locking system: snap-on lock Colour: grey Length: 3 m Possible designs: Length: 1 m to 3 m Colour: special colours are available on request Labelling: acc. to customer specifications

Split pipes made of PVC-U with H-profile For subsequent protection of cables, which have already been laid, or for repairing damaged pipe systems. - Sealed against fine sand - Reusable - No sleeve required - Extendable to any length - The joining of the split pipes does noch require any tools - A continuous pipeline is achieved by offsetting the top split pipe (no sleeves required) The joining is achieved by connecting the two split pipes. The connection battens (H-profile) are glued on one side. A continuous pipeline is achieved by offsetting the top split pipe (no sleeves required). In addition, the H-profiles can be joined to the split pipes during the final assembly using Tangit plastic glue for PVC-U. Standard design: Material: PVC-U Locking system: H-profile Colour: black Length: 3 m

Split pipes made of PE-HD with snap-on system For the subsequent protection of cables, which have already been laid, or for repairing damaged pipe systems - Sealed against fine sand - Reusable - No sleeve required - Extendable to any length - The joining of the split pipes does not require any tools - A continuous pipeline is achieved by offsetting the top split pipe (no sleeves required) Use as a repair split pipe: Our 120 mm x 5,0 mm split pipe is constructed in a way that the locking mechanism is on the outside of the pipe, which means that the inner diameter of 110mm is fully usable without dimensional limitations. Therefore, the split pipe can be clamped over the defective cable conduit like a plaster over a wound. You don’t need to saw off the damaged pipe section! Standard design: Material: PE-HD Locking system: snap-on locking Colour: black Length: 3 m

Split Pipes made of PP with clamp locking For the subsequent protection of cables, which have already been laid. - Sealed against fine sand - Reusable - Including moulded sleeve - Extendable to any length - The joining of the split pipes does not require any tools - Can be angled by 10° per meter in each direction - 3 red locking clamps are pre-mounted Standard design: Material: PP Locking system: clamps Colour: black Length: 1 m

Cable cover plates Manufactured acc. to DIN 54841-5 Standard design: Material: PE-HD Lengths: 1.000 mm Surface colour: red Thickness: 2 mm Labelling: Achtung Starkstromkabel Longitudinal locking: using the Z.I.S. Easy Lock System Possible designs: Cover width: 100 mm to 300 mm Length: 300 mm to 3.000 mm Thickness: 1 mm to 3 mm Material: PE-HD or PVC-U Colour Surface: yellow, blue, green, orange, black Longitudinal locking: with or without Z.I.S. Easy Lock System Labelling: acc. to customer specifications

Cable cover plates with increased mechanical protection Manufactured acc. to DIN 54841-5 Standard design: Material: PE-HD Length: 1.000 mm Surface colour: red Thickness: 10 mm Labelling: Achtung Starkstromkabel Longitudinal locking: with punched holes and connection pin Possible designs: Cover width: 100 mm to 290 mm Length: 300 mm to 3.000 mm Thickness: 3 mm to 12 mm Material: PE-HD or PVC-U Surface colour: yellow, blue, green, orange, black Longitudinal locking: with or without punched holes and connection pin Labelling: acc. to customer specifications

Standard design: Material: PE-HD Length: 1.000 mm Surface colour: red Thickness: 2 mm Labelling: without Longitudinal locking: using the Z.I.S. Easy Lock System Possible designs: Cover width: 40 mm to 111 mm Length: 300 mm to 3.000 mm Thickness: up to 3 mm Material: PE-HD or PVC-U Surface colour: yellow, blue, green, black Longitudinal locking: with or without Z.I.S. Easy Lock System Labelling: acc. to customer specifications

Gabled cable cover Manufactured acc. to DIN 54841-5 Standard design: Material: PE-HD Length: 1.000 mm Surface colour: red Thickness: 2 mm Labelling: Achtung Starkstromkabel Longitudinal locking: using the Z.I.S. Easy Lock System Possible designs: Cover width: 100 mm to 220 mm Length: 300 mm to 3.000 mm Thickness: 1 mm to 3 mm Material: PE-HD or PVC-U Surface colour: yellow, blue, green, orange, black Longitudinal locking: with or without Z.I.S. Easy Lock System Labelling: acc. to customer specifications

Cable cover tape manufactured acc. to DIN 54841-5 Standard design: Material: PE-HD Roll length: see below Surface colour: see below Thickness: see below Labelling: Caution – High-Voltage Cable Possible designs: Cover width: 50 mm to 300 mm Length: 25 m to 100 m Thickness: 1 mm to 7,5 mm Surface colour: red, blue, green, black Longitudinal locking: with or without (> 3 mm without) Labelling: acc. to customer specifications

Corrugated cable spacers We recommend the use of our Z.I.S. Kunststoff corrugated cable spacers for laying cables, wires and pipes next to each other while ensuring the required distance between them (e.g. separation of high-voltage and low-voltage cables). Standard design: Material: PVC-U Colour: black Length: 1 m Possible designs: Colour: on request Length: 0,25 m and 1,5 m

Pole and wall channels Z.I.S. Kunststoff cable channels for wooden poles made of PVC-U offer reliable protection for your cables and wires against external influences. They are highly resistant against impact, sunlight and weather. Standard design: Material: PVC-U Colour: grey Length: 3 m Mounting: bores with a 7 mm diameter Possible designs: Colour: on request Length: on request Labeling: acc. to customer specifications

Cable conduits made of PP with plug-in sleeve Manufactured acc. to DIN 16878 or prEN 14285 Standard design: Sleeve type: integrally moulded plug-in sleeve (SM) Sealing ring: compression lip sealing ring, type “SX” (inserted in the factory) Sharp end: with plug-in depth marking and chamfer Length: 6 m Colour: black Inner surface: smooth Possible designs: Length: 1 m to 6 m Coloured stripes: co-extruded Colour: on request Outer surface: coloured co-extruded or solid dyed Inner surface: inner grooves for reducing the cable pull-in forces Labelling: acc. to customer specifications

Gabled cable cover on roll Manufactured acc. to DIN 54841-5 Standard design: Material: PE-HD Roll length: 25 or 50 m Thickness: 2 mm Surface colour: red Labelling: Achtung Starkstromkabel Longitudinal locking: using the Z.I.S. Easy Lock System Possible designs: Cover width: 100 mm to220 mm Length: 25 m to 50 m Thickness: 1 mm to 3 mm Surface colour: yellow, blue, green, orange, black Longitudinal locking: with or without Z.I.S. Easy Lock System Labelling: acc. to customer specifications

Self-adhesive PVC rigid profiles for quick and clean finish to window installations, covering the joint between the window frame and wall, and also as wall connection profiles for interior fittings. Profiles in PVC U window grade, new materials. Suitable for interior and exterior bonding. Acrylate foam tape grades; weather and ageing-resistant, permanently elastic. Follow the cleaning instructions for the window frame profiles.Wood and single-colour decorative strips coated with weather and ageing-resistant Renolit MBAS or Cova foil.

The CETATEST 715 series includes fully automatic working leak tester for the detection of untight parts within the cycle time of the production process. The leak tester uses a gauge pressure sensor and has a large measurement range. Therefore the CETATEST 715 is especially qualified for the simple testing of parts with large leakages, as they occur in the testing of valves. The test types "sealed component" and "dynamic pressure" can also be integrated. Typical applications: Testing of sanitary fittings, plastic welds, check valves Operating methods: Single-channel operation, two-channel operation The measurements in two-channel operation are synchronous. Measurement ranges: Max. +/-10,000 Pa Result units: Pa, hPa, PSI, Pa/s, hPa/s, mbar*l/s, ml/min, ml/h, l/min, l/h, mmHg, mmWs, Torr Pressure ranges: -1 bar, 200 mbar, 1 bar, 6 bar, 10 bar, 16 bar, 20 bar, negative gauge pressure and positive gauge pressure ranges can be combined.

Excellent callus plane with plastic handle fits well in the hand and removes strong calluses on the feet.